Om Electronics

Category 5e+ STP Solid Cables. Applications. Digi-Link P200 Horizontal cables support all presently available LAN applications, including the following

DIGILINK E400 unshielded copper RJ-45 keystone jack series includes high performance Category 5e+snap-in 8-position/8-contact (8P8C) jacks conforming to IEC 60603-7-2 (unshielded 100 MHz connectors). DIGILINK E400 jacks are designed for fast and easy snap-in and out of wall plates and patch panels. All DIGILINK E400 jacks are designed in a 180° form and are available with back interconnection of 110 IDC blocks or special LSAPlus/ 110 IDC combination blocks in T568A, T568B. All jacks fully conform to ANSI/TIA/EIA-568-B.2 Category 5e+, CENELEC EN 50173 and ISO/IEC- 11801 (2nd Edition) requirements. DIGILINK E400 unshielded copper RJ-45 keystone jack ensure long lasting high-performance.

APPLICATION

FOR BACKBONE

CONSTRUCTION :

 

Specification   :   4x2x0.51

 

Conductor      :   Nominal 0.51 MM Soft Plain Copper

 

Insulation       :    Nominal 0.9 MM Polypropene

 

Sneath           :     Nominal 0.5 MM Thick PVC Coating

 

Print               :    Enhanched CAT5e 4x2xAWG24/1'

 

 

Technical Specification :

 

Conductor Resistance (Max.)     :  185 OHMS /Km.

 

Cable Attenuation (100 MHz)    :   22.0 db per 100 Mtrs.

 

Next(100 MHz)                            :    34.0 db per 100 Mtrs.

 

Return Loss(>100 M LENGTH)   :     23.0 d

 

Test Voltage (1.MIN)                   :     rms 500 V

 

Mechnical Data :

 

Cable Coding

 

Pair 1  :  Blue-White/Blue Lining

 

Pair 2  :  Orange White/Orange Lining

 

Pair 3  :  Green White/Green Lining

 

Pair 4  :  Brown White/Brown Lining

 

PACKING

 

305 Mtrs. Box

100 Mtrs. Box

50 Mtrs. Box

25 Mtrs. Box

The quality of the data transmission depends upon the performance of the components of the channel. So to transmit according to CAT6 specs, jacks, patch cables, patch panels, cross-connects, and cabling must all meet CAT6 standards. (The channel basically includes everything from the wallplate to the wiring closet.) The CAT6 components are tested individually, and they are also tested together for performance. In addition, the standard calls for generic system performance so that CAT6 components from any vendor can be used in the channel.

CAT6 channel transmission requirements should result in a Power-Sum Attenuation-to-Crosstalk Ratio (PS-ACR) that is greater than or equal to zero at 200 MHz.

Cat 6 Shielded Cable is used in network applications such as 10Base-T, 100Base-T, 1000Base-T Ethernet technology to 100 meters (328 feet). (Ultra Enhanced 250MHz LAN Cables) Local Area Network Cable For Structured Cabling.

Application

 

For Stringent Specification    :   145 OHMS /Km. 20.2 db per 100

Specification   :    4x2x0.58

Conductor       :    Nominal 0.58 MM Soft Plain Copper

Insulation        :    Nominal 0.95 MM Polypropene

Separtor: Extruder Pair Seprator  For Improved Next

Screen            :     0.5 MM Tin Copper Drain Wire& Aluminium

Sneath            :       Nominal 0.50 MM Thick PVC Coating

Additional  S. S. Braid & PVC Coating For Protection

 

Technical Specification :

 

Construction:

 

Conductor Resistance(MAX.)     :   Mtrs. 45.0 db per

Cable  Attenuation (100 MHz)    :   100 Mtrs. 23.0 db

Next (100 MHz)                          :    rms 500 V

 

 

Product Specification :

 

• 4 Pairs

• Shielded twisted pair

• Cat 6 Solid

• 4 pairs 23 AWG

• Cat6 Future proof

 

Mechanical Coding

 

Cable Coding Pair 1

PAIR 2

PAIR 3

PAIR 4

 

Packing 305 Meters Coil

Category 6 cable, commonly referred to as Cat 6, is a cable standard for Gigabit Ethernet and other network Phycial  that is backward compatible 

 

For stringent specification

 

Construction:

 

Specification    :     4x2x0. 58

Conducton         :     nominal0. 58 mm soft plain

Insulation          :     nominal0. 95 mm polypropylene

Seperator         :     extruded pair seperator

Sneath                :      nominal0. 50mmthickpvc coating

Print                    :      "super speed gigabit utp"

 

Technical specification

Conductor resistance (max. )    :    145 ohms/km.

Cable attenuation (100 mhz)       :    20. 5 db per 100

Next (100 mhz)                                  :    mtrs. 44. 3 db per

Return loss (>100 m length)      :    100 mtrs. 23. 0 db

Est voltage (1. Min)                       :     rms 500 v

 

Product specification :

 

4 pairs, unshielded twisted pair cat 6

solid 4 pairs 23 awg cat6 • future proof

 

Mechanical data :

 

Pair1    :   blue-white/ blue lining

 

Pair2    :   orange-white/orange lining

 

Pair3   :    green-white/green lining

 

Pair4   :    brown-white/brown lining

RG-59/u is a specific type of coaxial cable , often used for low-power video and RG signal connections. The cable has a characteristic impeadence  of 75 ohms the 75 ohm impedance matches a dipole antenna in free space. "RG" was originally a unit indicator for bulk radio frequency (RG) cable in the u. S. The suffix "/u" means “for general utility use. ” the number "59" was assigned sequentially. The "RG" unit indicator is no longer part of the jets system (mil-std-196e) and cable sold today under the rg-59 label does not necessarily meet military specifications.

RG-6 is a common type of coaxiial cable used in a wide variety of residential and commercial applications. The term "RG-6" itself is quite generic and refers to a wide variety of cable designs, which differ from one another in shielding characteristics, center conductor composition, and dielectric type. "RG" was originally a unit indicator ("radio, general") for bulk radio frequency (RF) as assigned sequentially. The "RG" unit indicator is no longer part of the jets system (mil-STD-196E) and cable sold today under the RG-6 label does not necessarily meet military specifications.