IndiaMART.com
Company Directory  > Scientific Instruments & Supplies  > Sensors & Transducers  >
Share:

Onexis Automations Private Limited

Noida, Uttar Pradesh

Year of Establishment: 2003
IndiaMART Member Since: 2005
Products [23]
Phone: +(91)-(11)-42487038

HOME

ABOUT US

PRODUCTS & SERVICES

CONTACT US

SEND ENQUIRY


Products & Services

Controllers & Recorders (1)

Electrical Actuators (3)

Enclosures & Accesories (1)

Pneumatic Instruments (6)

Safety & Service Valves (for PH & Pressure Transmitters) (1)

Sensors For On-Line Applications (5)

Transmitters (5)

Resistance Monitor (1)


Sitemap

Sensors for On-Line Applications

These sensors are designed for rugged service in submersion or on-line applications. The reference cell features a Double Junction design for extended service life in harsh applications.


Colour Sensor

Colour Sensor
Our HK7 Spectralphotometer is measuring the remissions values by illuminating the measuring area over the entire spectrum (from infrared to ultraviolet) of the visible light. Thus the exact position of the colour in the colourspace can be defined and color deviations from a measuring point to the reference be computed. Cost-effective production also means ensuring consistent color throughout the run without lengthy machine stoppages for checks or upgrades. In other words, you need to be able to identify and correct even the smallest color deviations immediately on the fly. Our HK7 spectralphotometer gives you savety: By a continuous on-line colour measurement of your product you have at any time the desired parameters. The CIELAB-System is a colour space, which was specified by the International Commission on Illumination CIE (Commission Internationale d'Eclairage) in the year 1976. It was further derived from the CIE colour system and is based on the CIE “master” space which was introduced in the year 1931. CIELAB system is today the most common colour system. On the basis of this equipment independent 3D-colour model, colour differences can be identified numerically. The model is impartial and complies nearly the human perceptiveness, by adapting the geometrical distance between two colours in the colour space with the human perception

Fuctionality:

Continuous, controlled LED illumination and identification of the product colour in the colour space after CIELab. The evaluation results in the visible light sector from 390 - 720 nm. The distance between sensor system and product has to be kept obligatory absolute non-varying.

The colour evaluation, that ist the output of the measurement results, occures in 4 channels: L*, a*, b* and dE*.

 
 

Microwave Concentration Sensor

Microwave Concentration Sensor
  • Concentration & Total Solids measurement
  • Newest digital microwave engineering at 10/24 GHz
  • Particularly designed for the measurement in thin layers
  • No wear
  • No maintenance necessarily
  • Vibrations do not have an influence on the result of measurement

HK1-M Concentration & Total Solids Sensor:
Due to the robust and modular design the microwave measuring instrument HK 1-M is particularly suitable for the measurements of water content in the food- , primary and chemical industry.
The HK-1 Microwave Transmitter for measuring the Moisture in Coal is a continuous measuringsystem that allows for a rapid and accurate measurement. Due to an innovative concept and itssimplicity of use, the HK1 will revolutionize the Real Time Measurement of Moisture in Coal. Theability to quickly collect samples and perform a real time calibration makes the calibration processquicker than ever.


Depending upon operational area following sensors and antennas are used:

  • Pin antennas for the inline measurement in tubes or a tank/vessel
  • Horn antennas for measurement on a conveyor belt
  • Spiral antennas for measurement on a conveyer belt
  • 3A-spiral antennas (with 3A-flow cell) for the measurement in tubes (food industry)
  • Short 3A pin antennas (with flow cell) for the measurement in tubes
  • Mini-spiral antennas (with flow cell) for the measurement in tubes

We advise you gladly which antenna for which application or measuring kind the best results supply.

 
 

Microwave Moisture Sensor

Microwave Moisture Sensor
Water- and moisture measurement newest digital microwave engineering at 10/24 GHz.Particularly designed for the measurement in thin layers no wear no maintenance necessarily vibrations do not have an influence on the result of measurement alternative remote maintenance from a PC or separate operating device

HK-5 Moistor Sensor
The HK5 is particularly designed for the measurement of water or moisture in very thin layers. Since many years many good results are archived in the measurement of paper, cardboard and chip boards. The measurement is directly integrated in the conveyer belt. Depending upon operational area there are up to 4 pairs of sensors used.

HK1-M Moisture Sensor
For measurement of moisture in paper Boards, Thin Sheets, chip boards. For measurement of moisture in bulk material coal, ores, drug, minerals etc on conveyor belt.Due to the robust and modular design the microwave measuring instrument HK 1-M is particularly suitable for the measurements of water content in the food- , primary and chemical industry. The HK-1 Microwave Transmitter for measuring the Moisture in Coal is a continuous measuringsystem that allows for a rapid and accurate measurement. Due to an innovative concept and itssimplicity of use, the HK1 will revolutionize the Real Time Measurement of Moisture in Coal. Theability to quickly collect samples and perform a real time calibration makes the calibration processquicker than ever.

 
 

Microwave Total Solid Sensor

Microwave Total Solid Sensor
  • concentration & total solids measurement
  • newest digital microwave engineering at 10/24 ghz
  • particularly designed for the measurement in thin layers
  • no wear
  • no maintenance necessarily
  • vibrations do not have an influence on the result of measurement
  • hk1-m concentration & total solids sensor
due to the robust and modular design the microwave measuring instrument hk 1-m is particularly suitable for the measurements of water content in the food- , primary and chemical industry.
the hk-1 microwave transmitter for measuring the moisture in coal is a continuous measuringsystem that allows for a rapid and accurate measurement. Due to an innovative concept and itssimplicity of use, the hk1 will revolutionize the real time measurement of moisture in coal. Theability to quickly collect samples and perform a real time calibration makes the calibration processquicker than ever.
depending upon operational area following sensors and antennas are used:

  • pin antennas for the inline measurement in tubes or a tank/vessel
  • horn antennas for measurement on a conveyor belt
  • spiral antennas for measurement on a conveyer belt
  • 3a-spiral antennas (with 3a-flow cell) for the measurement in tubes (food industry)
  • short 3a pin antennas (with flow cell) for the measurement in tubes
  • mini-spiral antennas (with flow cell) for the measurement in tubes

  • we advise you gladly which antenna for which application or measuring kind the best results supply.

 
 

NIR (Near Infrared) Sensor

NIR (Near Infrared) Sensor
NIR (Near Infrared) Sensor For Moisture, Organic Components & Colour
HK4 On-Line NIR based sensors
In the NIR-measurement technology the surface of the product is illuminated by white halogen light. An optical fiber sensor transfers the data, measured after the transmission or reflective principle, to the diode array. A significant higher resolution can define all molecules with an absorption line in the spectrum of measurement. The evaluation with diode arrays realize the measurement of every organic component in the detected spectrum. Mainly this are CH-, NH- and OH-molecules. The simultaneous measurement of up to 4 organic components is realized with an accuracy of 2 nanometers through a high resolution diode array.

A significant higher resolution can define all molecules with an absorption line in the spectrum of measurement. Change of filters is not necessary. The capability, to change the measurement to an organic-component with only one calibration, is an enormous advantage in comparison with classical systems with mechanical band filters. The NIR spectralyser is absolutely maintenance free, no band filters, no motor and no other parts in motion.


Application:

  • Salt - Water Content
  • Instant Poweder- Water Content
  • Oils - TS, Fat & Protein Content
  • Milk - TS, Fat & Protein Content
  • Cream Cheese - TS, Protein & Fat content
  • Yoghurt - TS & Fat content
  • Pastries, Biscuits, Cocoa, Chocolates - Fat conetnt in entrance product.
  • Poultry & Meat Products: Creatin, Collagen, Fat & Water

 
 

 

Related Product Catalogs

Associate Electronics
Exporting and manufacturing holiday detectors, pinhole detectors, prolonged battery holiday detectors, SD-120 holiday detectors, film epoxy coating holiday detectors, DC-10 holiday detectors, DC-05 holiday detectors and compact pinhole detectors.

View more details

Spin Air Systems Coimbatore Pvt Limited
Supplying and manufacturing sensors, temperature sensors, automation temperature sensors, industrial temperature sensors and wood temperature sensors.

View more details

Shree Laxmi Hydro Pneumatic
Established in 2005 we are a leading manufacturer & trader of temperature sensor, measuring temperature sensor and pressure sensors.

View more details

Suggested Companies


Related Categories
Search Suppliers
CompanyProductsTrade Leads
OR


IndiaMARTCompaniesProductsTrade LeadsTendersTrade ShowsTravel
© 1996-2012 IndiaMART InterMESH Limited. All rights reserved worldwide.