Onexis Automations Private Limited

Newest digital microwave engineering
particularly laid out for the brix measurement of sugar
compact designno wearno maintenance necessarily
vibrations do not have an influence on the result of measurement
alternative remote maintenance from a pc or separate operating device (hk6-f)
suitable for product temperature upto 130 °c.

available models

• hk6-c: compact type with integrated electroncis and display
• hk6-f: with remote operating & display unit. Suitable for installation in inaccessible locations
• hk2-m: with sensors and electronics completely separated. Also has optional automated cleaning provision.

brix sensor can be used in following industry:

• suagr mills
• soft drink production
• milk powder production

ketchup production
with our hk6 display software you can verify the measuring results of up to 16 devices at the same time. The instruments will be connected together via optional rs-485 communication port and the measured values will be polled periodically. For a better overview the last 600 values from each device will be plotted in a graph.
every parameter in the hk6 display software is editable. Equipment parameters like the calibration, limits and the current output can be configured via the software and transferred to the instrument. For a check or validation of the connected periphery the software is also able to create defined test currents with just a click

consistency trasmiter:

• hk1- microwave consistency transmitter
• newest digital microwave engineering
• modular setup of evaluation unit and sensors
• no moving parts
• no wear
• no maintenance necessarily
• vibrations do not have an influence on the result of measurement
• alternative remote maintenance from a pc or separate operating device
• hk1-mp is specially designed microwave consistency transmitter for paper mills. The separate electronics and sensors (antennas) make it very suitable for harsh environment and inaccessible locations. Available with three diffrenet sensors (antennas) which are selected based on application:
  

pin antennas for the inline measurement in tubes or a tank/vessel or pipe with more than 200 mm diametershort 3a pin antennas (with flow cell) for the measurement in pipes diameter upto 200 mm
mini-spiral antennas (with flow cell) for the measurement in pipesdiameter upto 80 mm
the microwave measuring instrument hk 1-c is a compact version of our hk 1-m. The instrument is direct installed to a flange (dn 65) with build in sensors.

The series V transmitters for all applications of pressure measurements.The series V transmitters are suitable for the most demanding process environments and they cover all pressure ranges required in the industry.The excellent temperature behaviour, many housing alternatives and the possibility to own user interface are common features for the series V transmitters.With Satron-pAdvisor software and HART -modem it is possible to communicate with transmitters. You can calibrate, configure and diagnose the transmitters easily using Satron-pAdvisor software.For V series transmitters the wetted materials can be chosen from the wide range of options.

VO turbidity and solid content analyzer is suitable for the measurement ofdifferent liquids. Besides for turbidity, colours and solid content matter can be measured. Configuration and calibration can be done by the analyzersown user interface or by PC software throught HART® communication.Satron VO is available also with remote display. Besides of the hygieniccouplings Satron product selection provides also other process connection solutions for VO, e.g. PASVE®The analyzer communicates digitally using the HART protocol.

The series V transmitters for all applications of pressure measurements.The series V transmitters are suitable for the most demanding process environments and they cover all pressure ranges required in the industry.The excellent temperature behaviour, many housing alternatives and the possibility to own user interface are common features for the series V transmitters.With Satron-pAdvisor software and HART -modem it is possible to communicate with transmitters. You can calibrate, configure and diagnose the transmitters easily using Satron-pAdvisor software.For V series transmitters the wetted materials can be chosen from the wide range of options.