Shaker

(improved model ) for 8 ",12" & 18" test sieves
gyratory sieve shaker is driven by ¼ h. P. Electric motor through a reduction gear, can carry upto six , 6" or 8" /12" /18" test sieves with one set of lid and pan . This gyratory motion of the table there is an upward and downward movement but is inclined from the vertical axis and the direction or inclination charges progressively in clockwise direction having frequency of about 270 vibration per minutes. Unit having six stainless steel needles fixed on stainless steel pipe of approx 12. 5 mm dia with side water tap. Tank made of stainless steel. (with timer /without timer)

Rotator shaker is used in blood banks and hematology laboratories for blood typing, cross matching and mixing of donor blood with anti-coagulant, v. D. R. L. Tests and other test.

salient features:-

•	operates at 130/180 rpm (as desired)
•	rotates specimens in horizontal plane in 3/4" circle.
•	30x30cm platform can accommodate slides, blood bottles, flasks & beakers by use of spring bottle holder.
•	constructed of all steel finished with stoved enamel paint.
•	turned up edges and rubber sheeting on platform to prevent slipping of specimen containers.
•	platform rigidly supported by steel legs for smooth and silent rotation and heavy load can easily be supported.
•	shaker mounted on four rubber suction feet to prevent creeping.
•	1/35 h. P. Motor operates on 220/230 volts a. C. Only.
•	supplied with brass ring maker for 12 rings.
•	without thermometer.
•	adjustable 0-30 minute timer with arrangement for continuous operation (optional).

 

models:-
(a)	12" x 12"	(4 flask of 250 ml)
(b)	18" x 18"	(16 flask of 250 ml)
(c)	24" x 24 "	(25 flask of 250 ml)
(d)	36" x 36 "	(36 flask of 250 ml)
	or any non standard size

Heavy duty(Improved Model ) FOR 8 ",12" & 18" TEST SIEVES
The Rotap Sieve shaker is durably constructed and is run by ¼ H.P. Electric MOTOR 220 Volts A.C through reduction gear. Designed to carry upto 6/7 TEST SIEVES of 200 mm Dia (8") with one set lid & pan. It reproduces circular and hammering motion is given at . it reproduce Circular (revolution approx.: 280 to 320 R.P.M and tapping approx.: 140 R.P.M to 160 R.P.M No foundations are required.

(FOR 8" & 12" TEST SIEVES)
(Soundless , Vibration type)
Fitted with F.H.P Electric Motor. It can accommodate 6 Test sieves of 8" Dai with Lid and pan. Speed can be regulated through variable speed regulator to work on 220 volts A.C (without Test Sieves) speed regulator to work on 220 volts A.C

D. C. Motor special system shaker to work on 220 volt a. C. For variable and smooth function speed control by speed regulator.
it is general-purpose machine and found very useful for mixing or agitation ingredients, solution in flasks, bottles, beakers and kahn racks etc. Upper tray covered with rubber floor and sides of the tray are slotted to take parallel and cross bars cover with rubber to hold flasks, bottles beakers, kahn racks etc. The bars are tightened with washers and fly nuts can be adjusted as per the requirement. Cycles single phase (rates are without flasks, bottles, beakers kahn racks)

plate form size
(a) 20" x 13" x 4"
(c) 20" x 13" x 4"
(d) 31" x 17" x 4"
(e) 36" x 18" x 4"