We have an exclusive agreement with pioneers and one of the largest European suppliers of Dispensers viz., FAS, Germany to supply Dispensers and other associated critical Equipments for India and other neighboring countries. Being designed to stringent DIN and European Standards, these Dispensers ensure total safety, reliability and trouble free performance. These equipments are approved not only by stringent German and European Authorities but also carry all necessary statutory approvals in India including Weights & Measures and Explosives Department. We must have supplied almost hundred LPG Dispensers in India for companies like IOCL, HPCL, BGL and BPCL etc. and we are sure that most of these clients would vouch for trouble free performance of these Equipments. The Hydraulic Systems of the Dispensers is unique in its design in terms of high capacity and lowest filling time besides one of the best design available anywhere in the world. Whereas Double Hose Electronic Dispensers are most popular in India we can also supply other designs like Single Hose Dispensers, Compact Auto Gas Filling stations, Economical Model like Magnetic Totalizers, Dispensers complete with Receipt Printer, Card Systems, Modem, Tank Data Process, Processing Software and accounting Systems etc. Some of the major technical features of the dispenser supplied in India:-

• Double Hose Dispenser with Temperature Compensation.


• Flow Capacity 5 LPM to 50 LPM in each Hose.


• Preset via Keyboard.


• Programming with Remote Control.


• Stainless Steel Housing.


• Illuminated LCD Display.


• Preset Drive and Preset Volume Facility.


• Very low maintenance cost and long service life.


• Special protection against net work failure data storage.


• Integrated Diagnosis Systems.


• Double special Piston Meter of capacity 5-50 LPM.


• High Pressure Dispensing Hoses.


• Remote Control.


• Calibrated with LPG.

We are a trusted name in supplying ‘State of Art’ Air Cooled Non-Lubricated Compressor from its U.S Principals M/s.Blackmer, USA. These Compressors are specifically designed for volatile services like LPG/ Propane & Ammonia and whole range of other services. These Equipments are normally used for unloading the product from Tank Lorry / Wagons and for other miscellaneous applications. These Compressors are very compact in design besides being highly efficient. There are different in design/Models so as to suit a wide range of applications. We design, manufacture and supply complete packages including Motors, Electrical Controls, Safety Interlocks and other Accessories. We have supplied Compressors to leading clients in India like Jindal, Maruti Udyog Ltd., Suzuki Automobiles , Vediocon Narmada Glass, Osram & Honda Siel etc. etc. just to name a few. Besides these Compressors, Blackmer also supply HD Series of Industrial Oil Compressors for mechanical petroleum and industrial process applications which can be used for following services:

• Vapor Recovery 


• Gas Gathering 


• Gas Transfer 


• Gas Evacuation 


• Liquefied Gas Transfer 


• Gas Blanketing 


• Pressure Boosting 


• Flare Elimination

These Compressors are suitable for very wide range of services including Nitrogen, R134, NG, NH3, SO2, Air, Chloroform, Refrigerant, Methyl Chloride, CO2, Helium and Propylene etc. to name a few. We expect our esteemed clients to come up with their inquiry and service conditions enabling propose the equipments most appropriate for particular application.

Our Sister Company, M/s. OGPE International is an ‘accredited and approved’ designer and manufacturer of wide range of gas vaporizers for LPG/Propane/Ammonia and other similar services. We manufacture these vaporizers mainly in two designs, that is electrically heated water bath design and steam heated. Both the designs are equipped with all the desired safeties including Digital Temp. Controller, RTDs, Solenoid Valve, Safety Valves, SS Coil, Pressure Switches and Flame & Explosion Proof approved Control Panel. The Steam Heated Vaporizers are manufactured in Shell & Tube type Heat Exchanger design with all the above mentioned safeties – these Vaporizers can also be supplied in the conventional design. The vaporizers are approved by the Chief Controller of Explosives and there are various design and Models available to cater to different flow requirements and clients. We have supplied these Vaporizes to companies like Sterlite Industries, Indian Oil Petronas, Usha Martin, Samtel Colour, JBM Ground etc. to name a few.

We represent Zhejiang Cangnan Instrument, China which has ‘State of Art’ machinery to produce technically advanced flow meter. It is an ISO-9001 and ISO-1400 accredited company and have made a name of itself in the International market for its product range. The main products includes Intelligent Gas Flow Meters, Rotary Gas Meters, Intelligent Swirl Flow Meter, Diaphragm Meters & Heat Meters etc. Such Meters are used at Honda, Suzuki, Indian Oil Petronas to name a few following are the descriptions of two meters:

Diaphragm Type Meters:- The Meters are designed as per GB/T6968 -1997 which is equivalent to OIMLR 31-1995. CNM manufactures Meters from G1.6 to G25. This series of Gas Meters are manufactured of Steel outside casing and are suitable for measuring flow for LPG, Coal and Chemical Gases etc. CNM also manufactures smart card type of meters with complete software and technology.

Turbine type Meters: CNM meters manufactures Turbine Type Meter from 25 mm to 300 mm size for whole range of gases including arduous services like Coke Coven Gas, Ammonia, Chlorine etc. They have a patented technology for manufacturing Intelligent Series of Meters which has in-built Pressure and Temperature Compensation. The Meter has an integrated Smart Volume Corrector which includes Analogue Signal Channel of temperature and pressure, flow rate, Micro-Processor Unit, Driver Circuit at LCD and Interface of output signals and other auxiliaries circuits. The Electronic Corrector gives data/information to suit the client requirements including RS-485 communication interface, Pulse Amplifier etc. The salient features of this turbine type meter are highlighted here below:-

• Precision Grade of having accuracy of 1%


• Inner Power Supply 


• Lithium Battery


• External Power supply


• Very Low Power Consumption 


• Real time Data Base 


• Telephonic Network Communication and Management Software.

We feel very fortunate to represent world’s first leaders in the pumping technology that is Blackmer, USA and France. Mr.Robert Blackmer invented the world first Rotary Vane Pump in 1899, 4 years before incorporation of Blackmer and company never looked back ever since. Its unique ability to self adjusted help Pumps maintaining there optimum flow rate and minimum maintenance. For more than a century, Blackmer had been at the forefront of flow technology problem solving with such innovation as the unique System one line of Pump. Following are various designs of pump we offer:

• Patented Sliding Vane Technology 
• Centrifugal Pumps 
• Peristaltic 
• Hose Pump 
• Air Elimination Systems

We can supply Pumps for very wide range of products including:-

• Paint 
• Ink 
• Coating 
• Soap Solution 
• Sanitary Food 
• Pharmaceutical 
• Cosmetic 
• LPG/Propane/ Ammonia 
• Refined Fuel 
• Lube Oil 
• Cement 
• Plastic Palet 
• Food Grain 
• Fly Ash 
• Potash

Blackmer has supplied these Pumps to all International well known / renowned companies like Nestle India, Cadbury, Shell, General Motors, PPG, Dupont, Exxon, Shavron, Super Gas. We, in India have also supplied hundreds of Pumps for different services to all leading clients/consumers.

We offers various  gas pumping equipment like compressors, exhausts and fans, are essentially required in pumping of various gases in host of applications and in almost every segment of Industry. Although they differ in construction from liquid handling Pump, the principal of operation are similar. Since gases are compressible, a large portion of energy of compression is dissipated in from of heat to gas. So, this limits the operation unless a judicious selection of basic genre is made from among two main options, viz., Positive Displacement or Non-Positive Displacement type besides factors such as efficiency, simplicity in design & maintenance and of course Life Cycle Cost from among other criteria. A Multistage Centrifugal Blower with its easy to maintain, just two out board bearing, is best suited for large flows up to 70,000 SCMH, Pressure Rise up to 1.5 bar g or vacuum up to 16 inch Hg in handling Air and Non Aggressive Gases. This application is best met with Blower and Exhausts manufactured by Continental Industries, France(www.continental-industrie.com) for over 35 years. Surge Prevention & Control and VFD options besides Instruments, accessories,regulation & control panel are also available for tailor made applications. However, much larger flows upto 280,000 SCMH and pressure rise upto 5 bar g can be met with Integrally Geared, Single or Multistage Centrifugal Compressors compliant with API 617 and manufactured by Howden Donkin Blowers, England for over five decades. Integrated lubrication System, Instrumentation & Protection Devices including ‘State of Art’ Control Systems are standard features. Above Centrifugal Blowers can be tested per ASME PTC 10 under TPIA as an option. Special drives such as V-belt and gear box for Continental Industries m/cs. besides Gas & Steam Engine arrangements are also available on request in addition to electric Motors.

We represent world leaders and well established designers and manufacturers of high quality and reliable Gas Leak Detection System and devices from M/s. New Cosmos Electric Co. Japan. Cosmos manufactures and supplies very compact and reliable gas leak detection Systems for detection of wide range of gases in all possible designs including :

• Semiconductor


• Catalytic Combustion


• Thermal Conductivity


• Galvanized cell


• Pyrolysis


• Controlled Potential Electrolysis etc.

The system is equipped with a Control Panel complete with all accessories including battery charger, LCD bar graph level meter with audio visual alarm functions and in some cases with RS 232/RS 485 output. We can supply both stationary and portable hand held gas leak detectors. We can supply Systems to handle wide range of gases including hydrogen, Methane, LPG Acetylene, Ammonia, Chlorine, Hydrogen Cyanide, Phosgene, Fluorine, Nitrogen Dioxide etc. besides odor sensing and Oxygen deficiency. Leak Check-up Device: Almost all Gas Leak Detection, Monitoring and Alarm Systems are of “invasive” type by their very design and costly affairs. Such systems are hardly affordable by small & mid size commercial establishments and common households expressly using gaseous fuels for their cooking and heating requirements, in particular LPG whether directly from cylinders or piped or piped NG from the City Gas Distribution System. “Gasbangwoori” is the Korean nick-name for this device called Leak Check-up Valve. This device checks a gas leak visually, as small as I cc, with-in one second and even before the gas has leaked and shut-off during free flow condition. Typically, this is used to detect leakage after the regulator and the gas stove including its inter connecting rubber tube, but in a multi-storey metered piped gas system to physically check for leakage even before the Under Pressure Cut Off (UPCO) reaches the thresh hold limit.

‘Synthetic Gas’ is a mixture of LPG/Propane and Air or for that matter any flammable gas with air in such ratio so as to have same burning characteristic as that of Natural Gas. Such Systems are used to cater to both base load applications as well as standby Systems depending on the System requirements and logistics. We have been honored of representing ourselves as one of world’s largest manufacturers of LPG-Air Mixing System for last more than two decades. Algas-Samdick Industries have patented Systems called ‘Blendaires’, ‘Vaporaire’ and other similar variants to safely and accurately mix LPG vapour with Compressed Air to deliver a Natural Gas compatible mixture at pressures ranging from 6 psig. to 150 psig.

The LPG-Air Mixture, such created, has the same burning characteristics and efficiency as Natural Gas without requiring any Burner adjustment. They can supply systems of varying capacities and pressure, starting from a small ‘Vaporaire’ to supply gas to a furnace right upto a very large Blendaire which supplies high pressure gas to feed city utilities or supplement Natural Gas pipeline distribution. All such systems have in-built safeties and approvals from all international Statutory Authorities. Whereas critical equipments are supplied by our principals; we have complete technology and expertise in designing and setting-up complete Systems including Pumps, Vaporizers, Calorimeters, Vaporizers etc. so as to give single point suitable solution to the client. We are possibly the first company in the country to have installed a LPG Air Mixing System for JCT Electronics Ltd., way back in 1987. Ever since then we have installed quite a few Systems for companies like Samtel Colour, Videocon Narmda Glass, Hindustan Zink, BPL etc. etc. to name a few.

Internal and external Floating Roof Tanks require sealing systems comprising primary, secondary combination double seal arrangement depending on the volatility, toxicity and of-course cost of the crude & refined petroleum products. In addition, the external floating roof tanks also require efficient and safe roof drainage systems to avoid sinking of the floating roof and prevent product spills with context to safety, health and environment hazards. Petroleum Seal and Systems, England www.pss-seals.co.uk is world’s largest specialist manufacturer of Floating Roof Tank Seals, Roof Drainage Systems, Aluminum Internal Floating Covers, Aluminum Dome Roofs and Leg Vapor Seals with an in-house integrated production facility to manufacture all the polymeric and metallic parts for supply of various Systems in finished and CKD condition to simplify installation in-site, this saves at least 20% of cost and time at site besides accurate fitment for enhanced life. Petroleum Seals and Systems is a Global Player – customer base in more than 85 countries - includes all the multinational oil companies: BP, Chevron, Exxon, Gulf, Mobile, Petrofina, Shell, Texaco, Total besides IOCL,CRL etc., Tank Building Engineering Contractors and many more. The Primary Sealing Systems include all traditional mechanical shoe, liquid filled and foam filled design - suitable for vapor or product mounting. The Secondary Sealing Systems include conventional single wiper & double wiper seals with combination Compression Plates besides Patented and ‘State of Art’ tight fitting PSS-50 Secondary Seal, fully compliant with API 19.2 and well known for negligible product loss and efficient protection against RIM FIRES – these are just a few among several of it’s outstanding features not available with any other contemporary Seal. The Double Seal is a modern design based on combination PSS 50 Secondary Seal.

With supportive and experienced technocrats, we take keen initiative in setting up gas storage plant which includes, gas storage systems and bottling plants. We specialize in setting up bulk gas storage and distribution plants including auto LPG dispensing systems and bottling plants as also fuel handling systems on total turn-key basis i.e. from concept to commissioning. Over the years, we brought to our credit more than 400 complete plants executed for a very wide spectrum of Industry starting from a tiny 2 x 5 MT LPG storage to a very sophisticated LPG storage plant comprising of imported compressors, vaporizers and LPG air mixing system etc. We have kept pace with change in technology and have in house technical know how to design, supply and install gas storage systems in overground/ mounded or underground construction.

In the present scenario, Auto LPG Dispensing Stations (ALDS) is a very common name in the Indian Industry. Its our fortune that we are the first company in India to have designed and set-up ALDS system way back in 1997 for M/s.Supergas, when the concept was alien to many. We have a Technology Transfer Agreement with pioneers in the field with our German Principals, M/s.Flussiggas Anlagen GmbH (FAS), who are world renowned name in the field of Auto LPG Dispensers and Systems. The German technology, although little expensive, ensures a very well designed equipment as per DIN and other European Standards, ensuring safety and utmost performance. We have come a long way, ever since, being fully associated with development of the industry in the country and have more than 100 installations to our credit as of now. Most of these Systems have been installed for Public Sector Undertaking like IOCL, BGL & HPCL etc. but we are now in the process of signing long term agreement with private players in the field as well. We are excited to be a part of this industrial movement, which besides providing a cheaper alternative to conventional fuel, helps conserve the environment as well - something of prime concern to everyone today. All our clients for the ALDS Systems can easily justify with our timely completion, satisfactorily performance and trouble free performance. Undoubtedly, we also had some teething problems in the beginning but have had taken this as a challenge which has helped us to improvise the technology. Other than setting-up such Systems on total turn-key basis, we also supply loose Equipment like LPG dispensers, submersible pumps, unloading pumps, top mounted transfer pumps, tank management systems, mass flow meters, smart hoses, control boxes, dry run boxes and whole lot of other Equipments for such ALDS Systems.

We, OGPE have an in-house design, technology and manufacturing capability for setting and installing Pressure Regulating and Metering Skid for Natural Gas, LPG, Coke Coven Gas and other similar services. We have been associated in designing and supplying systems in association with overseas companies from U.K and Europe.

We have been manufacturing such PRS and MS ever since the introduction of Natural Gas in the Indian industry and had the privilege of designing a large Pressure Regulating cum Metering Station of 20,000 NM3/Hr. for very demanding and arduous service viz., Coke Coven Gas Application, besides of course setting-up such Systems for conventional gases like LPG. The systems can be designed in Active/Monitor/Slam Shut/ working/ standby or any other design to suit client’s requirements. Such Pressure Regulating Stations have in-built safety Interlocks and Metering Stations, depending on client’s requirements.