We offer our esteemed clients quality nickel alloy that are immensely used in different industries. Available in standard specifications (shapes, sizes, material, and quality) we also have the ability to offer customized solution for the product as per our clients’ specifications.

• Inconel Alloy 200  :Commercially pure nickel with good mechanical properties and excellent resistance to many corrosive media. Important characterstics are its magnetic and magnetosphere properties, the high thermal and electrical conductivity at low gas content.
• Inconel Alloy 201  Alloy 201 is a low carbon modification of Alloy 200. This alloy has a low annealed hardness and very low work- hardening rate that is desirable for cold forming operations such as deep drawing, spinning, coining, etc. It has been used in corrosion-resistant equipment such as caustic evaporators, in spun anodes,combustion boats and laboratory crucibles, and electronic components where its excellent fabricating characteristics provide some advantage.
• Inconel Alloy 400 :Alloy 400 is especially resistant to saline and other acids in ventilated condition. It is successfully employed in the salt winning process. Alloy 400 is especially suited for employment in sea breakage water at high speed, where resistance against cavitation and erosion is of great importance. This alloy is very resistant to solvents, glass-etching agents, sulfuric and other acids and virtually to all alkalis.This grade is not sensitive to stress corrosion cracking in oxidising media. Alloy 400 can be employed at temperatures up to 550 degrees celsius.
• Inconel Alloy K-500 :Alloy K-500 combines the excellent corrosion resistance characteristic of Alloy 400 with the added advantages of greater strength and hardness. The increased properties are obtained by adding aluminum and titanium to the nickel-copper base, and by heating under controlled conditions. The thermal processing used to effect precipitation is commonly called age hardening or aging. Alloy k-500 retains its strength up to temperature of about 650 degrees Celsius.
• Inconel  Alloy 600 :Alloy 600 has excellent has excellent resistance to oxidation at temperatures upto 1175 degrees celsius and is also resistant to a variety of corrosive media. It retains its high strength uo to about 650 degree celcius. Even at lowest temperatures, alloy 600 has good mechanical properties. Due to its resistance to chloride stress corrosinon cracking, alloy 600 is employed in components of power plants. This grade can be welded without thermal retreatment.
• Inconel Alloy 601 :Alloy 601 has very good properties at high temperature and is oxidation resistant as well ws scale resistant at temperatures of up to 1250 degree celcius. The high chromium content results in good resistance against oxidation, carburisation and sulfurious media. The aluminum and nickel content result in a further improvement of the oxidation resistance.
• Inconel Alloy 625 Excellent corrosion resistance with high strength and ductility at temperature upto 700 degree celcius- applicable upto 1100 degree celcius. Alloy 625 is weldable without thermal retreatment. Alloy 625 is a nonmagnetic , corrosion - and oxidation-resistant, nickel-based alloy. The alloy has excellent fatigue strength and stress-corrosion cracking resistance to chloride ions. Some typical applications for alloy 625 have included heat shields, furnace hardware, gas turbine engine ducting, combustion liners and spray bars, chemical plant hardware, and special seawater applications.

We are engaged in offering quality nickel duplex bar, which finds wide application in several industries across the globe. Sourced from trusted manufacturers these duplex is extensively used for high tensile strength, corrosion resistance and durability. These duplex bars are accurate in dimensions and are offered to our clients in several standard and customized specifications. Following are the grade available:

2205 Duplex : A widely used duplex steel combining high strength and corrosion resistance in various organic acids, anorganic acids, aggressive coolingwaters and hydrous H2S/NaCl mixtures. With a near equal mix of austenite and ferrite, they give yield strength 30% higher and tensile strengths marginally higher than comparable nitrogen-containing austenitics. High resistance to general corrosion and specifically to pitting and crevice corrosion. Their resistance to stress-corrosion cracking in neutral chlorides is superior to that of the austenites.

2507 Super Duplex : UNS S32750 (2507) is a super ferritic-austenitic grade with high mechanical properties and superior corrosion resistance. Besides the ferritic-austenitic structure, 2507 has an excellent resistance to pitting and crevice corrosion and is therefore particularly suitable for sea water applications and for process systems on off-shore platforms, respectively in all situations where there is a risk of stress corrosion. The high tensile properties are twice comparing with TP 316 L stainless steel.

Characteristics  : Duplex alloys are essentially a compromise possessing some of the ferritic stress corrosion cracking resistance and much of the superior formability of the common austenitic stainless alloys, at a cost saving over the high nickel alloys.
With its high level of chromium, Super-Duplex steel provides outstanding resistance to acids, acid chlorides, caustic solutions and other environments in the chemical/petrochemical, pulp and paper industries, often replacing 300 series stainless steel, high nickel super-austenitic steels and nickel-based alloys.

We are one of the leading suppliers of titanium that has gained wide appreciation in the international market. Procured from established vendors our array is in conformation with international quality standards and finds wide application in diverse industries. Our cordial association with reliable manufacturers enables us to offer titanium as per the specifications of our clients.

Titanium is a light metal highly resistant to corrosion. Titanium is highly resistant to heat with a melting temperature as high as 1668 . Its melting point is higher than that of steel. Although heat conductivity of titanium is almost the same as that of stainless steel, its weight is almost half of stainless steel. Titanium is also non-toxic and non-allergenic, often used in piercing jewelry.

Outstanding Corrosion resistance : Titanium is immune to corrosive attack by saltwater or marine atmospheres. It also exhibits exceptional resistance to a broad range of: Acids, Alkalis, Natural waters, fresh and salt, Corrosive gases, Reducing atmospheres,Passivation with inhibitors  and Organic Media

Chemical Composition

Material	UNS no.	Werkst. Nr.	C Max	Fe Max	H Max	N Max	O Max	V Max	Al Max	Ti
Grade 2	R50400	3.7035	0.10	0.30	0.015	0.03	0.25	—	—	REST
Grade 5	R56400	3.7165	0.10	0.40	0.015	0.05	0.20	3.5 - 4.5	5.5 - 6.75	REST

Physical & Mechanical Properties

Material	Density gm/cc	Min.Tensile (KSI).	Min.Yield (KSI)	Hardness	Modulus of Elasticity	Poisson’s Ratio
Grade 2	4.51	50	40	14.9	103 GPa	0.34 - 0.10
Grade 5	4.45	130	120	16.4	114 GPa	0.30 - 0.33