Analgesiometer, Eddy's hot-plate performs rapid and precise screening of analgesic drug properties on small-laboratory animals according to the hot-plate test. The alterations of animal pain sensitivity induced by a specific experimental context change and/or genetic manipulations can also be evaluated by using this method.

Features:

• Thick pure aluminum plate (12mm) provides a very high temperature stability and even surface distribution.
  
• Plate temperature can be held at a set point between above ambient to 70°C (+/- 0.2ºC).
  
• A built-in timer activated by an external foot switch allows the precise measurement of the reaction time (0.1 sec resolution).
  
• Remote foot-switch controls the test start/stop allowing rapid Hands-free experiments.
  
• Provided with the calibration certificate of the temperature indicator.
  

All Purpose equipment are mainly used in pharmaceutical department. It comprises of the following accessories as:

• Ball Mill
• Coating Pan
• Polishing pan
• Double Cone Blender
• Triple Roller Mill
• Dry Granulator
• V Blender
• Cube mixer
• Spraying Gun

The above mentioned accessories can be attached to the main drive through universal gear box or directly. All the pharmaceutical equipment are designed in the capacities of 1kg approximately for R & D purpose and for lab scale.
The main drive is provided with digital RPM indicator, digital temperature indicator, digital timer and hot air gun pipe for coating pan.

Our fume hood is high in demand in domestic and international marketplace all across the world. To optimize airflow and to give best dilution and extraction of harmful fumes, we have designed our bypass fume cupboard. These can operate with a constant exhaust volume. It is fabricated in such a manner that when the sash is closed, the bypass opens and suction is redistributed between the sash ants. The bypass thus eliminates excessive velocities at closed sash position. Also, high race velocities can be detrimental to certain laboratory procedures.

Features:

• Auto Bypass
  
• Aerodynamic design
  
• Made of powdered coal
  
• Galvanized steel internal
  
• Corrosion resistant
  
• F&P work walls
  
• Easy to clean
  
• Black-Fet granite worktop
  
• Toughened glass
  
• Acrylic front
  
• Electrical plug points
  
• Shutter service fixtures with sink, water tap & gas connection
  
• Tubelight for bright illumination of work area
  
• Digital timer apparatus holding grid
  
• Silent inbuilt blower-temperature indicating probe and digital indicator
  

This is the only infra-red actimeter system available in combination with hole board apparatus, used to measure the spontaneous activity by means of infrared beams. Orchid’s Infrared (IR) Actimeter represent an ideal tool for assessing loco-motor activity and exploration in rodents. The system represents a reliable system for easy and rapid drug screening and phenotype characterization in both day and night lighting conditions.

The system may be used for evaluation of:

• General activity (one or several animals)
• Locomotor and Stereotyped movements
• Rearings
• Exploration/curiosity (nose-spoke detection in the hole-board option).

The IR Actimeter system is basically composed of one square frame, frame stand and hole board plate. The frame is equipped with 32 infrared photocells, 16 placed in axis X and 16 placed in axis Y. The Photocell work at a wavelength of 950 nm and its information is multiplexed at a rate of 40Hz. Hole board plate is provided with 16 holes of diameter and detection depth 1 cm.

This is the only rotarod apparatus available which can be used for mice as well as rats. Rota-Rod provides an easy way to test the motor function in rodents. Drugs administration, central nervous system damage or disease effects on motor coordination or fatigue can be assessed by measuring the time during which the animal remains walking on a rotation drum.

Features:

• Individual time counters (9999 seconds).
• Digital RPM indicator and digital time counters.
• Each counter runs from the beginning of the test until the animal falls from the drum to the lane.
• Electronic change of speed from 4 -120 rpm.
• Nontransparent partition.
• Instruments can be used for mice as well as for rat- just by changing central rod.
• Easy replacement of the central rod for mice or for rat as per requirement.

Electro convulsiometer is used for applying maximal electro-shock through corneal electrodes provided. Instrument is used to study the anticonvulsant activity of phenytoin against maximal electro-shock induced convulsions in rat. The instrument is provided with:

• Digital Voltmeter
• Analog Type Ammeter
• Analog Timer
• Multiplier
• Three pair of Corneal Electrodes.

We offer a spectrum of animal cages, feeding needles & animal holders that are widely catered in domestic and international marketplace. Our animal products includes:

Mice & Rat Cages: Mice and Rat cages are avialble in polypropylene material with S.S top grill and has the following features:

• Mice cage: Size 29x22x14 cm
• Rat cage: Size 43x27x15 cm

Rat Metabolic Cage: The size of rat metabolic cage is 8” x 10 ½” x 16 ½” (LxBxH). This metabolic cage for rats enables collection of behavioral information, urine and feces. Made in S.S 304 quality material & Polycarbonate material. It also includes feed compartment and water feeding unit.

Rabbit Cage: Fabricated with complete AISI S.S 304 quality material, including removable bottom tray for refuse disposal, spot welded wire grid floor, food hopper, grass stand, bottle holder with bottle & siphon tube and data label holder. It has the following features:

• Cage size: 24” x 18” x 18” (LxBxH) (Standard Cage)
• Cage size: 48” x 18” x 18” (LxBxH) (Nursing/Breeding Cage), including Central Cage Partition for seperation of Nursing mother.

Oral Feeding Needles: For Mice, Rats & Rabbits.

Animal Holders: Most suitable for holding rat or mice for IV injection procedure using the tail vein. Made of entirely clear see-thru acrylic plastic with mechanism to adjust the length of the chamber with turn of a knob.

• Available for Mice (15 to 30 gms.)
• Available for Rat (110 to 300 gms.)

Rabbit Holder (Restrainer): To hold rabbits securely, safely & humanely. Most suitable for restraining rabbits for long hours during pyrogen testing. Restrainer body is made of SS material and neck part made of teakwood material along with locking device and adjustable length arrangements.

• Holder size: 14” x 6” x 7” (LxBxH)

We offer a wide range of organ bath systems that are widely used in pharmacology departments. Our range of isolated tissue systems are mainly used to record and analyze data from isolated tissue experiments. We are offering following types of organ bath systems:

• Single unit organ bath systems: Analog, Digital Model
• Double unit organ bath systems:: Analog, Digital Model
• Four unit organ bath systems : Analog, Digital Model
• Eight unit organ bath systems: Analog, Digital Model

Analog model comprises of analog temperature control while digital models provide digital temperature control. Each organ bath system comprises of:

• Organ bath tube
• Reservoir coils
• Tissue holders
• Water circulation pump - for maintaining Uniform Temperature
• Gas diffusers (Aerator Controllers)
• Temperature controllers: Analogue or Digital (as per model)
• Frontal writing lever
• Couplers set

Features & Benefits:

• Filling and emptying of tissue chambers can be performed simultaneoulsly simply by rotating knobs
• Internal heater produces excellent heat diffusion
• Immersed chambers & reservoir coils provides stable temperature maintenance
• Quick to set up & easy to use
• In built water circulation pump for maintaining uniform temperature
• In built gas diffuser to attach aerator to organ bath tube
• Directly & aeration can be controlled through knobs provided
• No need of glass aeration tubes
• Compact, robust design using no external glasswares
• Use of minimum metallic parts to minimise the corrosion

We are offering our spectrum of animal cage racks / trolleys that are catered in domestic as well as in international market all across the world. Also, these are provided with customization provision in terms of size and dimension. Further, these are fabricated from quality raw material and are available at competitive prices.

Rack/Trolleys for Animal Cage (Hanging Type For Mice, Rat & Hamsters):

Our animal cage racks or trolleys are fabricated from 1” square hollow pipe & angle of S.S 304 quality material. The animal racks or trolleys are mounted on four heavy duty 4” dia castors for easy handling and quiet transportation. Our racks have the following features:

• Available to hold 24 animal cages of size: 29 x 22 x 14 cms. (LxBxH). Rack size: 39” x 12” x 60” (LxBxH).
• Available to hold 24 animal cage of size: 41 x 28 x 15 cms. (LxBxH). Rack size: 50” x 18’ x 60” (LxBxH).
• Available to hold 20 animal cages 43 x 27 x 15 cms./ 43 x 27 x 22 cms. (LxBxH). Rack size: 62” x 20” x 65” (LxBxH).

Diffusion cell apparatus is exclusively designed to test creams, lotions, ointments, and patches. The transdermal diffusion cell apparatus is remarkably simple to operate, and the system is supplied with:

• Six/eight stage magnetic stirrer with digital RPM indicator
  
• Water heater and Water Circulation System with Digital Temperature Controller and Water Level Indicator
  
• Clamps to hold the Diffusion Cells
  
• Diffusion Cells
  
• Magnetic Beads
  

Features:

• Digital RPM indicator and single RPM controller common for all stirrers.
  
• Digital temperature controller.
  
• Water circulation system with water level sensors so as to avoid damage to the heater.
  
• Magnetic stirrer top covered with Teflon sheet to avoid corrosion
  
• Sturdy, heavy duty magnetic stirrers- allowing continuous, nonstop operations.
  

Pole climbing apparatus is the new improved model built in solid state buzzer and stimulator to provide electrical shocks of 16 - 200 V DC in pulsating rates 0.1 mA at a frequency of 5 Hz for duration controlled digitally or by built in digital selectable second timer. Output available for recording on Kymograph or polygraph complete to work on 230 V AC.

Features:

• Digital Voltmeter: 16 - 200 V DC.
• Digital Timer: 0.1 - 999 sec.
• Digital Delay Timer: 0.1 - 999 sec (cyclic).
• Complete Chamber and Tray made of thick imported Acrylic Sheets.
• Climbing Pole of Backelite.
• Switch for selecting light or sound mode.

We are offering our spectrum of tablet hardness testers that is demanded in domestic and international market all across the world. Also, these are available at competitive prices within the stipulated time frame.

Precision Dial Type Tablet Hardness Tester:

It comprise precision engineered dial gauge, aluminum body and finely machined components. Dial comprises main pointer and follow pointer. Tablet is to be positioned in between with two anvils. Force applied is recorded on dial gauge. Instrument can be validated by dead weight upto 5 kgs.

• Model: HTPD 01
• Capacity: 0-200 Neutrons
• Accuracy: +/- 5 Neutrons

Hardness Tester - Pfizer Type:

Complete with dial gauge, richly chrome plated machine parts. Useful to take quick readings on dial. All contact parts made of Stainless steel. The hardness reading is with accuracy +/- 0.5 Kgs. The scale is adjustable for 0 setting as per the size of the tablet.

• Capacity: 0 - 20 Kg
• Model: HT - 01
• Provided with calibration certificate

Hardness Tester - Monsanto Type:

A fiarly and handy instrument for taking quick reading of the hardness of tablets. It is made of brass turned parts, heavily chrome plated. The scale is 0 to 20 kgs. The index mark & division is in 1 kg reading. Scale is adjustable for 0 setting as per the size of the tablet.

• Capacity: 0 - 20 kg
• Model: HT - 02
• Provieded with calibration certificate