Sectional Overhead Doors are normally used for shutters in loading-unloading areas, and are installed wherever frequent transit occurs as the opening-closing time is smaller. These sectional doors have Door panels constructed from 0.7 mm or 0.5 mm galvanized Steel sheets bonded together with CFC free polyurethane foam with integral thermal breaks. All our door panels are fitted with fully punched galvanized end caps.

 Our panels provide a 'U' value of 0.45 w/m2K. Normally the combined effect of the panel insulation properties together with the effect of thermal bridges at the panel to panel joints results in an overall 'U' value of w/m2 K which exceeds building regulation requirements.

Our rapid doors provide effective security and cut down on time as well since they operate at such high speed. The main characteristics of these doors are:  

• High speed operation 1 to 2.5 meters per second
  
• Tough, durable curtain polyester PVC coated
  
• Fiberglass curtain stiffeners rebound on impact
  
• Individual curtain segments easily replaced
  
• Large view ports provides excellent visibility
  
• Sophisticated microprocessor controlled functions
  
• Displays show the doors operation and status
  
• Low friction guides ensures smooth running
  
• Industrial rated drive, sensors and components
  
• Designed for continuous high speed operation
  
• Exclusive active and passive safety features
  
• Power supply 415 V three phase or 240 V single phase
  
• Constant or variable speeds drive and door operation
  
• Detectors induction loops
  
• Remote control,
  
• Motion detectors
  
• Photocells
  
• Push button and pull switch
  
• Securities safety edge
  
• Floor marking and lights
  
• Auto open or continuing operation when the power fails
  
• Dual open heights and other function specific controls

We offer high quality shutters which provide excellent security, improve insulation against both heat and cold, and protect from weather and fading.

Features of our rolling shutters include:

• Simple to install
  
• Easy to operate
  
• Need little maintenance
  
• Economical to repair

We supply Sliding Gates which can be easily installed on new as well as existing structures. The sliding doors we provide are light, sturdy and easy to install. We have the capability to design a variety of gates which can support most architectural plans.

The Sliding Gates manufactured by us are highly durable and provide complete security. They are designed to withstand rough handling and extreme weather conditions.

The barriers manufactured by us provide full safety and are of superior quality. Our exclusive range of safety barriers is impervious to varied temperature changes. Upon being filled with sand and water they can function as are barricades and act as protective walls to provide security and safety under all conditions.

We manufacture a variety of motors which are used for various applications. Our motor systems have certain distinguishing features such as:  

• Compact Designs
  
• Dust Proof/Non Dust Proof
  
• Easy Operation
  
• In Built Magnetic Electro Magnetic Brakes
  
• Thermal Protection
  
• Easy Installation
  
• Energy Efficient
  
• Manual Override Systems
  
• Torque Range from 160 N.m to 2500 N.m
  
• Single Phase Motors upto 500 N.m
  
• Power 250 watts to 1000 watts
  

Accessories:
Push Switch/Key Type Push Button Switch Remote Controls.

The side motor manufactured by us has a Compact construction, large torque, and runs without noise. It is patented in structure with smooth brake and no sliding down. The motor does not burn down for it operates with protection of thermal effect. The transmission is composed of special alloys and is very durable. The design of the motor protects the reduction gears from dust and damage making it ideal for all types of installations. The added features of the motor are:  

• Built in magnetic braking system
  
• Light and easy manual operation with hand chain
  
• Direct Drive motors reducing requirement to service as there are no other mechanical parts involved.
  
• Available in three phase 440 volts and single phase 220 volts.

The tubular motor manufactured by us is available in a Compact design but it provides a large torque and running without noise.

It has a patented structure with smooth brake which prevent sliding down. The motor is protected by the thermal effect against burning down. The transmission comprises of planetary gears in three stages thus giving a huge torque. The design structure protects reduction gears from dust and damage making it ideal for all types of installations as the motor is inside the pipe shaft itself. Other features of the motor are:  

• Direct Drive motors reducing requirement to service as there are no other mechanical parts involved.
  
• Built in magnetic braking system
  
• Light and easy manual operation with hand chain
  
• Available in single phase 220 volts

The central motors manufactured by us are ideal for roller shutters counter balanced with springs. the main features of this motor are:  

• Smooth and easy installation and operation
  
• Light and easy manual operations with hand pulls and push
  
• Magnetic brakes can be added if required
  
• Available torque from 100 n.m. To 225 n.m
  
• Available in single phase 220 volts
  

Accessories:
Key Switch/Remote Control