We have been making use of latest technology to manufacture a dimensionally accurate range of Orthopedic Instruments. These are customized as per the specifications of our clients and are available in following types:

• Instruments for hip Prosthesis
  
• Instruments for interlocking nail
  
• Intramedullary reaming set
  
• Instruments for conventional intramedullary nail
  
• Instruments for bone plates
  
• Instruments For Bone Screws
  
• Instruments For Pin And Wires
  
• nstruments For Staples
  
• Instrument Set For Spinal Screws/ Hooks
  
• Conventional Spinal Instruments
  
• Ring Fixator (Illizarov Type
  

Our range of Schanz Screws is manufactured wile adopting latest technological developments. These are customized as per the specifications of our clients and are available in following types.

• Conic schanz screw (trocar tip)
  
• Non conic schanz screw (trocar tip)
  
• Non conic schanz screw cancellous thread (trocar tip)
  
• Conic schanz screws (regular tip)
  
• Non conic schanz screw (regular tip)
  

We are serving the orthopedic requirements of our clients with a wide range of bone screws. These are dimensionally accurate and are fabricated using high grade raw material.

Types:

1. Cortical Screws

• Cortical Screws for 4.5mm
• Cortical Screws for 2.7mm
• Cortical Screws for 1.5mm
• Cortical Screws for 3.5mm
• Cortical Screws for 2.0mm

2. Cancellous Screws

• Cancellous Screws for 6.5mm (16mm Thread)
• Cancellous Screws for 6.5mm (Full Thread)
• Cancellous Screws for 4.0mm (Partial Thread)
• Cancellous Screws for 3.5mm (Partial Thread)
• Cancellous Screws for 6.5mm (32mm Thread)
• Cancellous Screws for 4.0mm (Full Thread)
• Cancellous Screws for 3.5mm (Full Thread)

3. Cancellous Cannulated Screws

• Cancellous Cannulated Screws for 7.0mm (16mm Thread)
• Cancellous Cannulated Screws for 7.0mm (Full Thread)
• Cancellous Cannulated Screws for 4.0mm (Full Thread)
• Cancellous Cannulated Screws for 3.5mm (Full Thread)
• Cancellous Cannulated Screws for 7.0mm (32mm Thread)
• Cancellous Cannulated Screws for 4.0mm (Partial Thread)
• Cancellous Cannulated Screws for 3.5mm (Partial Thread)

4. Malleolar Screws

• Malleolar Screws for 4.5mm
• Malleolar Screws for 3.5mm

5. Shaft Screws

• Shaft Screws for 4.5mm
• Shaft Screws for 3.5mm

6. Ashnis Screws

We are making use of latest technology to fabricate a wide range of Spinal Screws which is in high demands in medical institutions, hospitals and nursing homes. These are customized as per the specifications of our clients and are in compliance with various industrial standards.

Types:

1. Spinal Screw & Hooks

• Monoaxial Screw 4.5mm
• Monoaxial Screw 5.5mm
• Monoaxial Screw 6.5mm
• Polyaxial Screw 4.5mm
• Polyaxial Screw 5.5mm
• Polyaxial Screw 6.5mm

2. Spinal Hooks

• Thoracic Hooks
• Lamina Hook
• Angled Lamina Hook
• Pedicle Spinal Rod Dia 5.0mm
• Rod 3mm for D Connector
• Locking Nut (Outy)
• Grub Screw (Inny)

4. D Connector Clamp

• Anterior Washer (Staple)

 

We are well established manufacturers and suppliers of a wide range of HIP Prosthesis which are customized as per the specifications of our clients. These are in compliance with various industrial standards and are offered at industry leading prices as well.

These are available in three different models namely as:

• Austin Moore Hip Prosthesis
  
• Thompson Hip Prosthesis
  
• Bi-Polar Hip Prosthesis

Specifications of the models

Austin Moore Hip Prosthesis


Austin Moore Hip Prosthesis Standard Stem

• Dia. 37mm to 55mm (with 1mm Difference)

Austin Moore Hip Prosthesis Broad Stem

• Dia. 37mm to 55mm (with 1mm Difference)
  

Austin Moore Hip Prosthesis Narrow Stem

• Dia. 37mm to 55mm (with 1mm Difference)
  

Thompson Hip Prosthesis


Thompson Hip Prosthesis Standard Stem

• Dia. 37mm to 55mm (with 1mm Difference)
  

Thompson Hip Prosthesis Narrow Stem

• Dia. 37mm to 55mm (with 1mm Difference)
  

Bi-Polar Hip Prosthesis


Bi-Polar Hip Prosthesis Fenestrated Stem (Sterile)

• Dia. 37mm to 56mm (with 1mm Difference)
  

Bi-Polar Hip Prosthesis Non Fenestrated Stem (Sterile)

• Dia. 37mm to 56mm (with 1mm Difference)
  

Instruments for Hip Prosthesis

• Hudson Brace with 5 Burrs
  
• Burr for Hudson Brace 10mm Drill
  
• Burr for Hudson Brace 11mm Conical
  
• Burr for Hudson Brace 13mm Round
  
• Burr for Hudson Brace 14mm Conical
  
• Burr for Hudson Brace 16mm Round
  
• Extension Piece for Brace
  
• Bone Skid Murphy Lane
  
• Extractor for Austin Moore Hip Prosthesis with 2 hooks
  
• Spare Hook for Austin Moore Extractor
  
• Gauge for Prosthesis Set of Ten
  
• Gauge for Prosthesis Set of Nineteen
  
• Hollow Chisel Austin Moore Type
  
• Hip Gouge Martin with Fibre Handle
  
• Impactor for Femoral Head S.S. with Nylon Faced
  
• Impactor for Femoral Head Aluminum with Nylon Faced
  
• Spare Nylon Face for Impactor
  
• Impactor for Femoral Head Complete Tufnol
  
• Judet Auger Extractor S.S.
  
• Rasp Moore Type with Tommy Bar (For Standard Stem & Bi-Polar Prosthesis)
  
• Rasp Moore Type with Tommy Bar (For Narrow Stem)
  
• Rasp Moore Type with Tommy Bar (For Broad Stem)
  
• Rasp Thompson Type with Tommy Bar (For Standard Stem)
  
• Rasp Thompson Type with Tommy Bar (For Narrow Stem)
  
• Bone File with Fibre Handle
  
• Inserter For Bi-Polar Prosthesis
  
• Charnley Incision Retractor
  
• SS General Box For Hip Prosthesis Box (With SS 2 Plain Trays):

We are offering a wide range of pins and wires which are customized as per the specifications of our clients. These are dimensionally accurate, durable and rigid and are in compliance with various industrial standards.

• Kirschner Wires (Single Ended)
• Kirschner Wires (Double Ended)
• Kirschner Wires (With Thread)
• Kirschner Wires (Fully Threaded)
• Steinman Pins
• Steinman Pins With Middle Thread (Denham Pins)
• Moore Pins
• Knowles Pins
• Suture Wires
• Cerclage Wires
• Staples

We are serving the wide requirements of the medical industry with a wide range of Ring Fixator (Illizarov Type) Implants. These are available in various models and can be customized as per the specifications of our clients.

Ring Fixators (Illizarov Type Instruments)
 

• Half Rings 80 mm
  
• Half Rings 100 mm
  
• Half Rings 110 mm
• Half Rings 120 mm
• Half Rings 130 mm
• Half Rings 140 mm
• Half Rings 150 mm
• Half Rings 160 mm
• Half Rings 180 mm
• Half Rings 200 mm
• Half Rings 220 mm
• Half Rings 240 mm
• Full Rings 100 mm
• Full Rings 120 mm
• Full Rings 140 mm
• Full Rings 160 mm
• Full Rings 180 mm
• Full Rings 200 mm
• 5/8” Ring 80 mm
• 5/8” Ring 100 mm
• 5/8” Ring 120 mm
• 5/8” Ring 140 mm
• 5/8” Ring 160 mm
• 5/8” Ring 180 mm
• 5/8” Ring 200 mm
• 5/8” Ring 220 mm
• Threaded Rods 40 mm
• Threaded Rods 60 mm
• Threaded Rods 80 mm
• Threaded Rods 100 mm
• Threaded Rods 120 mm
• Threaded Rods 150 mm
• Threaded Rods 180 mm
• Threaded Rods 200 mm
• Threaded Rods 300 mm
• Threaded Rods 350 mm
• Threaded Rods 400 mm
• Threaded Rods Slotted 40 mm
• Threaded Rods Slotted 60 mm
• Threaded Rods Slotted 80 mm
• Threaded Rods Slotted 100 mm
• Threaded Rods Slotted 120 mm
• Threaded Rods Slotted 150 mm
• Threaded Rods Slotted 180 mm
• Threaded Rods Slotted 200 mm
• Threaded Rods Slotted 250 mm
• Threaded Rods Slotted 300 mm
• Threaded Rods Slotted 350 mm
• Threaded Rods Slotted 400 mm
• Threaded Rods With Hole 40 mm
• Threaded Rods With Hole 60 mm

We are supplying a wide range of interlocking nails which are in compliance with various industrial standards. These are customized as per the specifications of our clients and are known for long service life.

Interlocking Nail-Types

1. Proximal Femoral Nail

• Pfn Nail Short
• Pfn Nail Long
• Proximal Lag Screw Upper
• Proximal Lag Screw Lower
• Cannulated End Cap For Proximal Lag Screw Lower
• End Cap For Pfn Nail
• Cannulated End Cap For Pfn Nail
• Proximal Locking Upper
• Proximal Locking Lower
• Distal Locking

2. Gamma Nail

• Proximal Lag Screw Cannulated
• Distal Bolt
• Set Screw End Cap For Gamma Nail

3. Supracondylar Nail

• Supraacondylar Straight Nail
• Supraacondylar Straight Nail With 5 Holes - Reamed
• Supraacondylar Straight Nail With Multiple Holes
• Supraacondylar Angled Nail
• Supraacondylar Angled Nail With Multiple Holes
• End Cap For Supraacondylar Nail
• End Cap For Supraacondylar Nail Cannulated

4. Reconstruction Nail

• Reconstruction Nail (Right)
• Reconstruction Nail (Left)

5. Interlocking Nail Femur

6. Interlocking Nail Tibia

7. Interlocking Instruments Set Universal For All Inter Locking Nails - Tibia / Femur/ Recon Nail

8. Supplementary Instruments: Distal and Proximal Locking Without 'C' Arm Facility For Femur / Tibia / Recon Nail

9. Cannulated System For Reconstruction Proximal Lag Screw

10. Supplementary Instruments: Distal Locking With 'C' Arm Facility For Femur / Tibia / Recon Nail

11. End Cap for Recon, Femur & Tibia Nail

12. Cannulated End Cap for Recon, Femur & Tibia Nail

We have been manufacturing a wide range of Tubular External Fixator for Femur & Tibia which is customized as per the specifications of our clients. These are designed and developed as per various medical standards and are available in following types:
 

• Single Pin Adjustable Clamp With Open Vice
  
• Single Pin Adjustable Clamp With Fixed Vice 4.5/5.0 X 11.0mm (6mm Threaded Part)
  
• Single Pin Adjustable Clamp With Fixed Vice 4.0/4.5 X 11.0mm (6mm Threaded Part)
• Single Pin Adjustable Clamp With Fixed Vice 4.5/5.0 X 11.0mm (Special Quality) (7mm Threaded Part)
• Single Pin Adjustable Clamp With Fixed Vice 4.0/4.5 X 11.0mm (Special Quality) (7mm Threaded Part)
• Clip On Self Holding Clamp 4.0/5.0 X 11.0mm
• Double pin Adjustable Clamp
• Open Clamp
• Connecting Clamp
• Transverse Clamp
• Tube to Tube Clamp
• Twin Adjustable Clamp straight/Curved

We have available with us a wide range of Conventional Intramedullary Nails which is manufactured using high grade raw material. These are customized as per the specifications of our clients and are in compliance with various industrial standards.

Kuntscher Cloverleaf Nail Straight For Femur

• Dia: 6mm Length: 140mm to 400mm (Diff. 20mm)
  
• Dia: 7mm Length: 140mm to 400mm (Diff. 20mm)
  
• Dia: 8mm Length: 200mm to 520mm (Diff. 20mm)
  
• Dia: 9mm Length: 200mm to 520mm (Diff. 20mm)
  
• Dia: 10mm Length: 200mm to 520mm (Diff. 20mm)
  
• Dia: 11mm Length: 200mm to 520mm (Diff. 20mm)
  
• Dia: 12mm Length: 200mm to 520mm (Diff. 20mm)
  
• Dia: 13mm Length: 200mm to 520mm (Diff. 20mm)
  
• Dia: 14mm Length: 200mm to 520mm (Diff. 20mm)
  
• Dia: 15mm Length: 200mm to 520mm (Diff. 20mm)
  

Kuntscher Cloverleaf Nail Proximal Bend For Tibia

• Dia: 6mm Length: 140mm to 400mm (Diff. 20 mm)
  
• Dia: 7mm Length: 140mm to 400mm (Diff. 20 mm)
  
• Dia: 8mm Length: 200mm to 520mm (Diff. 20 mm)
  
• Dia: 9mm Length: 200mm to 520mm (Diff. 20 mm)
  
• Dia: 10mm Length: 200mm to 520 mm (Diff. 20 mm)
  
• Dia: 11mm Length: 200mm to 520mm (Diff. 20 mm)
  
• Dia: 12mm Length: 200mm to 520mm (Diff. 20 mm)
  
• Dia: 13mm Length: 200mm to 520mm (Diff. 20 mm)
  
• Dia: 14mm Length: 200mm to 520mm (Diff. 20 mm)
  
• Dia: 15mm Length: 200mm to 520mm (Diff. 20 mm)
  

Kuntscher 'V' Nails

• Dia: 3mm Length: 160mm to 360 mm (Diff. 10 mm)
  
• Dia: 4mm Length: 200mm to 400mm (Diff. 10 mm)
  
• Dia: 5mm Length: 200mm to 400mm (Diff. 10 mm)
  
• Dia: 6mm Length: 200mm to 400mm (Diff. 10 mm)
  
• Dia: 7mm Length: 200mm to 400mm (Diff. 10 mm)
  
• Dia: 8mm Length: 200mm to 400mm (Diff. 10 mm)
  
• Dia: 9mm Length: 200mm to 400mm (Diff. 10 mm)
  
• Dia: 10mm Length: 200mm to 400mm (Diff. 10 mm)
  
• Dia: 11mm Length: 200mm to 400mm (Diff. 10 mm)
  

Rush Nails / Hook Intramedullary Nail

• Dia: 2.0mm Length: 160mm to 300mm (Diff. 10mm) Radius & Ulna
  
• Dia: 2.5mm Length: 160mm to 300mm (Diff. 10mm) Radius & Ulna
  
• Dia: 3.0mm Length: 160mm to 300mm (Diff. 10mm) Radius & Ulna
  
• Dia: 3.5mm Length: 200mm to 360mm (Diff. 10mm) Humerus
  
• Dia: 4.0mm Length: 200mm to 360mm (Diff. 10mm) Humerus
  
• Dia: 5.0mm Length: 200mm to 360mm (Diff. 10mm) Tibia
  
• Dia: 6.0mm Length: 200mm to 360mm (Diff. 10mm) Femur
  

Square Nails For Ulna

• Dia: 2.0mm Length: 160mm to 300mm (Diff. 10mm)
  
• Dia: 2.5mm Length: 160mm to 300mm (Diff. 10mm)
  
• Dia: 3.0mm Length: 160mm to 300mm (Diff. 10mm)
  
• Dia: 3.5mm Length: 160mm to 300mm (Diff. 10mm)
  

Square Nails For Radius

• Dia: 2.0mm Length: 160mm to 300mm (Diff. 10mm)
• Dia: 2.5mm Length: 160mm to 300mm (Diff. 10mm)
• Dia: 3.0mm Length: 160mm to 300mm (Diff. 10mm)
• Dia: 3.5mm Length: 160mm to 300mm (Diff. 10mm)