|
Machined Components
| Ring Joint Gasket/Ring Gasket |  | Ring Joint Gaskets/Ring Gaskets are manufactured in various types, comprising of R type (Oval & Octagonal), RX type, BX type, in Low Carbon Steel, Soft Iron, Stainless Steel(SS304L, SS316L, SS347, etc.), F5 ( 4-6%Cr.1/2Mo), Nickel, Inconel, Incoloy, Hastelloy, Monel, etc. These Ring Joint Gaskets are developed in accordance to API6A & ASME B 16.20 specifications. We have API Monogram License (American Petroleum Institute), License No.6A-0326 and we can use this monogram on our entire range of Ring Joint Gaskets. | | Send Query |
| Metal Gaskets | | We also are serving our clients
with a high quality of metal gaskets which consist of a sheet metal jacketed
and filter of asbestos, CAF, PTFE, Grafoil which improves its resistance
peculiarities to temperature and loads. By its structure it is easily
compressible with tightening loads lower than those required for metallic
gaskets. Metal gaskets are made as single jacketed and double jacketed or corrugated
jacketed as per your design requirements.
These metal gaskets have the following features:
- Odorless
- Non-sarcastic
- Carry an electrical insulation property
| | Send Query |
| Camprofile Gasket/Serrated Gasket/Profile Gasket | 
| Camprofile / Serrated / Profile Gaskets consist of a Metallic Core with concentric grooves on either side of the sealing materials. These gaskets are highly suited for varying temperatures & pressures. The other additional benefits of these gaskets are that it will not damage the flange surface and can be easily removed. The core material is reusable after cleaning & re-layering and therefore very cost effective. These Gaskets are used for ASME/ANSI B16.5 Flanges, ASME B16.47 Series A (MSS SP-44) Flanges & ASME B16.47 Series B (API 605) Flanges. Core materials are Stainless Steel, Soft Iron, Low Carbon Steel, Nickel, Inconel, Monel, Aluminium, Copper, Titanium and Filler materials are Asbestos, Graphite, Non Asbestos Material, PTFE. | | Send Query |
| Spiral Wound Gaskets |
| Spiral Wound Gaskets are available in different materials in accordance to ASME B 16.20 for use in all industry flanges, including ASME/ANSI B16.5, ASME B16.47, Series A & B. Winding Materials include Stainless Steel, Inconel, Monel, Nickel, Titanium, etc. Filler materials used are Non asbestos material, Graphite, PTFE. Inner & Outer Rings are also used as per customer specifications. | | Send Query |
| Rolled Ring/Forged Ring/Seamless Ring |
| Rolled Ring/Forged Ring/Seamless Ring are manufactured from 50mm diameter to 1500mm diameter and upto 200 kgs weight in Alloy Steel, Brass, Bronze, Carbon Steel, Copper & Copper alloys, Stainless Steel, Inconel, Monel, Nickel, Hastelloy and other exotic alloys. We manufacture these rings in forged condition, pre-machined condition, or finished condition in accordance with customer specifications and drawings. | | Send Query |
| Seat Retainer Rings |
| Seat Retainer Ring/Retainer Ring and other types of Metal Rings are manufactured in various materials Alloy Steel, Carbon Steel & Stainless Steel, Inconel, Monel, Nickel, Hastelloy, and other exotic alloys to fulfill the requirements of Valve industry.
- Seat Retainer Ring/Retainer Ring
- Seat/Back Seat/Seat Ring
- Insert Ring/Spacer Ring
- Seal Ring/Bonnet Seal Ring/Bonnet Ring
| | Send Query |
| Bush/Yoke/Gland |
| Bush/Yoke/Gland are manufactured in various materials like Alloy Steel, Brass, Bronze, Carbon Steel, Copper & Copper alloys, Stainless Steel, Inconel, Monel, Nickel, Hastelloy and other exotic alloys. | | Send Query |
| CNC Machined Components |
| Our manufacturing unit is well equipped with CNC machining facility upto 1000mm diameter that enables us to manufacture and supply CNC & VMC machined components in compliance with customer drawings and specifications. These are made up with various quality materials such as Alloy Steel, Brass, Bronze, and Carbon Steel, Copper & Copper alloys, Stainless Steel, Inconel, Monel, Nickel, Hastelloy and other exotic alloys. | | Send Query |
| Valve Components | | Utilizing CNC machines we have to manufacture the valve
components, we maintain high level of accuracy in manufacturing and exacting
the specifications. Our range of valve components is precisely manufactured as
per the requirements of our clients. We manufacture a range of valve
components. These are made of superior quality metal alloys and are available
in compact designs. The valves are offered in different sizes and design to meet
the varied requirements of the industry.
With our strong engineering capabilities, we can assist
the customers to improve the products, cost down and increase competitiveness
and can be customized as per the requirement of the clients.
| | Send Query |
| PTAW/GTAW |
| We undertake hard facing of Cobalt/Nickel alloys done on Valve Seats & Discs using Plasma Tungsten Arc Welding Process (PTAW). Similarly for hard facing/welding is done on Seat Rings, using Gas Tungsten Arc Welding (GTAW). | | Send Query |
|
|
© Packings And Jointings Gaskets Pvt. Ltd.. All Rights Reserved (Terms of Use)