Migatronic offers custom-built and special solutions for all TIG Ergo models, such as adjustment of lengths of cables and hoses, special configuration of wearing parts, change from standard to special torch body versions and adjustment of connections for other makes of welding machines
TIG 201 is supplied with a small handle and a very flexible cable. For high performance welding, use the TIG 201 HD version. TIG 201 HD is supplied with a large handle and a stronger cable for full performance and high duty cycle. TIG 201 is typically used for production and on-site repairs in stainless materials and aluminium. TIG 201 can be equipped with all wearing parts displayed to the left, and the control unit is easily replaced.
Being a total supplier of weldingequipment, migatronic alsodevelops and produces weldinghoses. Quality demands increaseas welding technology improvesthe possibility of communication between torch handle and welding machine and as the individual welders increase their expectations for operational comfort,ergonomics and user-friendliness. The latest result of this development is a complete range for tig welding: the migatronic tig ergo welding hoses.
The new range of tig welding hoses consists of four families:
The aircooled tig 101, tig 201 and tig 301 and the watercooled tig 301 and 401. From the small, lightweight tig 101 to the tig 401 which is designed for high performance tig welding with high duty cycle and up to 400a dc welding current. the 50 variants differ in current intensity, flexible torch body, length of cable (4 or 8 m). 6 or 7 pole plug and choice of built-in control unit in the torch handle. Handle with softgrip in the new design. Ergonomics, flexibility and reliability have been brought into focus. The torch handle is available in two sizes, both of which have ball and socket joint relief and softgrip on the sides of the handle for safe, pleasant grip. The first 80 cm of the cable from the handle has a leather cover which. Combined with the ball and socket joint relief, gives optimum flexibility, even in difficult to access places. At the same time the leather cover increases the wearability of the welding hose. The migatronic tig ergo range has been developed for two optional control units: a keypad unit or a unit with both keypad and control knob that allows communication mof current control directly from the torch handle to the welding machine. You make the choice upon purchase of the welding hose but the unit is easily replaced later.
Migatronic abbreviations tig 201 = model hd = heavy duty r = control for migatronic tig machines (dialog) flex = flexible torch body 8 m = length rh = horisontal regulation rv = vertical regulation
TIG 401 is the strongest model in our range of TIG welding hoses. TIG 401 is watercooled and constructed for heavy-duty welding.
TIG 401 is designed for high performance welding with high duty cycle and up to 400A DC welding current.
TIG 401 is typically used for production and on-site repairs in stainless steel and aluminium in thick wall-thicknesses.
TIG 401 can be equipped with all wearing parts displayed to the left, and the control unit is easily replaced.
We offer two solutions:
The TIG torch body can be equipped with electrode holder and electrode clamp in dimensions that fit the desired tungsten electrode diameter. In addition, there are various designs of the ceramic gas nozzle for optimization of gas shielding for a given welding operation. The function of the gas nozzle is to guide the shielding gas towards the weld zone and displace atmospheric air. The size of the gas nozzle (inside diameter) is printed on the side, e.g. #4 = 4 x 1.6 mm = 6.4 mm.
The TIG torch body can be equipped with special gas lenses for better control of the shielding gas. Passage through a special wire mesh will keep the gas jet more stable over a longer distance. This allows a longer electrode stickout which gives a better view of the weld pool. Use of gas lens may reduce the gas consumption compared to the gas consumption when standard equipment is used. For wearing parts for the individual TIG welding hoses, please see previous pages.
TIG FLEX torch body The Migatronic TIG FLEX torch bodies are flexible and shapeable for difficult welding operations. If several shapings are required, we recommend a turnable TIG torch body (please see custom-built and special solutions on pages 13 and 14). Cautiousness is required for shaping the torch body. The torch body must be cooled off and max. bending angle is 45°. Use your thumbs for support of the torch body as shown below.
tig 101 is a small, lightweight aircooled tig welding hose for use in hard-to-reach locations and where welding current does not exceed approx. 100 a dc. tig 101 is typically used for production and on-site repairs in stainless materials. tig 101 can be equipped with all wearing parts displayed to the right, and the control unit is easily replaced.
Lightweight set of sleeves with elastic and buttons for shoulder fixing. Protects against grinding particles and weld spatter. Our precision engineered sleeves are ceramic coated for durability. Our range of hardened sleeves are corrosion resistance and resistant to oils and friction.
We offer our customers with a qualitative range of split leather welding gloves that are designed having five fingers and re fabricated using premium quality split leather. Having a length of 28 cm, these split welding gloves are available in bulk quantities to suit the varying requirements of our clients.
Welding gloves in a soft quality with a 14 cm cuff in split leather sewn with Kevlar. Perfect for quality welding. Size 10.
Luxury MIG/MAG welding gloves. Very comfortable and soft heat-resistant leather gloves with internal Kevlar stitching.
Strong welding gloves made of cowhide. Upper side of split leather and index finger of hide. Size 10.
A tip adaptor made of cucrzr will increase the performance of the torch. a standard tip adaptor is made of ms (brass) which is characterized by its strength, but the thermal conductivity is not optimal. Cucrzr is characterized by the strength and ductility of ms and the thermal conductivity of e-cu. That is why it is possible to achieve a better performance for a given torch by using a cucrzr contact tip.
Storage cabinet for electrodes and powders ES 260 Storage cabinet for electrodes ES 210 Electrode oven for electrodes and powders with control box ETS 260
Outdoor and indoor portable storage cabinet for electrodes and powders and drying at low or medium temperatures. An infinitely adjustable (up to 300°C) thermostat ensures a constant temperature inside the cabinet. If storage of electrodes in original packing is required, the cabinet can be fitted with a safety thermostat keeping the temperature below 70°C. The cabinet can be transported either by crane or fork-lift truck. Storage cabinet RTS 270 for flux-cored wires
We offer our clients with a quality assured gamut of cable plugs that are manufactured using industry accepted standards . Making electrode holder insulating rubber jacket. 2 settings with welding angle 45° or 90°.
We offer to our clients a vivid range of Welding Curtains that are fabricated from finest quality raw material. These curtains provide effective and superior protection during various welding operations. We provide a wide range of welding curtains which is produced from finest quality raw material.
Separate curtains in standard sizes with ring holes at 22 cm spacing at the top and with plastic snap fasteners welded on the sides. Supplied with 7 steel rings.
We offer our clients a wide range of fancy leather goods, which are available in various specifications. Our range includes leather key rings, leather organizer and planner, leather files and folders, leather passport holder, leather portfolio bags, ladies leather purses, gents leather wallets and men's leather wallets.
Welding jacket in split leather, sewn with Kevlar. Windproof and waterproof.
Lightweight, protective welding jacket in fire-resistant fabric. Designed specifically for the welding industry.
One can avail from us a wide range of safety products that are inline with industrial requirements. These safety products are available as per the desired requirements of the clients and find numerous applications. Neck protection designed specifically for Migatronci welding helmet. Protects against weld spatter and radiation.
Backed by a rich industry experience and knowledge, we are engaged in manufacturing and supplying supreme quality Gas Regulator. This product is manufactured using high grade material such as stainless steel and brass, which is used to store gases such as oxygen, acetylene, nitrogen, argon, hydrogen, helium, compressed air, medical oxygen etc
Gas preheater Non-return valve Non-return valve Oxygen 3/8 H Double tap Ar/Mix 3/8 H
The increased use of manifold cylinders and piped gasses have created a need for specialised regulators. One benefit of a piped gas supply is relatively low pressure of gas within the building. This demands a regulator with large orifics and streamline gas passage to pass large volumes at low inlet pressure.
Argonex 30 l. tigex i ar/mix 30 l. argonex 30 l. acetylene oxygen
Unit supplied complete with belt with valve, fresh-air hose, welding helmet with built-in air-duct and face seal.
We manufacture Compressed Air Aftercoolers. It is a heat exchanger designed & manufactured to reduce / cool the compressed air temperature to desired level, so the condensation takes place & vaporized moisture & oil in air gets converted in liquid droplets which further separated by moisture separator.
The design of MIG-A Twist® fits naturally in with Migatronic’s characteristic design of welding machines and control panels. Welding quality and user-friendliness will always be the focus parameters: the better welding tool, the better workmanship. MIG-A Twist® features …
• Patented turning system • No O-rings/seal faces in the turning system • Ergonomic design • Handle with softgrip • Trigger with changeover between short and long travel • Soft hoses and cable relief • Sequence modules (option) • Large range of accessories
Welding apron in split leatherwith riveted nylon strap and click buckle. We provide our clients with a unique gamut of welding aprons that are exclusively designed for industrial application. Fabricated using cow split leather, these aprons are light weight and are priced economically to suit the budgetary constraints of our clients.
With the support of our team of professionals, we are able to offer a wide range of Filter Regulator Combination in various specifications. Tested t every stage of development, our collection is free from any defect and damages. These products are offered within promised time frame at the optimum cost to suit the pocket of our clients.
We provide our clients a wide collection of Welding Grinding Goggles , which is available in distinct styles and designs and is available in market leading prices. These goggles are made using superior quality raw materials like glass and plastic and provide safety from harmful dust or liquid particles, fumes and radiations.
Welding/cutting goggles welding/cutting goggles with side protection and leather head strap.
Grinding goggles half-mask in clear soft plastic with air louvres.
Welding/grinding goggles combined welding/grinding goggles with round carborock glass. Fixed grinding goggles and flip-up welding glasses. glasses can be changed as required.
We are offering Welding Helmet which is made injection moulded high flexible polypropylene material. This is very sturdy and light weight along with adjustable ratchet head gear, standard vision 110 mm x 85mm available in black colour only.
Fibreglass welding helmet with clear glass observation strip.
Polypropylene welding helmet with clear glass observation strip.
Fibreglass welding helmet with flip-up frontpiece.
Foot switch ftf infinitely-variable adjustment of current adjustment range. adjustment of current and start/stop function. Remote control cable, 8-pole and 6-pole foot switch 7-pole aircooled remote control fpb pulse adjustment, also with pulsing in slope-up and slopedown function. Infinitelyvariable adjustment of pulse current and base current infinitely-variable setting of pulse time and pause time.
The welding hose is the welder’s auxiliary arm and quite decisive for the welding result. That is why Migatronic develops and designs its own comprehensive range of ergonomically correct welding hoses; The TIG Adjust,
for example, can be turned in any direction and TIG Flex is flexible and can be shaped to a welding angle of choice.
Examples of accessoriesfor Migatronic Pi:
• IGC® Intelligent Gas Control • Trolley with integrated cylinder console and torch holder • Frame for mounting in rack system • Autotransformer 230–500 V • Cooling unit • Foot control unit/pocket control unit • Water control unit • Welding hoses/cables in various lengths
Manufacturers and exporters of welding equipments machinery, welding system, boom welding system, linear welding system, tube welding system, plate welding system and arc welding systems. Also offer welding machines, job rotator, traverse carriage unit