Our offered ranges Filter Elements that are widely appreciated for its best features like better performance, sturdiness, superiority and dependability. We are engaged in offering a comprehensive range of these products in a wide range in various varieties of dimensions.
Ultipleat High Flow Filter
The Ultipleat High Flow filter is a large diameter, coreless, single open ended, pleated cartridge with an inside-to-outside flow pattern. The filter's unique crescent-shaped pleat geometry, combined with its large 152.4 mm (6 inch) diameter and proprietary range of available Pall filter media, allows you to use significantly fewer filters and smaller housings for high flow rate applications. Systems can handle up to 115,443 lpm (30,500 gpm).
Up to 50% smaller filter system possible
Up to 40 times fewer elements to change out
Higher flow rates per filter cartridge – up to 1900 lpm (500 gpm)
Available in 508 mm (20 inch), 1016 mm (40 inch), 1524 mm (60 inch) and 2032 mm (80 inch) lengths
Coreless, all plastic construction to minimize waste disposal
Absolute rated filter medium for reproducible performance
Inside-to-outside flow configuration – all debris stays within the filter
Profile® II RFN Series filters* are composed of an all nylon filter medium with glass filled polypropylene cores as standard. They are also available with glass filled nylon cores. The elements have an absolute rated downstream section, and a continuously profiled pore size upstream section, which increases service life many-fold.
The fibers in Profile II RFN filters are for practical purposes continuous. No binder resin is used —the fibers are “bonded” by intertwining during the manufacturing process. As a result , Profile II RFN filters show no media migration.
The materials of construction of the standard RFN Series filters permit application in a very wide range of liquids, and gases. For use with hot vegetable and mineral oils, which cause the polypropylene core to swell, the GN Series, with a glass filled nylon core, is preferred. For use with xylene, toluene or other aromatics, and for high temperatures, the glass filled nylon core is required. The Profile II RFN Series nylon filters should not be used in any oxidizing conditions or with water above 115 °F (40 °C).
The PE-Kleen filter combines the latest advances in polyethylene membrane technology with Pall’s unique crescent-shaped Ultipleat® filter technology. The result is a cartridge with the outstanding particle retention characteristics required by the semiconductor industry.
The PE-Kleen filter is specifically designed for the filtration of ultra-high-purity chemicals, including organic stripper and DHF. It is recommended for applications involving antireflective coatings and bulk filtration of 248 nm and 193 nm photoresist.
Excellent gel retention characteristics
High flow rates
100% integrity tested
Manufactured in a cleanroom environment
Available prewet, with Full-fill1 ultrapure water package
Pall Carbo filter elements are manufactured from high quality carbon material. The various grades of Carbo elements available are manufactured from different grain size fractions with the carbon grains being integrally linked by carbon bridges. Carbo filter elements exhibit a high chemical resistance, due to their binder-free carbon structure.
Carbo elements are utilised across a wide field of applications. The fine porous types with a smooth surface are particularly suitable for fine filtration utilising back-wash cleaning technology. The coarser types exhibit a slightly rougher surface, and these are ideal for use in pre-coat filtration applications employing cellulose as the filter aid has an affinity for the rough Carbo filter element surface.
The Aquasafe Dental Waterline Filter consists of a disposable in line filter device. It provides a worry free method to minimize exposure for patients and expensive dental equipment from dental waterline contamination.
Acuasafe Dental Waterline Filters reduce bacteria and particulate matter in dental Teatment water.
Aquasafe Dental Waterline Filters are anti-airlock filters all0wing entrained air to thtough hydrophobic vent membrane Air will not trap, accumulate or decrease water how.
The Aquasafe Dental 'Waterline Filter device controls waterline debris. microorganisms and reduces
bacteria counts to less than 500 colony forming units (du) per milliliter (per the CDC guideline)
The Aquasafe Dental Naterline filter device is lightweight and ergonomic. The device installs quickly onto any dental unit waterline include high-speed hand pieces, rainwater• siringes and ultrasonic sealers.
The Fluorodyne filter has been developed to meet the stringent requirements of today’s high purity DI water applications. Rated 0.2 μm, 0.1 μm and 0.04 μm, Fluorodyne filters offer ready wettability and broad chemical compatibility. All Fluorodyne filters are constructed of a unique modified PVDF membrane, providing superior bacteria and particle removal efficiency in demanding environments.
Reliable, Consistent Filtration Performance From Each Cartridge
• Graded pore structure for efficient removal of a wide range of particle sizes • Cost savings from long service filter life • Diverse range of removal ratings • Wide chemical compatibility • Suitable for liquid and gas filtration • High contaminant-holding capacity • Cartridges fit into most standard housings • Various cartridge sealing options • Numerous cartridge configurations • Manufactured under ISO 9001 quality system
The Pall® POLY-FINE XLD filter is an innovative synthesis of depth and pleated filtration technologies. This product combines the high flow capacity and low pressure loss of pleated filters, with the gel retention capability and long life of a depth filter.
The POLY-FINE XLD filter is an excellent choice for a wide range of digital printing inks. The construction of the POLY-FINE XLD filter has been tailored to meet the needs of digital ink formulation and the all-polypropylene construction is compatible with many of the current ink jet ink chemistries. The multi-layer media structure has been developed with fine dispersion classification and gel retention in mind.
Reference Pall literature publication 1254-B “Filtration Solutions for Ink Jet Ink Formulation” for specific recommendations.
Description and Key Features:
• Pall POLY-FINE XLD filters are pleated-depth filters with all-polypropylene construction. • Four nominal filter lengths are available: 10'/254mm, 20'/508mm, 30'/762mm, and 40'/1016mm. • Pall POLY-FINE XLD filters for digital ink filtration are available in key removal ratings from 1.5 to 10μm absolute (coarser grades are available for other applications).
HDC® II filter cartridges are constructed of pure polypropylene, high area, pleated media. This new generation of HDC II filters, unlike the original HDC filters and other polypropylene pleated filters, has incorporated a proprietary concept into its medium construction: varying the fiber diameter continuously to produce a pore size distribution from coarse (upstream) to fine (downstream). This unique construction permits more contaminants to be trapped in the outer layers of the medium, thus substantially increasing dirt-holding capacity. The finer inner layers are essentially unchanged from those of the original HDC medium, thus maintaining the absolute rating of the filter.
Relative filter life studies, both in the laboratory and in the field, have shown that this new construction increases service life as much as four times compared to other filters of similar appearance.
Removal ratings range from 0.6 μm (micron) to 70.0 μm absolute. Refer to Bulletin HDC 700 for more detailed information.