Pammvi Group Of Companies

Steinel 230V indoor ceiling mount ultrasonic motion sensor light with LEDs for corridor, Passage, Aisle and Stairway.

Product Name:  RS PRO LED S1

Reach: 1 - 8 m dia. radially Angle of coverage: 360° - 4 directional detection

Applications: Corridor, Passage, Aisle, Stairway.

Technology: High Frequency / Ultrasonic - Very sensitive to small movement

Mounting: Ceiling Mount High Frequency Motion Sensor Light - 2.8 meters mounting height 

Output: 18 W LED (1.8 W Dimmed) 

Dimming and Brightness Control :

 10 % when dimmed (1.8 W)

a) All night

b) 10 min. after selected time elapses

c) 30 min. after selected time elapses 

Time Setting: 5 sec. - 15 min. + install mode

Lux setting: 2-2000 Lux with a teach in mode for automatic lux programming

Master & Slave: Wireless communication system for creating light groups. Maximum reach is 30 meters inside the building with no radio interference. Wireless 'ON'/'OFF' selector switch.

Steinel  230V outdoor wall mount PIR motion sensor halogen light for Outdoor Security and Surveillance in Office, Hotel, Residential Building, Factory and Godown.

Product Name : HS 2160 ECO [Outdoor wall mount PIR motion sensor halogen light

Type : 160° Wall mounted Sensor switched halogen floodlight

Application : Outdoor Security and Surveillance in Office, Hotel, Residential Building, Factory and Godown.

Technology : Wall mount PIR motion sensor light

Reach : 12 meters 

Time Setting:  8 Sec - 35 Minutes

Lux setting : 2-2000 Lux

Load switching: 300 W max. (Uncorrected, inductive e.g. fluorescent lamps)

Steinel 230V  indoor ceiling mount ultrasonic motion sensor for toilet, bathroom, WC and washroom in BPO, corporate office, residential buildings & hotel.

Product Name : Presence Control PRO HF 360 Ultrasonic motion

Reach: 1 - 8 m dia. radially Angle of coverage: 360° Angle of aperture: 140°

Applications: Toilet, WC, Restroom, Wash room, Bathroom etc.

Technology: High Frequency / Ultrasonic - Very sensitive to small movement.

Mounting: Ceiling Mount Ultrasonic Motion Sensor - Mounting Height: 2.8 mtrs

Output: 1000 W uncorrected inductive loads like t5 lights, CFL, fluorescent lamps/tubes with electronic ballasts.

Automatic Time Adjustment: The sensor analyzes the movement and automatically adjusts the time delay for the user.

Manual Time Adjustment :30 sec. - 30 minutes with Pulse mode (approx. 2 sec)

Lux setting : Lux level with Twilight setting can be done through a hand-held remote control. There are 6 typical room situations to choose from.

Steinel 230V indoor Ceiling mount dual channel output DALI PIR presence occupancy sensor with lighting scene & HVAC  controls in conference room, Training Hall, Meeting, Class, Staff room, Office Cabin.

Product Name: Presence Control PRO IR Quattro HD COM2 (DALI - Digital DIM Interface for Controlling 2 Lighting Channels)

Reach: 8 - 20 mts. adjustable in a square detection pattern to eliminate any blind or undetected areas. The fine / small motion area is 8x8 mts. (64 sq.-mts.)

Mechanically Adjustable Reach:

The square detection zone can be mechanically adjusted with a potentiometer for specific detection in the area.

Technical Highlights: The sensor has 2 channels, one for the DALI dimmable ballast output. The second channel operates the heating, ventilation and air conditioning systems in relation to presence only.

Applications: Conference room, Training Hall and Meeting room, Class room, Staff room, Office Cabin.

Mounting:

Ceiling Mount Passive Infrared PIR Occupancy Sensor - Mounting Height: 2.5 mts to 10 mts.

Output:

DALI Output No.1 & No.2 : 12 DALI electronic ballast can be interfaced per output totaling 24 ballast per sensor.

Time Setting: Basic Brightness Threshold time - 30 sec. - 30 minutes .

HVAC Channel : 1A max. for connection to a relay or contactor to switch HVAC loads. 

KNX 24V PIR presence detector with digital field bus interface for lighting automation, dimming, HVAC & scene control, shutter and blind control management.

Product Name: Presence Control PRO IR Quattro HD COM2

Reach: 8 - 20 mts. adjustable in a square detection pattern to eliminate any blind or undetected areas. The fine / small motion area is 8x8 mts. (64 sq.-mts.)

Applications : Conference room, Training Hall and Meeting room, Class Room, Staff Room, Office Cabin

Mounting: Ceiling Mount PIR Presence Sensor - Mounting Height: 2.5 mts to 10 mts.

Settings: Digital Bus Interface using the ETS software or remote control.

Lighting Channels

Light 1 - Light 4

(4 scene controls)

Stay - "ON" time

Lighting Controller Time Suitable for switching / dimming and scene control up to 4 scenarios. Constant light control with mixed light measurement.

1 - 30 minutes depending on presence and brightness

Automatic time adjustment - The sensor analyzes the movement and automatically adjusts the time delay for the user.

Basic brightness 'ON' duration, 1-30 minutes 

HVAC Channel

Lux setting : The light measurement operates in relation to ambient brightness and lux level using the mixed light measurement format. The basic brightness or courtesy light level has two stages -

1. OFF

2. 10% - 50%

Digital Outputs 1. Presence Detection

2. Lighting Control

3. Brightness Control

4. HVAC Control

Steinel 230V outdoor Wall Mount PIR Motion Detector Halogen lights for Main Entrance, High Indoor Space, Foyer, Locker Room, Warehouse and Machine Shop.

Product Name : HS 152 XENO

Detection Zone :Basic setting 1: 12 m max.

Basic setting 1: 5 m max.

+ precision adjustment using shrouds; temperature stabilized

Detection Angle: 180° with 90° angle of aperture

The head tilts and swivels

Applications: Outdoor lighting for large open spaces, building facade, security and surveillance, intrusion detection - Main Entrance, High Indoor Space, Foyer, Locker Room, Warehouse and Machine Shop

Technology: Passive Infrared / PIR

10 detection levels with 504 switching zones (12 m)

9 detection levels with 412 switching zones (5 m)

Mounting Wall Mounted

Output: 150 W max. / R7s. Additional switching of 400 W uncorrected inductive loads like fluorescent lamps/tubes with electronic ballasts

Time Setting:  10 sec. - 15 min. 

Lux setting: 2-2000 Lux  

Steinel 230V indoor ceiling mount PIR presence occupancy sensor for lighting control in conference, staff & meeting room, Training, Sport Hall  Classroom, Library, Laboratory, Auditorium and Gymnasium

Product Name: Presence Control PRO IR Quattro HD COM1

Reach: 8 - 20 mts. adjustable in a square detection pattern to eliminate any blind or undetected areas. The fine / small motion area is 8x8 mts. (64 sq.-mts.)

Applications: Conference room, Training Hall and Meeting room, Classroom, Staff room, Library, Laboratory, Auditorium, Sport hall and Gymnasium

Technology: Passive Infrared / PIR - 4800 switching zones and 13 detection levels for sensing small movements normally found in a seated postion, with 4 highly sensitive pyro detectors. The digital technology improves signal evaluation without switching errors.

Mounting: Ceiling Mount PIR Occupancy Sensor - Mounting Height: 2.5 mts to 10 mts.

Output: 1000 W uncorrected inductive loads like t5 lights, CFL, fluorescent lamps/tubes with electronic ballasts. 

Automatic Time Adjustment: The sensor analyzes the movement and automatically adjusts the time delay for the user. 

Manual Time Adjustment: 30 sec. - 30 minutes with Pulse mode (approx. 2 sec) 

Lux setting: Lux level with Twilight setting can be done through a hand-held remote control. There are 6 typical room situations to choose from.

Master & Slave: Individual luminaries can be hardwired for connecting them in parallel which is suitable for the Master & Slave Operation and enhancement of the zonal coverage of detection.

Photocell sensor & photoelectric lighting controller for outdoor lighting

Photoelectric light switch, photocell sensor, light sensor, lux sensor and lux level switch for exterior street lighting for automatic lighting control and energy saving.        

Product name :  Nightmatic 2000

Microprocessor based photoelectric lighting controller / lux switch

Switching light 'ON' automatically at night

Twilight switching threshold: 2 - 10 lux selectable by pressing a button

Turns off lights at dawn.

Steinel Ceiling mount ultrasonic motion detector and PIR motion sensor for car parking area & garage lighting control, Toilet, WC, Bathroom, Restroom and Cloakroom.

Product Name: HF 3360 [Ceiling Mount Ultrasonic Motion Sensor]

Type:  360° Ultrasonic Motion Sensor

Application : Car Parking Lot and Garage and Toilet, WC, Bathroom, Restroom and Cloakroom.

Technology : High Frequency / Ultrasonic Ceiling mount motion sensor

Reach : 1 - 8 meters variable range setting

Time Setting:  5 Sec - 15 Minutes

Lux setting : 2-2000 Lux

Load switching : 1000 W uncorrected inductive loads like fluorescent lamps/tubes with electronic ballasts - 230V AC 50 Hz  

Steinel 230V indoor wall mount high frequency ultrasonic motion sensor light for toilet, WC, wash room, Bathroom, Changing room, cloakroom and kitchen.

Product Name :  BRS 83

Reach: 0.5 - 4 m dia. radially. Close up range approximately 5 cm. Can be switched 'ON' / 'OFF' by no-contact close space range sensor manually.

Type : Angle of coverage - 360° 

Applications: Toilet, WC, Restroom, Wash room, Bathroom, Changing room, Cloakroom and Kitchen.

 Technology:  High Frequency / Ultrasonic - Very sensitive to small movement

Mounting: Wall Mount Ultrasonic Motion Sensor Light - 2.8 meters mounting height

Wattage: 1x24W tubes with one individual chip controlled electronic ballasts which are fast starters less than 0.8 sec. compared with 1.6 or even 1.9 sec. Additional power socket to connect parallel electrical loads.

Technical Highlights: Can be switched 'ON' / 'OFF' by no-contact close space range sensor manually. Suitable for hotels, medical departments and hospitals where hygiene, cleanliness and electrical safety is of importance.

Time Setting:  1 - 15 Minutes infinitely variable 

Lux setting : 2-2000 Lux

Master & Slave: Individual luminaries can be hardwired for connecting them in parallel which is suitable for the Master & Slave Operation and enhancement of the zonal coverage of detection by creating lighting groups.

Steinel 230V outdoor wall mount PIR motion sensor 25W LED floodlight for security, safety and surveillance in residential, commercial building and Outdoor lighting for large open space.

Product Name: XLed 10

Reach: 12 mts. all round, temperature-stabilized, Angle of coverage: 240°. The head tilts and swivels

Applications: Outdoor lighting for large open spaces, building facade, security and surveillance, intrusion detection.

Technology: Passive Infrared / PIR - 304 switching zones and 9 detection levels with 2 highly sensitive pyro detectors.

Mounting: Floor Mounted Wall Mounted

Output: 25 W @ 10 LEDs. Additional switching of 400 W uncorrected inductive loads like fluorescent lamps/tubes with electronic ballasts

Dimming and Brightness Control :

 10 % when dimmed (approx. 3 W)

• 10 minutes after time setting elapses
• All night 

Time Setting:  5 sec. - 15 min. (manual override 4 hours - selectable)

Lux setting: 2-2000 Lux  

Steinel 230V indoor wall mount PIR motion sensor for car parking area, Exterior Building Wall, Security and Surveillance.

Product Name: sensIQ

Reach: 2 - 20 m adjustable in 3 directions by a controlled dial. Angle of coverage 300° with detection directly below the sensor.

Applications: Car parking Area, Exterior Building Wall, Security and Surveillance

Technology: Passive Infrared / PIR - 1360 switching zones and 6 detection levels for long distance detection and 5 levels for sneak-by guard (for intrusion), with 4 highly sensitive pyro detectors.

Technical Highlights : Soft-Start Module

The light is gently switched 'ON' and 'OFF' by remote control. You can set the basic brightness level(convenience levels) and when movement is detected the light is switched to full power.

Floating Module : This module permits the operation of independent devices and system by providing a low voltage output, eg. security systems, air conditioning and building management systems.

Mounting Wall and Ceiling mount. For Corner mount, a designer-style wall mount creates a harmonious marriage between sensor and building. Mounting height: 2.8 mts.

Output : 1000 W uncorrected inductive loads like t5 lights, CFL, fluorescent lamps/tubes with electronic ballasts 

Time Setting: 5 sec. - 15 Minutes + Pulse mode (approx. 2 sec.) 

Lux setting: 2-2000 Lux with twilight setting possibility through a hand-held remote control for setting lux levels. Manual override of 4 hrs through the remote control or push buttons

Master & Slave: Individual luminaries can be wirelessly connected using a bi-directional wireless module. The system has 32 addresses for creating complex inter-connected groups. Maximum reach is 30 meters inside the building.