Pammvi Group Of Companies

Steinel Ultraheat Hot Air Blower - universally applicable tool, ergonomic & quiet compact device. It is used in various fields of application, such as shrinking, car wrapping & film bonding, packaging, Rapid shaping of floor covering, heating, paint stripping and much more.

 

Model Number : SV900 Ultraheat
 
Technical Specification:
Voltage: 220/230V
Output: 1600 W
Temperature, Airflow Rate: 350 °C , 250 l/min
Stage 1
Temperature, Airflow Rate: 500 °C , 450 l/min
Stage 2
Weight: 700 g

Multiple Application of Ultraheat Gun:

• Garment Drying after printed
• Heat Shrink Sleeve / Packaging / Tubing
• Stripping Paint / Varnish / PVC Sticker
• Softening of Adhesive / Curing
• Drying or Thawing or Preheating or Evaporating
• Shaping, Bending & Welding of Thermoplastic
• Loosening of Rusted Nut & Bolt/ fitting. 

Hot air blower for desoldering & removal of SMD ICS from circuit board

Steinel germany - high-end hot air heat gun for removal of SMD IC’s & pth components, microprocessors of mini systems, mobile phones, CTV, LCD TV, or any other electronic chassis is difficult using our normal soldering irons useful to facilitate easy rework without damaging the ic and the circuit board. Main applications - heat shrinkage, paint removal, defrosting, soldering & de-soldering, tin melting, pre-heating, sterilizing copper.

Model number : HL 2010 E

Technical specification:

Voltage        230-240 V, 50 hz

Output         2000 w

Temperature, airflow rate :

Stage 1         50°c, 150 l/min

Temperature, airflow rate:

Stage 2         50 - 630°c, 300 l/min

Temperature, airflow rate :

Stage 3         50 - 630°c, 500 l/min

Temperature setting: in 10 °c steps

Temperature display: LCD display

Weight: 860 g

Feature:

Three stage airflow

Dual air vents

Soft-stand for secure hold

Industrial grade rubber power cord.

Self-resting.

Hot Air Gun For Sun Control Reflective Film Installation On Glass Window

Steinel window tinting kit - heat gun for sun rays control - film installation on glass window. Protect car from UV rays and heat. Sun control window film can be applied on the glass of any automobile Window, Residential Window & commercial window etc. This film is to reduce the heat generated by the rays of the sun falling.

Sun control reflective film block UV ray, reduce heat and glare, increase the security and safety etc. can be installed on all sorts of surface.

Model Number: HG 2310 LCD

Technical Specification:
 
Voltage:         230 V / 50 Hz
Output:         2300 W
variable Temperature:            
stage 1: 50° C
stage 2: 50 – 650° C
Display Mode:LCD in 10° C steps
Blower         continuously adjustable
Airflow rate:
stage 1: 150 – 250 l / min.
stage 2: 150 – 500 l / min.
Weight:940 g
  

Feature:

• High quality of hot heat setting.
• Sturdy casing for held-held and self-resting use
• Visual display of temperature and speed on LCD
• Four factory-set programmers:
• Double overheating protection: thermostat and thermal cut-out
• Air intake with lattice guard to keep out debris
• Soft pistol grip handle and soft stand for stability
• Great for removing stickers, forming plastic, softening caulking, heating frozen pipes, removing paint, removing varnish, and much more.

STEINEL electronically controlled Plastic Welding Kit for the repair and fabrication of thermoplastic vehicle body part, interior vehicle component, boat, PVC plastic pipe & fence, plastic wood, tank, trash receptacle, liner. Motorcycle, ATV's, & personal watercraft. Vehicle component can easily crack or break in crashes which can be repaired with our plastic welding kit.

Model Number: HG 2310 LCD
Technical Specification:  
Voltage:         230 V / 50 Hz
Output:         2300 W
variable Temperature:            
stage 1: 50° C
stage 2: 50 – 650° C
Display Mode:LCD in 10° C steps
Blower         continuously adjustable
Airflow rate:
stage 1: 150 – 250 l / min.
stage 2: 150 – 500 l / min.
Weight:940 g
 
Feature:
Sturdy casing for held-held and self-resting use
Visual display of temperature and speed on LCD
Four factory-set programmers:
Double overheating protection: thermostat and thermal cut-out
Air intake with lattice guard to keep out debris
Soft pistol grip handle and soft stand for stability

Steinel's electronic hot air guns ensure precise temperature and air flow settings for smooth and quick shrinking of thermoplastic shrinkable pvc and polyolefin cable sleeves for wire harness, cables and wires. For best results use the reflector nozzles with these heat shrink hot air blowers. These are commonly used for electric and electronic panel building, automotive, aviation, garage tools, motor workshops, car workshops, automobile workshops, ship building applications.

the electronic heat guns with lcd displays offer the ideal shrinking solution for cable jointing, wire connections and terminations. To ensure even and tight shrink joints use the hot air gun accessories specified by steinel. Ideally suitable for applications in aerospace, mro, automation etc.

in the electronics and mro industries heat guns are often used to make and protect wire connections. This is done by sliding a heat shrink tube of the appropriate diameter over the connection and then shrinking it on using hot air at 350 – 500°f (175 – 250°c) and a reflector nozzle. Steinel heat guns offer precise, even heat allowing the user to effectively control temperature output and prevent scorching or blistering the tubes and sleeves. The 9mm reducer is recommended for repairs where a smaller diameter shrink tube is being used.

solder sleeves with an integrated solder ring or crimp connection are available to ensure that a reliable electrical connection is made. They are also available with an adhesive coating on the inside for watertight connections. The 14mm reflector fit solders sleeves well, making it a great choice for this application. Similarly the automotive and aerospace industries use heat shrink and solder sleeves

heat shrink tubing
steinel hot air guns are used extensively for pvc and pe shrink tubing which find applications in various industries like transformers, switch gears, motor transformer, thermal protector, cable utilities, cable assembly, wire harness assembly etc. Perfect cable and wire terminal jointing is achieved by the application of heat on shrink tube applied over the wire end terminal joints. Microprocess based electronic hot air blowers provide consistent air delivery with accurate temperature control for achieving a tight shrink leading to a good connection. It is also used in applications involving consumer goods, electrical applicances etc. For best results use only steinel nozzles and accessories.

wire harnessing
the automotive, electronics and aerospace industries use heat guns in the manufacture of wire harnesses. This is done by placing wire bundles into the appropriate sized tubing and shrinking it down to hold the wires in place. Applying hot air at 350 – 500°f (175 – 250°c) will shrink the tube to the correct size. Precise and consistent temperature is crucial in this process to prevent damage to the wires and to prevent scorching or blistering the shrink tubing. The 75mm and 39mm reflector nozzles are a popular choice for this application because they direct hot air around a larger diameter bundle of wires. heat guns are also used in wire harness shops to cauterize the ends of wire harness braids.

Steinel Heat Guns are regularly used for the fabrication of UPVC, HDPE and PVC based thermoplastic components like chemical tanks, pipes, doors & windows. Ideally suitable for applications requiring precise temperature and airflow control. The heat blowers also have LCD / LED display with an ergonomic handle for easy handheld grip.
  Industrial quality continuous use heavy duty heat torch blowers from Steinel can be used in demanding site conditions. Accessories and nozzles facilitate maximum utilization of the airflow.
 
Model Number: HG 2000 E Electronic

Technical Specification:

 Voltage:       230 V / 50 Hz (other voltages also available)

Output:        2000 W

Airflow rate: at least 300 l/min. / 500 l/min. max.

Variable temperature control continuously 

2 Stages

Weight: 620 g

 

Feature:

 

• Electronic temperature control.
• Low weight and slim-line form
• Overlap Welding Nozzle (roof, tarp, tent, liner)
• Adjustable Air flow rate.
• Hand-held and self-resting.

The electronic heat guns with LCD displays offer the ideal shrinking solution for cable jointing, wire connectionsand terminations. To ensure even and tight shrink joints use the hot air gun accessories specified by Steinel. Ideally suitable for applications in aerospace, MRO, automation etc.

Steinel Hot Air Blower for Tent, roof, tarp, banner, pool liner and pond liner are made out of a thermoplastic material and can be heat welded and repaired with heat gun without the need for glue or sewing. These material will weld to themselves.  Billboard, sign, awning, store front, party tent, flat roof, sport dome and architecture fabric made from a reinforced thermoplastic coated material. Pool liner and pond liner are typically made of a non-reinforced HDPE, LDPE or PVC liner material. 

Model Number: HG 2000 E Electronic

Technical Specification:

 Voltage:       230 V / 50 Hz (other voltages also available)

Output:        2000 W

Airflow rate: at least 300 l/min. / 500 l/min. max.

Variable temperature control continuously 

2 Stages

Weight: 620 g

Feature:

• Electronic temperature control.
• Low weight and slim-line form
• Overlap Welding Nozzle (roof, tarp, tent, liner)
• Adjustable Air flow rate.
• Hand-held and self-resting.

Steinel Heat gun for welding & roofing application - like welding of modified bitumen, roofing bitumen sheet, bitumen sheet installation, EPDM roof sheet removal. Hot air gun is also used for flat roof welding, roofing near vent & overlap welding.
 
Model Number: HG 2300 EM
 
Technical Specification:
Voltage : 230 V / 50 Hz
Output: 2300 W
Temperature25 - 600° C
Airflow rate:         600 l / min. max.
Weight :         850 g

Feature:

•     Uniform welding results
•     Flameless welding of modified bitumen
•     High working speed
•     Easy control of hot air volume
•     High-performance, long-life brushless motor
•     Barrel shape for optimum stationary use
•     Fully electronic temperature and airflow control