Pammvi Group Of Companies

• Detection Zone:-
• Reach: 1 - 8 m dia. radially Angle of coverage: 360° - 4 directional detection

• Applications:-
• Car Parking Areas, Corridors, Passage, Aisles, Stairways.

• Technology:-
• High Frequency / Ultrasonic - Very sensitive to small movement

• Mounting:-
• Ceiling Mounted Sensor Light - 2.8 metres mounting height

• Wattage:-
• 2x28 W -T5 with 2 individual chipcontrolled electronic ballasts which are fast starters less than 0.8 sec. compared with 1.6 or even 1.9 sec- Additional output available for load switching.

• Time Setting:-
• 1 - 20 Minutes variable with 100 hour burn in feature for new tubes

• Lux setting facility:-
• 2-2000 Lux with a teach in mode for automatic lux programming

• Master & Slave:-
• Infra Red Control available for parameter settings

• Emergency operation:-
• Light Shunt for switching over to emergency power lines if standard supply fails
• Supply:-
• 230V AC 50Hz  

Detection Zone:-

Reach: 1 - 8 m dia. radially Angle of coverage: 360° - 4 directional detection

Applications:-

Corridors, Passage, Aisles, Stairways. .

Cooling System:-

Cooling fins and light diffuser are merged into a slim-line design which ensures optimum cooling of the LEDs thereby enhancing their life.

LED Life Cycle :-

The temperature of the LEDs is electronically monitored all the time. The system controls the output to suit demand thereby providing optimum light and maximizing the LED life.

Technology:-

High Frequency / Ultrasonic - Very sensitive to small movement

Mounting:-

Ceiling Mount High Frequency Motion Sensor Light - 2.8 metres mounting height

Output :-

18 W LED (1.8 W Dimmable)

Light Colour:-

4000 Kelvin

Time Setting:-

5 sec. - 15 min. + install mode

Lux setting facility:-

2-2000 Lux with a teach in mode for automatic lux programming

Master & Slave:-

Wireless communication system for creating light groups. Maximum reach is 30 metres inside the building with no radio interference. Wireless 'ON'/'OFF' selector switch.

Supply:-

230V AC 50Hz.

Detection Zone:-

Reach: 12 mts. all round, temperature-stabilised, Angle of coverage: 240° . The head tilts and swivels 

Applications:-

Outdoor lighting for large open spaces, building facade, security and survelliance, intrusion detection

Cooling System:-

The heat management for these LED floodlights is undertaken by a microprocessor-based patented active thermo controlled system. The heat dissipation is done through cooling fins. The temperature of the LEDs is measured continously for it's thermal management.

LED Life Cycle:-

The temperature of the LEDs is electronically monitored all the time. The system controls the output to suit demand thereby providing optimum light and maximizing the (at 3 hours/day , approx. 45 years)

Technology:-

Passive Infrared / PIR - 304 switching zones and 9 detection levels with 2 highly sensitive pyro detectors.

Mounting:-

Floor Mounted

Wall Mounted

Output:-

25 W @ 10 LEDs. Additional switching of 400 W uncorrected inductive loads like fluorescent lamps/tubes with electronic ballasts

Time Setting:-

5 sec. - 15 min. (manual override 4 hours - selectable)

Lux setting facility:-

2-2000 Lux

Supply :-

230V AC 50Hz

• Detection Zone:-
• Reach: 2 - 20 m adjustable in 3 directions by a controlled dial. Angle of coverage 300° with detection directly below the sensor.
• Applications:-
• Car parking Areas, Exterior Building Walls, Security and Surveillance
• Technology:-
• Passive Infrared / PIR - 1360 switching zones and 6 detection levels for long distance detection and 5 levels for sneak-by guard (for intrusion), with 4 highly sensitive pyro detectors.
• Technical Highlights:-
• Soft-Start Module
• The light is gently switched 'ON' and 'OFF' by remote control. You can set the basic brightness level(convenience levels) and when movement is detected the light is switched to full power.
• Floating Module 
• This module permits the operation of independent devices and system by providing a low voltage output, eg. security systems, air conditioning and building management systems.
• Mounting:-
• Wall and Ceiling mount. For Corner mount, a designer-style wall mount creates a harmonious marriage between sensor and building. Mounting height: 2.8 mts. 
• Output:-
• 1000 W uncorrected inductive loads like t5 lights, CFL, fluorescent lamps/tubes with electronic ballasts
• Time Setting:-
• 5 sec. - 15 Minutes + Pulse mode (approx. 2 sec.)
• Lux setting facility:-
• 2-2000 Lux with twilight setting possibility through a hand-held remote control for setting lux levels. Manual override of 4 hrs through the remote control or push buttons.
• Handheld Remote Control:-
• Infra Red Control available for parameter settings
• Supply:-
• 230V AC 50Hz
• IP Rating:-IP 54

Detection Zone:-

Reach: 1 - 8 m dia. radially Angle of coverage: 360° - 4 directional detection. Maximum area covered 50 sq.-mts

Technology:-

High Frequency / Ultrasonic - Very sensitive to small movement

Mounting:-

Ceiling Mount Ultrasonic Motion Sensor Light - 2.8 metres mounting height.

Wattage:-

1x13W tubes with one individual chipcontrolled electronic ballasts which are fast starters less than 0.8 sec. compared with 1.6 or even 1.9 sec. Additional output available for load switching about 100 W for (eg. bathrooms / WC / Restroom extractor fans or lights)

Time Setting:-

1 - 20 Minutes infinitely variable

Lux setting facility :-

2-2000 Lux

Supply:-

230V AC 50Hz 

• Features:
• Battery-Operated Wireless Sensor and Wireless Motion Sensor LED Lights
• Distance of Wireless Communication : 100 mts.
• Fast, easy installation without cables 
• Reliable wireless communication on the 868.3-MHz band

• Applications:
• Lights switch 'ON' automatically to deter intruders 
• Surveillance of private, commercial, industrial, public as well as remote areas and spaces

• Convenience:
• Automated lighting
• Lights and loads switch 'ON' and 'OFF' by themselves