Panchshil Bearing Company

Our clients can avail from us an exclusive range of Bearing Fitting Tool Kit that are used for shaft mountings, housing and blind applications. The kit has 36 impact rings in various sizes to facilitate the mounting of more than 400 different bearings. Impact rings and sleeves are fabricated using high-impact resistant material for longevity.

The diameter has perfect inner and outer fittings of the bearings. These small diameters on top of the impact area of the sleeves enable in the effective transmission and distribution of the mounting force.

• Click connection between impact rings & sleeves enable stability & durability
• Even body surface provides excellent grip
• The impact rings are marked for clear visual identification of the easy selection & size of the ring
• The nylon double-side head of the dead-blow hammer prevents damaging the components
• The rubber hand grip of the dead-blow hammer provides excellent grip

We offer a wide range of Electric hot plate - 729659 C that is procured from trusted vendors in and quality tested on all parameters. It consumes less energy and has adjustable temperature range of 50 - 200 °C (120 - 390 °F). Used for keeping food hot, it encompasses protective cover to avoid contamination during heating. The range is available in various sizes and dimensions and can be custom made as per the specifications of the clients.

Technical Data:

We offer quality range of Hydraulic pump TMJL 100 that are large oil containers and have 100 MPa (14500 psi). The oil container capacity is 800 cm³ (48 in³) with extra litre of mounting fluid. The pumps encompass SKF hydraulic assisted pullers TMHP series and are suitable for hydraulic nuts smaller than or equal to HMV 92E. Further, we also offer customization facilities and pack these in a sturdy protective case.

• SKF hydraulic nuts smaller than or equal to HMV92E
• All other oil injection applications where the maximum pressure is 100 MPa (14,500 psi)
• SKF hydraulic assisted pullers TMHP series

Technical Data

Our firm is engaged in offering a wide range of Hydraulic Pump TMJL 50; 50 MPa (7250 psi). These large oil containers have a capacity of 2 700 cm3, 165 in3 along with extra litre of mounting fluid. The pumps include a over pressure valve and are packed in sturdy protective cases.

• Low pressure side of SKF OK couplings
• Larger size hydraulic nuts (larger than or equal to HM V 9AE)
• All other oil injection applications where the maximum pressure is 50 MPa (7,250 psi)

We offer an exclusive range of Impact spanners - TMFN series that are safe and user friendly. The spanners are used for avoiding shafts and nut damages and known for their sturdy construction and durability. The spanners can also be customized as per the client’s requirements.

• Suitable for nuts of series KM, HM.T, HML.T, HM 30, HM 31, AN.., N. and N... (For nut sizes 23 and above)

• Special wide impact face

Our organization is engaged in offering a wide range of SCORPIO Induction Heater - TMBH 1 that is light weight and portable available in 4, 5 kg 10 lbs. It has non-magnetized components that include a heating clamp, temperature probe, power cable, heat resistant gloves and a carrying case. The heating efficiency is better than 85%. The heater is equipped with temperature and time control.

We are one of the leading suppliers of Induction heater trolley of the TIH T1 model. The 5KFTIH Tl trolley is used for improving the mobility when using large SKF induction heaters. The trolley has a high carrying capacity of up to 900 kg (1,934 lb) and is fitted with a drawer with an oil resistant mat and two adjustable dividers. The range is available in various sizes and shapes and can be customized as per the client’s specifications.

Technical Data:

• Width: 50 cm (20 in)
• Height: 74 cm (29 in)
• Length: 72 cm (28 in)
• Capacity: 900 kg (1,934 lb)

The range of Portable Induction Heater - TIH 030m is light weight and has automatic demagnetization features. These have 2-step power setting and smaller yokes allow safe heating smaller bearings and 20, 9 kg (46.0 lb) facilitating portability. It has a temperature mode pre-set at 110 °C (230°F) that prevents over-heating of bearings. Compact in design, the heater is capable of heating a 28 kg (61.7 lb) bearing in just 20 minutes. Further, the heaters have power saving capacity along with low cost solutions. The range possesses a 3 year warranty and can be custom made as per the requirements of the clients.

We offer a wide range of Special Working Gloves of TMBA G11W model. The gloves are tested and certified according to EN 388 standard. The lint free gloves are used for various purposes in the steel, mining, and sugar industry. These are abrasion and tear resistant and provide excellent grip to the wearer, thereby increasing their work efficiency.

Features:

• Blade cut resistant
• Puncture resistant
• Withstand high temperature