Paramount Conductors Limited

This machine is designed, developed and manufactured for forming Armature coil of Traction Motors - The basic function of this is to form / bend Evolute, Curvature forming of Pinion side overhang, slot section forming and connection end curvature forming. This machine is PLC controlled and is designed for mass production of Armature coil of similar type. This is required for the manufacture of Armature Coils.

The Single/Double Deck Bull Block Non-Slip type wire drawing machines are designed for drawing of metals like Copper/Aluminium/Mild steel. The main body is made out of quality-grade cast iron. The transmission system consists of worm and worm wheel gears that are manufactured on sophisticated gear Hobbing machines. The die box is provided with two chambers for die sitting and for drawing compounds. The spooler is either with friction clutch drive or with torque motor drive (at additional cost) for winding of drawn Bare Copper/Aluminium wire. Model AII/SD/III AII/DD/II No. of Draft 1 2 No. of Blocks 1 1 Diameter of Block 850 -- 700 - top deck 540 - bottom deck Inlet wire size max Al: 18.00 Cu: 13.50 MS: 10.5 CS: 9.50 Al: 16.00 Cu: 12.50 MS: 9.50 CS: 9.50 Finished dia min 2.50 2.50 Power 40 hp 30 hp

Fine Wire drawing machine is wet slip, stepped cone type suitable for drawing Aluminium and Copper wire using number of dies in tandem. The machine has horizontally mounted stepped capstans that are hardened and ground finished and mounted on antifriction bearings. The die holders are adjustable and are provided in between each capstan unit. Separate pipeline is provided over each die for forced lubrication and cleaning of dies. The main drive to the machine is by 15kW/20hp Eddy current coupling drive or DC Thyristor controlled. We can also offer Ultra fine wire drawing machine for drawing range from 38 to 46 swg (0.152 to 0.061mm). Specifications: Model AII/FWD/21HS AII/UFDM/18/HS Type Wet slip type Wet slip type Material Annealed or hard drawn Al/Cu Annealed or hard drawn Copper No. of dies 21 18 Inlet wire size 17 to29swg (1.4 to 0.381) mm Inlet size 0.5mm max Outlet size 22 to 41swg (0.711 to 0.168) mm 38 to 46swg (0.152 - 0.061) mm Capstans Four stepped Cone type Four stepped Cone type No. of Drafts Max: 21, Min: 07 Max: 18, Min:07 Area reduction/drafts 17% max between the cone pulleys.2.5% slip permitted. Hence reduction 15 to 17% 18% approximately Total reduction in one pass 98.14% - Drawing speed 1500m/min 1800m/min Traverse Roll ring Roll Ring Spooler Capacity Al: 15kg, Cu: 50Kg Cu: 20kg

Wire drawing machine is wet slip, stepped cone type suitable for drawing non-ferrous metals like Aluminium and Copper using a numbers of dies in tandem. The machines have horizontally mounted stepped capstans which is hardened and ground finished. The drive to individual capstan shaft is provided through Helical Gears manufactured on Hobbing machines. The gear train is housed in steel fabricated solid body and is oil immersed for smooth running. The die holders are adjustable and are provided between each capstan unit. Separate pipeline is provided over each die for forced lubrication and cleaning of dies. Various models like AII/MWD/13, AII/MWD/11,AII/MWD/9 to suit individual drawing requirements are available. Model AII/MWD/13 Type : High speed, Wet slip type Material : Annealed or hard drawn Al/Cu Inlet size φ : Al: 3.60, Cu: 3.25 Outlet Size φ : 15 25 swg, (1.8-0.50 mm) No. of Capstan : 13 nos. Horizontally mounted No. of Dies : 13 max and 7 min Area Reduction per draft : 20.6% for 1st to 12th die 16 to 18 % for last die Total reduction in one pass : 95% max Spooler capacity : Al: 40 kg, Cu: 120 kg

The Hydraulic coil spreader is most versatile machine as it forms shapes and spreads the loop both light and heavy sections into diamond shaped coils quickly from small 300 - 10000 HP. Hydraulic coil spreading machine is rotating arm type. Rotation of arm is identical to stator axis All dimension of coil are transferred direct to the machine. This principle of operation make coil spread in natural form. Thus also avoid strain on copper and slipping of conductor in overhang. No hand forming required for overhang. Scales are provided for repeatability.

Paramount offers a complete range of insulated conductors / winding wires used for the winding of electrical machines such as motors, generators, transformers, lifting magnets etc. We have more than three decade of experience in the field of this manufacturing. Over the years we have worked closely with a number of customers to develop products to suit their requirement and to achieve higher efficiency. Our experience in machine manufacturing and motor/generator rewinding gives us better understanding of the needs of our customers. our plant is equipped with sophisticated machines and testing instruments to meet requirements of customers. Paramount manufacturers insulated conductor and winding wire confirming to international specifications and as per customer specifications. - double fibreglass yarn covered varnish bonded - enamelled double glass yarn covered varnish bonded - enamelled/polyester taped glass yarn covered varnish bonded - kapton*/nomex*/teflon*/mica/cotton covered - double/multi kraft paper covered - subermisible winding wire.

We Supply wide variety of Bio Mass Gasifier.

Wooden pager rotating machine
Back in 1998, I wanted to test how the Blackberry pagers we developed would perform as they are moved sporadically through the local environment

Wire drawing machine is wet slip, stepped cone type suitable for drawing non-ferrous metals like Aluminium and Copper using a numbers of dies in tandem. The machines have horizontally mounted stepped capstans which is hardened and ground finished. The drive to individual capstan shaft is provided through Helical Gears manufactured on Hobbing machines. The gear train is housed in steel fabricated solid body and is oil immersed for smooth running. The die holders are adjustable and are provided between each capstan unit. Separate pipeline is provided over each die for forced lubrication and cleaning of dies.