Flame Retardant Heat Shrinkable Tubes 2:1 offered by us has excellent un-flammability and insulation. These heat shrinkable tubes require low shrinking temperature and can shrink very quickly.

Application : They are more suitable for different electric insulation and bonding of cables and connectors. They are widely applied for connecting or end-handing, corrosion-proof of metallic rods or tubes, electric wire, insulating and harness of electric wire and antenna protection.

Material Used : Irradiated and cross-linked thermally stabilized flame retarded polyolefin.

Colors Available : Black, White, Red, Yellow, Green, Clear or as per the client's requirements.

Rated Voltage : 600V

Shrinking Ratio : 2:1

Application :

Dual wall heat shrinkable tubes are flexible and are available with thermoplastic adhesive which melts and flows to seal component. Dual wall heat shrinkable tubes are used for sealing and insulation and protection for wire terminal and connection section.

Features :

• Moisture protection
• Waterproof of harnesses and connectors

Operating Temperature : 125° C

Available Colors : Black or color specified by the client

Shrinking Ratio : 2:1, 3:1, 4:1

Our Anti-track tubes offer excellent resistance to weathering, tracking and erosion. They are ideally suited for outdoor terminations and are specially recommended for some of the worst conditions encountered along seacoasts where the humidity is very high and the atmosphere is saline. Two types are available:

The regular tube, which can be used for all applications up to 36 kV and economical, medium wall variety that is suitable for applications up to 11kV. The tubes red in color and can be coated at the ends with red anti-tracking mastic, as per customer's choice.

Tough, flexible, general purpose Flame Retardant Heat Shrinkable Tubing 3:1 is resistant to common fluids and solvents. Flame retardant heat shrinkable tubing have a high dielectric strength and are made using the unique blend of chemical, electrical and physical properties.

Application : Electrical insulation, cable bundling, strain relief, color coding and identification of wires, pipes, cables and electrical and electronic components.

Material Used : Irradiated, cross-linked, thermally stabilized flame retarded polyolefin.

Colors Available : Black, Red, White, Yellow, Green, Clear or as demanded by the client.

Shrinking Ratio : 3:1

Flammability : UL VW-1

Rated Voltage : 600V

Application :

Especially Suitable for applications requiring high temperature performance, outstanding abrasion resistance and cut-through resistance, or superiors chemical and solvent properties. Provides electrical insulation and strain relief of multipin connectors and solder joints. Ideal for applications that require dense packing of components or visual inspection of covered components.


Features & Benefits

Flame-retardant,
Clear
Thin wall
Semi-rigid
Excellent oil & chemical resistance

Application:

Specially designed for use on industry standard metal pipes to provide protection for automotive metal pipes and fuel lines. This product is positioned on straight pipe lengths prior to the second end-nut fitting. This product can effectively protect the automotive metal pipes and fuel lines against any kinds of damages caused by friction, corrosion, and improve the safety of automotive.

Features:

Very flexible even at low temperatures

Good oil resistance
Meets: SAE-AMS-DTL-23053
Operating temperature range:-40-125C
Minimum full recovery temperature:110C

Feature And Benefits

• Follows any route taken by cable.
• Ensures cable to be led out at any point.
• Durable, reusable, economical with retained spiral strength. • Made of low - density polyethylene.

Application :

Silicone fiberglass sleeving, woven as sleeving by non-alkali fiberglass and coated with silicone in high temperature. It has excellent dielectricity, automatic quench and softness, widely used in the insulation protection of internal line cluster in H&N machinery, household electrical appliances, electroheat device, special illuminations, TV set and electric instrument.

The fusion splice protection sleeves offered by us have the following features :

• Designed to restore complete environmental and mechanical integrity of coating.
• Hot melt adhesive tube made from polyolefin ethyl vinyl acetate copolymer bonds both to the fiber and heat shrinkable outer tube to effectively encapsulate fusion splice.
• Strength member is made from "Full hard" stainless steel of 316 grade. This helps in avoiding rupturing during shrinking, resistance to corrosion.
• Heat shocks resistant.
• No cracking dripping or flowing.
• High performance, exceeds industry standards with satisfied customers.

Medium walled Polyolefin tubings are ideal for the protection of cable joints and terminations in low voltage power applications. These tubings are excellent product for sealing & insulating cable splices, connections, terminations & jacket repairs. These tubings are designed to withstand the severe mechanical requirements of U. R. D. submersible and direct-buried installations.

Material: Irradiated, cross- linked, thermally stabilized flame retarded polyolefin

Available colors: Black or upon requirements

Available with Adhesive coated/lined

Application :

Polyisobutylene (PIB) products with superior amalgamation and ethylene propylene rubber (EPR) products with high temperature resistance ensure Scapa has a suitable general purpose or specialist tape available whatever the demand.

• Jointing, terminating and repairing power cables
• Watertight sealing of telecommunications cables
• Insulating, waterproofing and protecting electrical components
• Electrical insulation of power cable