Paras Lubricants Limited

These are self mixing environmental friendly, semi-synthetic oil.  It is blended from highly refined petroleum base oil with selected additives and a diluent, to provide easy mixing with fuel. It offers thorough lubrication, low carbon deposits and lower emissions. The unique formulation eliminates stratification encountered in petrol-oil mixtures.

• Provides marked improvement to fuel economy.
• Reduces visible smoke.
• Protects engine from wear & corrosion.
• Quick starting.
• Complete combustion.
• Keeps piston skirt clean.
• Prevents carbon deposit build-up which may lead to exhaust port blockages.
• Low ash content.
• Prevents pre-ignition rust and spark plug fouling.
• ENVIRONMENTAL FRIENDLY.

2 stroke air cooled gasoline engines used in scooters, motor cycles, mopeds, three wheelers etc. and small equipment such as sprayers, pumps, generators, agro-implements like pesticide blowers, tillers,  chain saws etc.

To be used in oil-petrol ratio as per engine manufacturer's guidelines.

2T POWER - EXCEEDS API:TC ; 2T SUPREME - JASO: FC specifications.

210 Ltr., 20 Ltr., 5 Ltr.,1 Ltr., 500 ml

These are self mixing environmental friendly, semi-synthetic oil.  It is blended from highly refined petroleum base oil with selected additives and a diluent, to provide easy mixing with fuel. It offers thorough lubrication, low carbon deposits and lower emissions. The unique formulation eliminates stratification encountered in petrol-oil mixtures.

• Provides marked improvement to fuel economy.
• Reduces visible smoke.
• Protects engine from wear & corrosion.
• Quick starting.
• Complete combustion.
• Keeps piston skirt clean.
• Prevents carbon deposit build-up which may lead to exhaust port blockages.
• Low ash content.
• Prevents pre-ignition rust and spark plug fouling.
• ENVIRONMENTAL FRIENDLY.

2 stroke air cooled gasoline engines used in scooters, motor cycles, mopeds, three wheelers etc. and small equipment such as sprayers, pumps, generators, agro-implements like pesticide blowers, tillers,  chain saws etc.

To be used in oil-petrol ratio as per engine manufacturer's guidelines.

2T POWER - EXCEEDS API:TC ; 2T SUPREME - JASO: FC specifications.

210 Ltr. ,20 Ltr., 5 Ltr., 1 Ltr., 500 ml & 40 mll

These premium quality multigrade engine oils are  formulated to meet the special requirements of high performance 4 stroke, two and three wheelers. It provides total engine protection viz. protection from rust, corrosion, high temperature, wear & tear etc.

• Protects the engine, gear box and clutch at high temperature and high speed.
• Optimum viscosity is maintained, to provide effective lubrication.
• Longer oil drain period.
• Reduces maintenance Cost.
• Enhances engine Life.
• Eco-friendly & catalytic converter compatible.

Recommended for all new generation 4 stroke , two wheelers, plying under severe duty conditions like frequent stop & go, dusty environment, variable climatic conditions etc. viz. Hero Honda, Bajaj, TVS, Yamaha, Suzuki, LML, Kinetic etc. and three wheelers also.  

Check / top up engine oil every 2000km or as per vehicle manufacturer’s recommendation.

IS 13656 – 2002 (E-PL4), JASO: MA/API:SJ specifications.

210 Ltr., 50 Ltr., 1 Ltr., 900 ml Pouch.

These premium quality multigrade engine oils are  formulated to meet the special requirements of high performance 4 stroke, two and three wheelers. It provides total engine protection viz. protection from rust, corrosion, high temperature, wear & tear etc.

• Protects the engine, gear box and clutch at high temperature and high speed.
• Optimum viscosity is maintained, to provide effective lubrication.
• Longer oil drain period.
• Reduces maintenance Cost.
• Enhances engine Life.
• Eco-friendly & catalytic converter compatible.

Recommended for all new generation 4 stroke , two wheelers, plying under severe duty conditions like frequent stop & go, dusty environment, variable climatic conditions etc. viz. Hero Honda, Bajaj, TVS, Yamaha, Suzuki, LML, Kinetic etc. and three wheelers also.  

Check / top up engine oil every 2000km or as per vehicle manufacturer’s recommendation.

IS 13656 – 2002 (E-PL4), JASO: MA/API:SJ specifications.

210 Ltr.,50L tr.,900 ml Pouch

It is a super premium multigrade oil for gasoline / diesel engines, meeting API:SJ/CF, performance requirements. It is made from high quality solvent refined base oils and selected additives. Being multigrade oil it has wide ranging features.

• Excellent oxidation stability.
• Super detergency level.
• Added protection against engine deposits, rust, corrosion and wear.
• Quicker engine start & longer battery life.
• Avoids seasonal oil changes.
• Reduced exhaust emission.
• Increased oil drain period and fuel efficiency.
• Lower oil consumption due to lesser tendency of oil thickening.
• Maintains stay-in-grade viscosity throughout over wide range of operating temperature.

Fuel efficient petrol/diesel engine driven cars and utility vehicles, such as MARUTI, ZEN, ESTEEM, SANTRO, ACCENT, HONDA, SUMO, INDICA, TOYOTA, FORD etc.

• Always change filter when changing engine oil.
• Short trips; stop-and-go traffic; excessive dust or dirt-such conditions are very hard for engine oils and may lead to frequent oil changes.

PERFORMANCE LEVEL

IS 13656 -2002 (E-PL4/E-DL3), API: SJ/CF specifications.

210 Ltr., 5 Ltr., 3 Ltr., 1 Ltr., 500 ml

It has been developed to improve viscosity and viscosity Index of engine oil, thus reducing oil consumption & smoke exhaust levels and improving engine compression. It is premium quality mineral oil base product, carefully blended from selected hermavis based additives. The product is most efficient and popular, particularly in extending the life of an old worn out engine and to plan for major overhaul of an engine of a vehicle.

• Good compatibility with complete range of engine oils.
• Helps to retain the original composition of engine oils, even under high stress and high temperature.
• Reduces lubrication breakdowns.
• Acts as detergent and anti-rust additive.

To be added in 5 to 10% by volume in engine oil, depending upon the condition of old engines of  cars, commercial vehicles, stationery engine etc. or as recommend by service centers.

Do not add engine oil saver to the engine oil, in cold/ambient temperature.  Start the engine and heat it for 20 minutes and then add engine oil saver to the engine oil, while the engine is in neutral gear & running condition.

20 Ltr., 400 ml

It is a superior multigrade low ash, heavy duty, eco-friendly gas engine oil, meeting API:SF/CD performance requirements. It is specially developed  for vehicles operating on CNG/LPG with dual fuel kit i.e. suitable for operating on petrol/diesel also.  It if formulated with high viscosity index base oil and specially selected additives.  Due to excellent oxidation and nitration resistance, it extends the oil drain interval, reducing the operating cost.

• Protect against any nitrate, oxide formation.
• Excellent oxidation stability.
• Low ash contents, reduces formation of sludge in the engine.
• Anti-scuffing properties.
• Long drain engine oil.
• Increased fuel efficiency.

• Recommended for all cars, taxi, 3 wheelers and commercial vehicles, running on CNG/LPG.  Also suitable for vehicles/engines as mentioned above, running on petrol/diesel.

• Always change filter when changing engine oil.
• Short trips; stop-and-go traffic; excessive dust or dirt-such conditions are very hard for engine oils and may lead to frequent oil changes.

IS 13656-2002 (E-DL3/E-PL2),US MILITARY, MIL-L-2104C, API:SF/CD specifications.

210 Ltr., 5 Ltr., 3 Ltr., 1 Ltr., 500 ml

It is a super premium multigrade engine oil, meeting API:CI -4/SL plus MB 228.3 performance requirements; specially developed for new generation heavy duty diesel engine driven HCVs.  It is made from high quality solvent refined base oils and selected additives.  Being multigrade oil, it has wide ranging features.

• Optimum viscosity is maintained, to provide effective lubrication.
• Special dispersant/detergent additives, provides excellent piston cleanliness and
  reduce exhaust emission.
• Good anticorrosion, antirust, antioxidation and antiwear properties.
• Quicker engine start & longer battery life.
• Increased oil drain period upto 45000 kms on highway, under ideal conditions.
• Increased fuel efficiency.
• Complies with EURO II and EURO III technologies.

•  Mixed fleets of both new generation gasoline and diesel engines.
• Constructions, marine, mining and heavy duty stationery engines.
• Engines incorporating exhaust gas recirculation (EGR).
• Turbo charged diesel engines.

• Always change filter when changing engine oil.
• Use genuine oil filter and replace at 9000 km for city service / hilly areas & 18000km for highway service. Also top-up with PALCO HITECH 15W40 engine oil.
• Short trips; stop-and-go traffic; excessive dust or dirt-such conditions are very hard for engine oils and may lead to frequent oil changes.

IS 13656-2002 (E-DL5/ E-PL4), API:CI-4/SL plus MB 228.3, MAN3275, VOLVO VDS-3, ACEA E7/E5 specifications.

210 Ltr., 50 Ltr., 20 Ltr., 5 Ltr., 1 Ltr.

It is a high quality performance multigrade engine oil, meeting API:SC/CC performance requirements, formulated from selected base oils and additives, to suit petrol and diesel engines.

• Viscosity suitable for wide range temperatures and different engines.
• High performance features, keeps engine clean and minimizes maintenance cost.
• Good anticorrosive, antiwear, antirust and antioxidation properties.
• Reduced exhaust emission due to high detergency.
• Increased oil drain period due to good dispersant properties.
• Lower oil consumption and increased fuel efficiency.
• Quicker engine start and longer battery life.

• Petrol engines, naturally aspirated and supercharged diesel engines, power generating sets etc, operating under moderate duty conditions.

• Always change filter when changing engine oil.
• Short trips; stop-and-go traffic; excessive dust or dirt-such conditions are very hard for engine oils and may lead to frequent oil changes.

IS 13656-2002 (E-PL1/E-DL1), US MILITARY MIL-L-2104B,  API:SC/CC specifications.

210 Ltr., 50 Ltr., 20 Ltr., 10 Ltr., 7.5 Ltr., 5 Ltr., 1 Ltr., 500 ml, 1 Ltr. Pouch, 500 ml Pouch

It is a high quality performance multigrade engine oil, meeting API:SC/CC performance requirements, formulated from selected base oils and additives, to suit petrol and diesel engines.

PHB 20W50 (GUGLEE) is fortified with excellent nitration resistance properties to suit engines operating with dual fuel kit i.e. on CNG / LPG also.

• Excellent oxidation stability.
• Protects against any nitrate formation.
• Low ash contents reduces formation of sludge in the engine.
• Suitable for all seasons.
• Quicker engine start & longer battery life.
• Increased fuel efficiency.

Recommended for Cars, Trucks, Auto Rickshaws and commercial vehicles with CNG/ LPG engines, operating under moderate duty conditions. Also suitable for petrol / diesel engines operating with dual fuel kit.

• Always change filter when changing engine oil.
• Short trips; stop-and-go traffic;  excessive dust or dirt-such conditions are very hard for engine oils and may lead to frequent oil changes.

IS 13656-2002 (E-PL1/E-DL1), US MILITARY MIL-L-2104B,  API:SC/CC specifications.

210 Ltr.,5 Ltr.,3 Ltr.,1 Ltr.,500 ml

These oils are high quality performance monograde engine oils, meeting API:SC/CC performance requirements, formulated from selected base oils and additives, to suit petrol and diesel engines.

• PHB -40 & 50 oil viscosities are suitable for new /  running and old engines respectively.
• Good anticorrosion, antirust, antioxidation and antiwear properties.
• Reduced exhaust emission due to high detergency.
• Increased oil drain period interval due to good dispersant properties.
• Lower oil consumption and increased fuel efficiency.
• High performance features, keeps engine clean and minimizes maintenance cost.

Petrol engines, naturally aspirated and supercharged diesel engines, power generating sets etc., operating under moderate duty conditions.

• Always change filter when changing engine oil.
• Short trips; stop-and-go traffic; extreme heat or cold; excessive dust or dirt-such conditions are very hard for engine oils and may lead to frequent oil changes.

IS 13656-2002 (E-PL1/E-DL1), US MILITARY MIL-L-2104B and API:SC/CC specifications.

PHB 50 -210Ltr.,3.5Ltr.,

PHB 40 (BONUS) -210Ltr.,20Ltr.,5Ltr.,1Ltr.,500ml

These oils are high quality performance multigrade engine oils, meeting API:CF performance requirements, formulated from selected base oils and additives, to suit diesel engines.

• Optimum viscosity is maintained to provide effective lubrication.
• Special dispersant / detergent additives provides excellent piston cleanliness and
  reduce exhaust emission.
• Special antioxidant improves oil stability and prevents decomposition under severe
  operating conditions.
• Lower oil consumption and increased fuel efficiency.
• Quicker engine start and longer battery life.
• Cost effective due to long oil drain period and reduced engine maintenance.
• Suitable for all seasons.

• Recommended for lubrication of all 4-stroke diesel engines / turbo charged engines of heavy vehicles and heavy earth moving machinery and power generating sets, operating under severe duty conditions.

• Always change filter when changing engine oil.
• Short trips; stop-and-go traffic; excessive dust or dirt-such conditions are very hard for engine oils and may lead to frequent oil changes.

IS13656-2002(E-DL3), API:CF and exceeds US MILITARY MIL-L-2104C, MACK T-7 specifications.

PHD 15W40 - 210 Ltr.
PHD 20W40 (COMMANDER) - 210 Ltr., 50 Ltr., 20 Ltr., 10 Ltr., 5 Ltr., 1 Ltr.

These oils are high quality performance monograde engine oils, meeting API:CD performance requirements, formulated from selected base oils and additives, to suit diesel engines.

• PHD-30,40 & 50 oil viscosities are suitable for new, running and old engines respectively.
• High oxidation stability.
• Protects engine against, deposits, rust, corrosion and wear.
• Reduces formation of sludge in the engine.
• High detergency level, thus cleaner engine.
• Anti-scuffing properties.
• Increased oil drain period.

• Recommended for lubrication of all turbo- charged 4-stroke diesel engines, earth moving equipment / power generating sets operating under severe duty conditions.

• Always change filter when changing engine oil.
• Short trips; stop-and-go traffic;  extreme heat or cold, excessive dust or dirt-such conditions are very hard for engine oils and may lead to frequent oil changes.

• IS 13656-2002(E-DL3),US MILITARY MIL-L-2104C, API:CD & MACK T-7 specifications.

It is a high quality, heavy duty monograde engine oil, meeting API:CF/SF performance requirements. It is blended from selected highly  refined base oils and contain an additive package with antioxidant, antiwear, anticorrosion, detergent, dispersant and antifoam agents; to suit petrol and diesel engines.  It  can combat corrosive wear, that may result by using high sulphur fuels; due to its good built-in  alkaline reserves.

• High detergency level, thus cleaner engine.
• Good anticorrosion, antirust and antioxidation properties.
• Reduced exhaust emission.
• Increased oil drain period.
• Lower oil consumption.
• Increased fuel efficiency.
• Provides better control over engine wear and deposits. Hence keeps engine in better condition & reduces engine maintenance.

• Turbo charged diesel engines, naturally aspirated diesel engines & gasoline engines, operating with high ring zone temperatures, under severe duty conditions.

• Always change filter when changing engine oil.
• Short trips; stop-and-go traffic; extreme heat or cold; excessive dust or dirt-such conditions are very hard for engine oils and may lead to frequent oil changes.

• IS 13656 -2002 (E-DL3 / E-PL2), MIL-L-2104D and API:CF/SF & MACK T-8A specifications.

210Ltr.,50Ltr.,20Ltr.,10Ltr.,5Ltr.,1Ltr.

It is a high quality, heavy duty multigrade engine oil, meeting API:CF/SF performance requirements. It is blended from selected highly  refined base oils and contain an additive package with antioxidant, antiwear, anticorrosion, detergent, dispersant and antifoam agents; to suit petrol and diesel engines.  It  can combat corrosive wear, that may result by using high sulphur fuels; due to its good built-in  alkaline reserves.

• Optimum viscosity is maintained, to provide effective lubrication.
• Special dispersant/detergent additives, provides excellent piston cleanliness and
  reduce exhaust emission.
• Special antioxidant improves oil stability and prevents decomposition under severe
  operating conditions.
• Lower oil consumption and increased fuel efficiency.
• Quicker engine start and longer battery life.
• Cost effective due to long oil drain period and reduced engine maintenance.
• Suitable for all seasons.

• Turbo charged diesel engines, naturally aspirated diesel engines & gasoline engines, operating with high ring zone temperatures, under severe duty conditions.

• Always change filter when changing engine oil.
• Short trips; stop-and-go traffic; excessive dust or dirt-such conditions are very hard for engine oils and may lead to frequent oil changes.

• IS 13656 -2002 (E-DL3 / E-PL2), MIL-L-2104D and API: CF/SF & MACK T-8A specifications.

210 Ltr., 50 Ltr., 20 Ltr., 5 Ltr., 1 Ltr.

It is a high quality performance multigrade engine oil, meeting API:CF-4/SJ plus MB 228.1 performance requirements, formulated from selected base oils and additives, to suit petrol and diesel engines, operating under severe duty conditions.

• Provides excellent protection against high temperature, engine deposits, ring groove carbon, piston and bearing lacquer, top deck and crankcase sludge.
• High viscosity index exhibits lower temp. fluidity and high temp. film strength under
  severe conditions.
• Very high oxidation stability protects against formation of gums & varnish and resists oil thickening and filter plugging, for very long drain period.
• Minimum toxicity reduce aromatic and sulphur content.
• Overall outstanding performance accounts to, fuel saving and prolonged engine life.

• Commercial road transport and off-highway vehicles applications.
• Power shift transmissions and mobile hydraulic systems.
• New generation automotive vehicles.

• Always change filter when changing engine oil.
• Short trips; stop-and-go traffic; excessive dust or dirt-such conditions are very hard for engine oils and may lead to frequent oil changes.

IS 13656-2002 (E-DL5/ E-PL4), CCMC D5, US MILITARY MIL-L-2104 E, API:CF-4/SJ plus MB 228.1, ACEA E2/B3, VOLVO VDS & C4 of Detroit Allison specifications.

210 Ltr., 50 Ltr., 20 Ltr., 15 Ltr., 10 Ltr., 5 Ltr., 4 Ltr., 1 Ltr.

It is a high performance monograde (SAE-40) engine oil, meeting API:SC/CC performance requirements.  It is specially formulated from petroleum mineral oil, fortified with additives, to meet antiwear and foam inhibitor requirements of petrol/diesel pump sets used for agriculture.

• High oxidation stability.
• Protects engine against rust, corrosion and wear.
• Cleaner engine.
• Longer engine life.
• Reduced oil top up.
• Economical.

Recommended for stationary  petrol/diesel engines, equipped with agriculture pump sets/ power generator sets, operating under moderate duty condition.

Extreme heat or cold, excessive dust or dirt-such conditions are very hard for engine oils and may lead to frequent oil changes.

IS 13656-2002 (E-PL1/E-DL1), US MILITARY MIL-L-2104B and API:SC/CC specifications.

210 Ltr., 5 Ltr., 4 Ltr., 3.5 Ltr., 1 Ltr.

It is a multigrade engine oil, meeting API:CF performance requirements; specially formulated after extensive research & development work for use in tractor engines, experiencing greater torque and load.

• High viscosity index of oil enables, operation of engine in extreme temperatures.
• Easy cranking and quick starting at low temperatures.
• Good anticorrosion, antirust, antioxidation and antiwear properties.
• Reduces oil consumption and keeps engine clean from sludge.
• Avoids seasonal oil changes.
• Increased oil drain interval and fuel efficiency.

Diesel tractors from Escorts, FORD, HMT, Hindustan, Eicher, Swaraj, Mahindra, Massey Ferguson makes etc. and earth movers, operating under severe duty conditions in field and on roads viz heat, dust, cold, heavy loading etc.

Always change oil & air filter when changing engine oil.

IS 13656-2002 (E-DL3),US MILITARY MIL-L-2104C, API:CF and exceeds MACK T-7 specifications.

210 Ltr., 20 Ltr., 7.5 Ltr., 5 Ltr., 1 Ltr.