Paras Lubricants Limited

These are multifunctional long life lithium soap based greases, formulated with specially selected raw material for optimum lubrication, meeting industrial plant and automotive requirements including ball and roller bearing and electric motors' bearings lubrication.

• High drop point.
• Excellent thermal and structural stability.
• Optimum lubrication under even adverse mechanical conditions.
• Good surface adhesion.
• Gives excellent protection against rust, corrosion and water wash out.

• Plain and anti-friction bearings of cars, commercial Vehicles etc.
• Heavy duty ball and roller bearings of steel rolling mills, textile mills, papers mills, sugar mills etc.
• Universal joints and spline shafts.
• Suitable for bearings operating at temperature upto 130ºC.

These greases are compatible only with lithium base grease. Sealed bearings should be thoroughly cleaned before using greases described in this product bulletin.

IS 7623 - 1993, AP2:NLGI 2 & AP3: NLGI 3 specifications.

AP-2 : 180 kg,18 kg

AP-3: 180 kg, 18 kg, 10 kg, 5 kg, 3kg, 2 kg, 1 kg, 500 gms, 200 gms (Pouch)

It is made from calcium soap, refined & filtered mineral lubricating oils, suitable tackifier etc. The grease is smooth, homogeneous, free from objectionable odour and visible impurities and abrasive of deleterious particles.

• Excellent water resistance and good dispensing properties.
• Adhesive properties provide coating to exposed parts.
• Easily pumpable.

• Automotive chassis parts including suspension and steering system.
• Chain drives of farm equipment.

It is not recommended for high temperature applications.

IS 506-1993 specifications.

180 kg, 18 kg, 2 kg, 1 kg, 500 gms

It is a premium quality lithium soap based all purpose grease, fortified with EP additives.  It is specially formulated to enhance re-lubrication interval, upto 33,000 km under ideal road condition. It has good thermal, chemical and structural stability including water wash out properties. It provides excellent lubrication and protection to the bearing parts over a wide temperature & pressure range, under normal as well as adverse mechanical conditions.

• Lubricates and protects the components for a longer period.
• Excellent structural stability.
• High load carrying capacity.
• Antirust and corrosion capabilities
• Superior tackiness
• Optimum lubrication, even under adverse mechanical conditions.

• Lubrication of plain as well as anti-friction bearings in automotive, earth moving equipment, mining equipment and general industrial machineries.
• Heavy duty ball and roller bearings of steel rolling mills, operating under adverse conditions.
• Universal joints and spline shafts working under heavy torque or with acute transmission angles.
• Suitable for bearings operating at temperature upto 150ºC.

These greases are compatible only with lithium base grease. Sealed bearings should be thoroughly cleaned before using greases described in this product bulletin.

IS 7623 - 1993, NLGI- 3 specifications.

180 kg, 18 kg, 5 kg, 3 kg, 2 kg,1 kg, 500 gm

It is  made from sodium soap, refined & filtered mineral lubricating oil and other additives. The grease is homogeneous and of fibrous texture, free from objectionable odour and visible impurities. No fillers are used in the composition.

• Good structural stability.
• Withstanding effectively the excessive churning.
• Ensure protection to lubricated parts against heat, rust & corrosion.

Automotive wheel bearings, universal joints, axle journal boxes etc. operating at temperature upto 130ºC and not exposed to moisture.

IS 10647-1983 specifications.

180 kg, 18 kg, 2 kg, 1 kg, 500 gms, 200 gms (Pouch)