These are multifunctional long life lithium soap based greases, formulated with specially selected raw material for optimum lubrication, meeting industrial plant and automotive requirements including ball and roller bearing and electric motors' bearings lubrication.

• High drop point.
• Excellent thermal and structural stability.
• Optimum lubrication under even adverse mechanical conditions.
• Good surface adhesion.
• Gives excellent protection against rust, corrosion and water wash out.

• Plain and anti-friction bearings of cars, commercial Vehicles etc.
• Heavy duty ball and roller bearings of steel rolling mills, textile mills, papers mills, sugar mills etc.
• Universal joints and spline shafts.
• Suitable for bearings operating at temperature upto 130ºC.

These greases are compatible only with lithium base grease. Sealed bearings should be thoroughly cleaned before using greases described in this product bulletin.

IS 7623 - 1993, AP2:NLGI 2 & AP3: NLGI 3 specifications.

AP-2 : 180 kg,18 kg

AP-3: 180 kg, 18 kg, 10 kg, 5 kg, 3kg, 2 kg, 1 kg, 500 gms, 200 gms (Pouch)

It is a premium quality lithium soap based all purpose grease, fortified with EP additives.  It is specially formulated to enhance re-lubrication interval, upto 33,000 km under ideal road condition. It has good thermal, chemical and structural stability including water wash out properties. It provides excellent lubrication and protection to the bearing parts over a wide temperature & pressure range, under normal as well as adverse mechanical conditions.

• Lubricates and protects the components for a longer period.
• Excellent structural stability.
• High load carrying capacity.
• Antirust and corrosion capabilities
• Superior tackiness
• Optimum lubrication, even under adverse mechanical conditions.

• Lubrication of plain as well as anti-friction bearings in automotive, earth moving equipment, mining equipment and general industrial machineries.
• Heavy duty ball and roller bearings of steel rolling mills, operating under adverse conditions.
• Universal joints and spline shafts working under heavy torque or with acute transmission angles.
• Suitable for bearings operating at temperature upto 150ºC.

These greases are compatible only with lithium base grease. Sealed bearings should be thoroughly cleaned before using greases described in this product bulletin.

IS 7623 - 1993, NLGI- 3 specifications.

180 kg, 18 kg, 5 kg, 3 kg, 2 kg,1 kg, 500 gm

This grease is multipurpose lithium base grease, compounded with extreme pressure (EP) additives as well as finely dispersed molybdenum disulphide (MoS2), which is very effective solid lubricant with extremely good anti-scuffing characteristics. This grease is also fortified with corrosion and oxidation inhibitors and additives that provide good film strength under medium-to-high loads.

PAL LIMOX grease provide good protection to contacting surfaces against rust, corrosion and wear as well as resistance to water wash-out. This grease also has an application in sliding motions where the prevention of scuffing is desirable and may be used in dry or moist conditions. This grease also possess good mechanical stability, load carrying properties, resistance to shock loads and overcomes boundary lubrication conditions, thus enhancing component life and increasing re-lubrication intervals.

Recommended for lubrication of heavily loaded slow/medium speed bearings of all types and is particularly useful in preventing bearing damage caused by excessive vibration or shock loads. When exposed to extreme operating conditions, particularly where contacting surfaces are exposed to very heavy pressure and shock loads and for continuous service up to 130ºC this grease helps prevent the depletion of normal grease lubrication by a residual coating on the metal surface with molybdenum disulphide to give 'dry' or 'solid' lubrication.

It is not recommended for use in small, high speed ball and roller bearings.

These greases are compatible only with lithium base grease. Sealed bearings should be thoroughly cleaned before using grease described in this product bulletin.

Health: This product is not expected to produce adverse effects on health when used for the intended application. However prolonged or repeated skin contact with this oil is injurious to health. Clean properly with soap and water.
Environment: Lubricant should not be disposed in drain, soil and water.  To be disposed through licensed/authorized collector of lubricants only.

180Kg,18Kg

It is  made from sodium soap, refined & filtered mineral lubricating oil and other additives. The grease is homogeneous and of fibrous texture, free from objectionable odour and visible impurities. No fillers are used in the composition.

• Good structural stability.
• Withstanding effectively the excessive churning.
• Ensure protection to lubricated parts against heat, rust & corrosion.

Automotive wheel bearings, universal joints, axle journal boxes etc. operating at temperature upto 130ºC and not exposed to moisture.

IS 10647-1983 specifications.

180 kg, 18 kg, 2 kg, 1 kg, 500 gms, 200 gms (Pouch)

GENERAL PURPOSE GREASE

This grease is calcium-based general purpose grease containing highly-refined mineral oils and suitable tackifier. It is smooth, homogeneous, and free from objectionable odour, visible impurities and abrasive or deleterious particles. 

Recommended for the lubrication of plain bearings operating under slow to medium-speed, medium-load and temperature up to 70°C. Due to good water repellency characteristics, it is also recommended for the lubrication of the bearings and packing of water pumps immersing equipments. Also recommended for application to exposed components where high temperature is not encountered.

Health: This product is not expected to produce adverse effects on health when used for the intended application. However prolonged or repeated skin contact with this oil is injurious to health. Clean properly with soap and water.
Environment: Lubricant should not be disposed in drain, soil and water.  To be disposed through licensed/authorized collector of lubricants only.

180Kg,18Kg

PAL NSG is non-soap base grease having smooth structure and excellent thermal stability for lubrication of both plain and antifriction bearings under increasing temperatures.

PAL MDG is multipurpose non-soap base grease, compounded with finely dispersed molybdenum disulphide (MoS2), which is very effective solid lubricant with extremely good anti-scuffing characteristics.

PAL NSG&PAL MDG greases are engineered to resist rust, oxidation and corrosion while reducing wear. In addition, these greases have excellent resistance to water washout and do not get affected by mild acids and alkalies. These greases meet IS 12790-1999 grade3, U.S.Steel No. 372 requirement and IPSS:1-09-008 specifications.

PAL NSG grease is recommended for lubrication of plain and antifriction bearings in all areas of industrial, automotive, farm machinery and other off-road applications, operating continuously at high temperature up to 250°C.

PAL MDG grease are especially recommended for heavy duty multi-purpose applications including ball joints, king pins, ball and roller bearings, sleeve bearings, pillow blocks, oven conveyors, sugar cane cutters, sliding surfaces, cranes, drag lines, wheel bearings etc.

These greases gives optimum performance when used in applications up to 135°C with normal re-greasing, and up to 250°C with frequent re-greasing, making it suitable for use in a wide range of high temperature applications.

These greases are not compatible with other greases. Former grease must be completely removed and cleaned from bearings before using greases described in this product bulletin.

Health: This product is not expected to produce adverse effects on health when used for the intended application. However prolonged or repeated skin contact with this oil is injurious to health. Clean properly with soap and water.
Environment: Lubricant should not be disposed in drain, soil and water.  To be disposed through licensed/authorized collector of lubricants only.

180Kg,18Kg