Paras Lubricants Limited

HIGH TEMPERATURE GREASES WITH MoS₂

These greases are multipurpose non-soap base grease made from a heat resistant bentonite thickener, compounded with EP additives and finely dispersed molybdenum disulphide (MoS2), which is very effective solid lubricant with extremely good anti-scuffing characteristics. They are engineered to resist rust, oxidation and corrosion while reducing wear besides excellent ability to withstand high temperature and severe shock load conditions. In addition, these greases have excellent resistance to water washout and do not get affected by mild acids and alkalies.

Recommended for lubrication in all areas of industrial, automotive, farm machinery and other off-road applications These greases meet IS 12790-1999 grade3, U.S.Steel No.372 requirement and IPSS:1-09-008 specifications. These greases are widely used for the lubrication of machine elements, plain bearings and anti-friction bearings operating at high temperatures between 120°C to 250°C. These greases gives optimum performance when used in applications up to 135°C with normal re-greasing, and up to 250°C with frequent re-greasing, making it suitable for use in a wide range of high temperature applications.

These greases are not compatible with other greases. Former grease must be completely removed and cleaned from bearings before using greases described in this product bulletin

Health: This product is not expected to produce adverse effects on health when used for the intended application. However prolonged or repeated skin contact with this oil is injurious to health. Clean properly with soap and water.
Environment: Lubricant should not be disposed in drain, soil and water.  To be disposed through licensed/authorized collector of lubricants only.

180Kg,18Kg,5kg,1kg

These greases are formulated from a special blend of high viscosity solvent refined base oil, thickened with bentonite clay. They have smooth structure, ability to retain their consistency under increasing temperatures; offer excellent resistance to chemicals such as mild acids and alkalies besides having good water repellency characteristics.

These greases meet IS 12790-1999 grade 3, U.S.Steel No.372 requirements and IPSS:1-09-008 specifications. These greases are suitable for the lubrication of machine elements, plain bearings and anti-friction bearings operating at high temperatures between 120°C to 250°C.

Recommended for use in industrial ball and roller bearings, kiln car wheel bearings, furnace door bearings, heat exchange motor bearings, oven conveyor bearings and other applications where extremely high temperatures are encountered. These greases gives optimum performance when used in applications up to 135°C with normal re-greasing, and up to 250°C with frequent re-greasing, making it suitable for use in a wide range of high temperature applications.

These greases are not compatible with soap type greases. Bearings must be thoroughly cleaned before changing over to Bentonite type greases.

Health: This product is not expected to produce adverse effects on health when used for the intended application. However prolonged or repeated skin contact with this oil is injurious to health. Clean properly with soap and water.

Environment: Lubricant should not be disposed in drain, soil and water.  To be disposed through licensed/authorized collector of lubricants only.

180Kg,18Kg,5kg,1kg

This is premium quality lithium soap based multifunctional synthetic grease having EP properties and wide operating temperature range of -40°C to170°C; making it an ideal choice for aircraft and other applications where low temperatures are encountered. It demonstrates excellent resistance to extreme weather conditions and chemicals such as mild acids, alkalis and alcohols etc. It has good thermal, chemical, and structural stability including water repellency characteristics.

This grease is recommended for lubrication of all types of bearings, operating under very high speed and high temperature conditions. It has very low starting torque and as such it is an ideal choice for home appliances like portable air cooler, washing machines etc. It is also suitable for electric motor of "H" insulation, water turbines, steam joints and conveyor system. It is an outstanding lubricant for plastic, rubber and glass materials, which normally deteriorates under prolonged contact with petroleum lubricants and greases. Due to excellent steam and moisture resistance properties it gives better service than other conventional lubricants in dyeing and textile finishing units.

It is not compatible with other greases and as such, this should be used only after complete removal of old grease of the bearings

Health: This product is not expected to produce adverse effects on health when used for the intended application. However prolonged or repeated skin contact with this oil is injurious to health. Clean properly with soap and water.

Environment: Lubricant should not be disposed in drain, soil and water.  To be disposed through licensed/authorized collector of lubricants only.

180Kg,18Kg,5kg,1kg

This is a blend of Polytetrafluoroethylene (PTFE) fluorocarbon particles in specially prepared lithium-based, water-repellent grease. This grease is also fortified with rust, corrosion and oxidation inhibitors and additives that provide good film strength, better adhesion at high speed, under medium-to-high loads. The plating of PTFE applied to the mating surfaces under working conditions enhances the component’s life and increases re-lubrication intervals.

This grease has an application in a continuous operating temperature up to 140°C and in majority of situations specifying lubrication, especially in high pressure, water and salt-water conditions including wire ropes. Use of this grease on a continuous basis, will prevent seizing and pitting on the friction surfaces
 
Recommended for all general purpose application in automotive and Industrial segments viz. machinery, tools, overhead garage door, channels, fan, motors, slides, gears etc. This grease has good corrosion prevention characteristics and as such finds application in marine segment also viz. cables, couplings, gears, hitches, winches etc.
 
These greases are compatible only with lithium base grease. Sealed bearings should be thoroughly cleaned before using grease described in this product bulletin.

Health: This product is not expected to produce adverse effects on health when used for the intended application. However prolonged or repeated skin contact with this oil is injurious to health. Clean properly with soap and water.
Environment: Lubricant should not be disposed in drain, soil and water.  To be disposed through licensed/authorized collector of lubricants only.

180Kg,18Kg,5kg,1kg

Emulsifier Package for Soluble Metal Working Fluid

PALSIFIER 600 metalworking package is used to formulate soluble oil metalworking fluid concentrates that form stable macro-emulsions when diluted with water (upto 600 ppm hard water) at the manufacturing site, for metal removal, metal forming, and other water-extendable lubricant applications. This product is balanced combinations of emulsifier chemistry designed to control acidity, foam, mist, metal staining, friction, tool breakage, odor, oxidation, corrosion inhibition, and supplemental lubricity to the finished fluid. Basic metalworking fluid concentrates can be created by dilution of the package in the appropriate percentage of Solvent Neutral/Base oil.