We manufacture and supply highly durable and reliable elastomeric cables. The cables are made from top grade raw material for longer durability, better efficiency and trouble free performance. Available in various specifications, we provide these products in different varieties such as:

• Elastomeric Trailing Cables
  
• Elastomeric Mining/Drilling Cables up to 11KV
  
• Elastomeric Multicore/Control Cables
  
• Silicon Cables with Fiber Glass Braided & Silicon Varnished
  
• Furnace Cables
  
• Wind Mill Turbine Cables
  
• Blasting Cables
  
• Fire Survival Cables
  
• Fastooning Cables Up to 11KV
  
• Flat Cables
  
• Oceanographic Cables
  
• Plaiable Armored Rubber Cables
  

Besides being reliable and durable, the welding cables we offer are manufactured using high quality materials. We conform to various quality standards to ensure fault free operation and better efficiency. The cables are available in various specification and we also offer customized solutions as per the requirement of the clients.

General Information: During welding, heating and cutting operations with oxygen acetylene flame, the gases are transferred through different storages and cylinders from rubber hose. Therefore the hose should be:

• Strong
  
• Durable
  
• Non-porous
  

Hence, PRIMA hoses are the best as these are made from laboratory tested materials to ensure the right kind ode ruggedness for longer life.

Construction: A good quality hose should have the following features,

• Evenly braided synthetic rubberized yarn
  
• Seamless and uniform thickness
  
• Smooth in-bore concentric
  
• Free from porosity or air blisters
  
• For transferring oxygen, blue hose is used (as per IS 447:1988), and for acetylene, red hose is used but both are of same grade and construction
  

Salient Features: Besides being rugged in design and safety, PRIMA hose deliver stable pressure in spite of changes in rate of flow, temperature and other conditions. It strictly complies to IS 447:1988 and carefully tested for bursting pressure, tensile strength, elongation, adhesive strength test etc.

The nozzle missing cutters we manufacture are robust in nature but are relatively light in weight. The cutters are made from premium quality material to ensure that they are able to withstand rough and tough usage. They offer high efficiency and are used for gauging by suitable nozzle.

We provide superior quality gas pressure regulator which are widely used in various industrial sector for welding, cutting, heating and brazing activities. The pressure regulators are available for transferring all major types of gases like:

• Oxygen
  
• Acetylene
  
• Argon
  
• Nitrogen
  
• Hydrogen
  
• Carbon di-oxide
  

Made from nonferrous metal alloy, they are designed for safe and comfortable welding and provide effective connection to the holder. It is used for welding in shipbuilding or welding in an enclosed vessel, they are available in 3 different ranges:

• 600 Amp.
  
• 400 Amp.
  
• 200 Amp.

Semi-Insulated Electrode Holder Type-B

Designed for safe and comfortable welding, it is sturdy and insulated with low flammability material to prevent accidental contact with the life of the holder. It has provisions for alternative positions to hold electrodes in order to avoid the necessity to bend the electrodes when welding in different positions. It used in open areas in construction, fabrication, dock yard and floor shop etc. It is available in:

• 600 Amp
  
• 400 Amp
  
• 200 Amp
  

Some salient features of our Semi-Insulated Electrode Holder are:

• Insulation resistance test is measured using a DC voltage of 500 volts
  
• High voltage test is measured using 1000 volts and 2000 volts for Type-A and Type-B Holders respectively
  
• Temperature rise test is carried out for 2 Hrs as per IS: 2641-89 clause 5.3.3
  
• Test for flammability and resistance to heat is carried out as per IS:2641-89 clause 5.3.7
  
• Impact test by vertical fall and lateral Impact test is carried out as per IS:2641 -89 clause 5.3.6

Our company manufactures products for the safety of the welders that include head screen and hand screen. These special products are supported for hands and the head to give maximum protection to the eyes, ears, face, neck and part of the top of the head of the user during welding and cutting processes.

We manufacture and supply strong built earthing clamps made of steel. These are plated for corrosion resistance and robustness. These steel clamps are capable of maintaining efficient electrical and mechanical contact to avoid any disturbance in normal service. It crocodile design type is preferable in minimum the risk of damage to the cable due to flexing. Suitably used for heavy cables, these clamps are available in the preferred rated current of:

• 200 Amp
  
• 400 Amp
  
• 600 Amp
  

Our company offers a wide range of pug cutting machines that are known for high performance and durability. These cutting machines are suitable for cutting ferrous metal sheets and plates in straight direction. Available with the cutting capacity of approximately 0-300mm thick mild steel, it can perform Bevel Cutting 75mm thick up to 45 degree either side of vertical.

Technical Specifications:

• Cutting speed: 190-830 mm/with 220 volts AC, 1 phase , 50 Hz
  
• Range: 1/2 HP electric power motor with rotary resistant control
  
• Cutter PMC-3: Vertical Adjustment 70mm Injector type-Horizontal adjustment 90mm. Gas Hose connections 1/4" BSH LH for fuel gas & RH for oxygen
  
• Standard Accessories: A-16 Cutting Nozzle (1/16"), A-12. Cutting Nozzle (3/64"), 9 Mtrs, 3-core cable, hose nut spanner & head nut spanner

We also supply the pug cutting machine in nozzle mixing head w/o injector.

We provide superior quality range of leather gauntlets gloves to our clients. These are made from soft smooth, pliable, flawless and loose fibres chrome tanned leather. These are used by workers on shop floor while handling moderately hot, sharp-edged or rough materials during gas or electric welding or cutting works.

Specifications:

• Available in Small 300mm (12")
  
• Medium: 350mm (14")
  
• Large: 400mm (16")
  
• Extra Large: 450mm (18")

Our company offers advance technology based gouging torches that are used to gouge, crompter, grove, cut, bevel, flash off various metals like aluminium, copper, brass, steel, cast iron. These are very useful for foundries, shipyards, penstock pile and all structural fabricators, chemical and petroleum complexes.

Various models of our gouging torches are available in following sizes:

• PP-6 600: 6mm & 9mm
  
• PP-12 1200: 6, 9 & 12mm
  
• PP-20 2000: 9, 12 & 15mm

Process to Use:

• The striking of an ARC between the metal work piece and the carbon electrode
  
• Meting by the ARC
  
• Removal of the melt on metal by compressed air Jets, flowing parallel to the electrode from the torch

Special Features:

• Special grade copper/copper alloy is used end to end for high conductivity of current
  
• For longer live of the torch, heat resistant insulators are provided
  
• Triple air nozzles swivel head used for better and fast unwanted metal removal
  
• To prevent arcing, high tension lever allowing firm grip of the electrode is used
  
• Insulated dual purpose mono cable for compressed air and electrical current
  
• 360° Free revolving movement between torch and mono cable
  
• Results minimum wrist stress to welder and better fatigue free working

We offer our clients a superior quality range of electrode drying and carry oven. These ensure longer life of electrodes and specially suitable for re-drying electrodes having excess moisture. It contains five self trays weighing approximately 25 kgs of electrodes. It has front opening door with lock facility.