Hans Hydraulic & Pneumatics SystemsHans Hydraulic & Pneumatics Systems
Home Profile Products & Services Contact Us


Showcase Gallery



Home » Products & Services » SPORLAN VALVE

SPORLAN VALVE

Sporlan Solenoid Valves are made in two general types, normally closed and normally open. The normally closed types may be further sub-divided into direct acting and pilot operated types. The Normally Closed A3 and E3 (Direct Acting) and E5through the E42 series (Pilot Operated) and the Normally Open OB9 and OE9 through the OE42 series may be mounted in either a horizontal or vertical line.

The Sporlan “E” series solenoid valves feature extended solder type connections as standard. One important benefit to the user is that all valves in the “E” series can be installed without disassembly using either low or no silver content brazing alloy. The “E” series is interchangeable with the “B” series, solder type valves, providing the overall length can be accommodated. All valves in the “E” series have the same capacities as the “A” & “B” series with the exception of the E42.All Sporlan solenoid valves are designed for liquid, suction and discharge gas applications.

SPORLAN VALVE



Sporlan Ball Valve

Sporlan Ball Valve


EBV Series(Welded) EBVT Series (Welded with Access Fitting)

  • Robotically welded body joint. 100% factory tested to ensure positive, leak-free performance.
  • Forged brass body construction with extended copper fittings and optional access fittings.
  • Full size ports for unrestricted flow on most sizes (3/8" through 3-1/8") 
  • Dual Teflon seals surround the polished, brass ball with a secondary seal to prevent leakage due to foreign material.
  • Dual Teflon stem seals with internal packing nut for the primary seal; no synthetic "O" rings.
  • Fully open to fully closed with a 1/4 turn. Positive movement ensured with internal, forged mechanical stops.
  • No need to remove the seal cap to open or close the valve.
  • Ball internal relief port design ensures positive shut-off in either flow direction…even during system evacuation
  • All EBV(T) ball valves are non-directional and may be installed in any position.  
  • Full refrigeration service temperature range: -40°F to +325°F (-40°C to +149°C).
  • Design working pressure: 700 PSI  
  • U.L. and C-U.L. Listed File No. 5460.
  • The new EBV(T) ball valves are suitable for use with R-11, R-12, R-22, R-123, R-125, R-134a, R-236Fa, R-402A, R-402B, R-404A, R-407C, R-410A, R-500, R-502, R-507 and RS-44









Sporlan See- All Moisture Liquid Indicators

Sporlan See- All Moisture Liquid Indicators


One Indicator for Refrigerants 12, 134a, 22, 404A, 407C, 410A, 502 and 507.

The See•All Moisture and Liquid Indicator  provides a true moisture indication for Refrigerants 12, 134a, 22, 404A, 407C, 410A, 502 and 507. The See•All®  is also suitable for Refrigerants 401A & B, 402 A & B, 408A and 409A. The dark green indicates dry and a bright yellow indicates wet. The one indicator avoids the confusion found in models with two elements. You cannot pick the wrong element when checking the moisture content of the system.
  • Reliable and Accurately calibrated color change points.

The See•All Moisture and Liquid Indicator is accurately calibrated in parts per million of moisture for each refrigerant. All moisture indicators change color on the basis of relative saturation of the refrigerant. Therefore, liquid line temperature must be considered if an accurate calibration is to be obtained. For easy comparison, a color chart is part of the label.

  • Color Changes are easily distinguished and reversible.

The indicator’s color differs so widely between WET and DRY conditions that there is no possibility of confusion between the two. Colors will reverse as often as moisture concentration in the system changes Large full view sightglass.

The See•All Moisture and Liquid Indicator has an extra large crystal clear sightglass for viewing the refrigerant. Bubbles indicate a shortage of refrigerants or a restriction in the liquid line.

  • Indicator protected from discoloration and dirt.

The indicator is protected by a filter pad and screen. This prevents washing of the indicator by the refrigerant and protects it from system contamination and turbulence.

  • Replaceable indicator element.

The color indicator paper can be changed on the new fused glass models without removing the See•All from the line. Replacement is through the bottom (see SA-14SU below). Request the K-SA-4 kit.

  • Disassembly of the smaller sizes not required.

The extended fittings on solder models in the smaller sizes make it unneccesary to disassemble for installation. A double duty plastic cap is supplied to keep the glass free from dust, dirt and grease. It also permits the service engineer to use his own discretion concerning instructions to his customers on observing the See•All Moisture and Liquid Indicator

  







Sporlan Solenoid Valves

Sporlan Solenoid Valves


Sporlan Solenoid Valves are made in two general types, normally closed and normally open. The normally closed types may be further sub-divided into direct acting and pilot operated types. The Normally Closed A3 and E3 (Direct Acting) and E5through the E42 series (Pilot Operated) and the Normally Open OB9 and OE9 through the OE42 series may be mounted in either a horizontal or vertical line.

The Sporlan “E” series solenoid valves feature extended solder type connections as standard. One important benefit to the user is that all valves in the “E” series can be installed without disassembly using either low or no silver content brazing alloy. The “E” series is interchangeable with the “B” series, solder type valves, providing the overall length can be accommodated. All valves in the “E” series have the same capacities as the “A” & “B” series with the exception of the E42.All Sporlan solenoid valves are designed for liquid, suction and discharge gas applications.

Most Sporlan Solenoid Valves are listed by Underwriters’ Laboratories, Inc.


  • Guide No. Y10Z – File No. MH4576 and Canadian Standards

Association:


  • Guide 440-A-O, Class 3221, File 19953 and CE provisions of the LVD 73/23/EEC and PED 97/23/EC.

Maximum Rated Pressures:



Valve Type E42 Series:

  • 450 PSI

All Other Valve Types:


  • 500 PSI

Interchangeability Of Coils


  • MKC-1

For Types A3, E3, B6, MB6, E5, E6, ME6, E35 and ME35 series. MKC-2 , for types B9, MB9, E9 and ME9 series through the E42 and ME42 series. OMKC-1 and OMKC-2 Coil Assemblies are for use on normally open valve


Electrical Specifications:

Standard Coil Ratings

  • MKC-1, OMKC-1, MKC-2 and OMKC-2: 24/50-60,
  • 120/50-60, 208-240/50-60. Dual Voltage 4 Wire Coils – 120-208-240/50-60,
  • Slight additional cost
  • Available with junction box or conduit boss at no extra charge. Also, DIN coils are available for an additional cost. For other voltages and cycles consult Sporlan.







Sporlan Sealed Model Catch-All Filter- Driers

Sporlan Sealed Model Catch-All Filter- Driers


  • Make: Sporlan Vlave Co
  • Series: CatchAll
  • Model / Part / Type: C303
  • Includes all/only items pictured.
  • The Contaminant Barrier starts with the most trusted filter-drier in the industry – the molded core Catch-All. The Catch-All is the key component in protecting your air conditioning or refrigeration system. The Catch-All’s special blend of desiccants is designed to remove acid, sludge, varnish and wax. And, for further protection against contaminants use Sporlan Suction Filters with exclusive bi-directional flow feature.







    Refrigerant Valve

    Refrigerant Valve


    The Sporlan Distributor is an efficient refrigerant distributing device that assures uniform feeding of refrigerant to all passes of a multicircuited evaporator. It can be used with any conventional externally equalized thermostatic expansion valve Auxiliary Side Connectors (ASC) permit the conversion of conventional Sporlan refrigerant distributors to hot gas bypass, hot gas defrost or reverse cycle service.

    Side Connection Distributors

    Connection

    Size

    Tev

    Model

    Distributor

    Type

    MAXIMUM NUMBER of CIRCUITS NOZZLE

    Type

    Side

    Connection Material

    3/16 1/4 5/16 3/8

    1/2 SAE BF, BQ, F, G, Q, RC, RI 1650 (R) 7 5 — — PERM. 3/8 or 1/2 ODF

    #360 Brass

    5/8 ODM EBF, EBQ, EQ, RC, RI, S, SBF, SBQ 1651 (R) 7 5 — — J (R)

    3/8 or 1/2 ODF

    7/8 ODM EBQ, EBS, EQ, O, S 1653 (R) 12 9 6 4 G (R)

    1-1/8 ODM EBS, O, S 1655 (R) 20 12 10 7 E (R) 1/2 or 5/8 ODF

    1-3/8 ODM EBS, O, W 1657 (R) 26 18 14 11 C (R) 5/8 or 7/8 ODF

    1-5/8 ODM O, W 1659 (R) 32 24 18 14 A (R) 7/8 or 1-1/8 ODF

     







    Sporlan Refrigeration Valve

    Sporlan Refrigeration Valve


    Sporlan Division

    From slushy machines to skyscrapers, Sporlan is the preferred component supplier of the refrigeration and air conditioning industry. The commitment to our customers to provide quality and continual product innovation has kept Sporlan at the forefront of the industry  


    One of the most demanding refrigeration environments—today's supermarket—demands the most advanced equipment testing methods available. Sporlan has it: the Sporlan Supermarket Test Lab.

    Developed by Sporlan engineers and now operating within our Washington, Mo. division headquarters, the Sporlan Supermarket Test Lab is the refrigeration industry's most modern, comprehensive and sophisticated supermarket test lab. It puts component and systems testing methodologies where they are needed most— within the supermarket itself.

     

    We've taken testing to the next level with a million dollar facility that mimics a wide spectrum of real life supermarket operations.  

          
    The first step in reducing costs is to gather and analyze data determining the factors that contribute to high energy expenditures. Sporlan's MT Alliance™ comprehensive data logging and reporting abilities allow you to collect and analyze your energy consumption information. Customized energy profiles allow you to view your utility spend and focus on energy planning and cost management.

    Configuring refrigeration, HVAC and lighting systems with energy-saving schedules and settings is simple and intuitive with the MT Alliance graphical user interface. Energy managers can easily navigate the user-friendly MT Alliance software, and immediately view the results. Simply point and click on temperature, humidity, kWh, pressure or any other variable that is measured and logged. Make informed decisions for effective energy management.

    Affect your bottom line with MT Alliance Supermarket Control Solutions...simply powerful.







    Sporlan Pressure Regulating Valves


    Crankcase Pressure Regulating Valves are designed to prevent overloading of the compressor motor by limiting the crankcase pressure to a predetermined maximum value during and after a defrost cycle or a normal shutdown period. These valves automatically throttle the vapor flow from the evaporator until the compressor can handle the load. Sporlan manufactures five adjustable direct acting

    Models...CRO-4,

    CRO-6,

    CROT-6,

    CRO-10 and

    CROT-10...All models respond only to their outlet pressure and modulate to prevent the suction pressure at the compressor from rising above the valve setting.

    Since these valves are adjustable, the setting may be altered to suit the specific system requirements.

    Selection and Capacity Ratings 

    The ratings for these valves vary depending on these items: design suction pressure after pulldown, maximum allowable suction pressure

    Connections – (Standard Connections are in

    BOLD  type).

    CRO-4 –

    3/ 8", 1/2" ODF Solder and 3/8", 1/2" SAE Flare

    CRO-6, *CROT-6 –

    5/ 8", 7/ 8", 1-1/8" ODF Solder and 1/2", 5/8" SAE

    Flare.

    CRO-10, *CROT-10 –

    7/ 8", 1-1/ 8", 1-3/8" ODF Solder.

    *"T" indicates access valve on inlet Connections – (Standard Connections are in

    BOLD type).

    CRO-4 –

    3/ 8", 1/2" ODF Solder and 3/8", 1/2" SAE Flare

    CRO-6, *CROT-6 –

    5/ 8", 7/ 8", 1-1/8" ODF Solder and 1/2", 5/8" SAE

    Flare.

     7/ 8", 1-1/ 8", 1-3/8" ODF Solder.

    *"T" indicates access valve on inlet connection

    CRO-10, *CROT-10.









    Contact Us

    Hans Hydraulic & Pneumatics Systems
    Mr. Devendra Kumar (Marketing Manager)
    No. 669, Churiwalan, Chawri Bazar
    Delhi - 110006, India

    Contact via E-mail



    Home  |   Profile  |  Products & Services   |   Trade Offers (20)  |  Site Navigation  |   Contact Us

    Member IndiaMART.com © Hans Hydraulic & Pneumatics Systems. All Rights Reserved (Terms of Use)
    Developed and Managed by IndiaMART InterMESH Limited

    Contact Us

    *Describe Your Requirements in Detail
    Remaining Characters: 3500
    Your Contact Information
    Your Contact Information
    *Name:
    *Email:
    Company:
    Website:
    *Country:

    City:
    *Mobile:
    *Enter the code: