X
Hi
terms privacy policy
Verifying...
1

Have a requirement?
Chat with us

Hi
terms privacy policy
Verifying...
1

Have a requirement?
Chat with us

Repair and Restoration Chemicals

Our product range includes a wide range of Repair and Restoration Chemicals such as Microconcretes, Protective Coating of Steel Reinforcement, Rust Converter, Polymer Mortars, Crackfill Pastes, Crackfill Powders and many more items.
₹ 160/ Kg
₹ 160/ Kilogram
₹ 160/ Kilogram
₹ 160/ Unit
₹ 160/ Kg
₹ 160/ Kilogram(s)
₹ 160/ Kilogram(s)
₹ 160/ Kilogram(s)

Interested in this product?
Get Best Quote
ApplicationIndustrial Use
Packaging TypeHDPE CAN
BrandPAR CLEAN-R
Pack Size5 KG & 20 KG

Protective Coating of Steel Reinforcement:

It is a polymer based formulation. These products are extensively used for forming a strong film on steel surfaces with utmost perfection. Moreover, these products are widely known for their ability to inhibit rusting and bonding with concrete. Our product range is made available to the clients in liquid state and green colour.


Applications:

  • For coating of reinforcement bars especially in repairs
  • For protection of marine structures and buildings in saline and corrosive environment
  • For encased steel members in industrial buildings, high tensile wires/strands/cables as in pre-stressed concrete section


Advantages:

  • Total protection to all embedded steel members
  • Helps in good bonding of steel and concrete
  • Provides effective barrier to water and other corrosive elements
  • Easy to apply with a regular paint brush


Guidelines for use:

  • Remove the rust from the steel surface using a wire brush followed by a treatment of PARCLEAN-R (Please see PARCLEAN–R data sheet)
  • Mix it with cement in 1:1 ratio by weight to form a consistent slurry
  • Apply this mixture on the steel surface with a brush
  • Allow the coating to dry for 6–8 hrs
  • Apply second coat to ensure that all pin holes are eliminated
  • Allow the second coat to dry for 6–8 hrs before proceeding further
  • The treated area is further repaired using PARCRETE-J OR PARCRETE-A bond coat followed by cement mortar modified with PARCRETE-J or PARCRETE-A to build up the new concrete layer by layer. (Please see PARCRETE-J or PARCRETE-A data sheets)
  • PARCOAT–S covers about 80 sq. ft./coat/kg of steel surface


Other details:

  • Storage: Stable under normal conditions. Should be stored away from direct sunlight
  • Handling: Use of gloves and safety glasses is recommended
  • Packing: Available in 1 kg, 5 kg, 10 kg and 20 kg


Additional Information:

  • Item Code: PARCOAT-S

View Complete Details

Yes, I am interested!

Interested in this product?
Get Best Quote

Crackfill Powder

₹ 160/ KgGet Latest Price

Product Brochure

BrandPAR
Usage/ApplicationWalls
ColorWhite
State/FormPowder
State Of MatterPowder
ApplicationWalls
FeaturesEasy to apply

Features & Benefits :

  • Accommodates movements in the cracks
  • Water based stainer can be mixed with crack filler
  • Over coatable after curing
  • Single component and needs only mixing
  • Replaces costly Sealants and putties
  • No shrinkage
  • Excellent Adhesion


Technical Information:

  • Self Life : 6 months
  • Coverage : Approx. 60 RFT/kg for 5 mm x 5 mm
  • crack Nature : White coloured powder
  • Storage : Store in a cool and dry place


Additional Information:

  • Item Code: Par-Crackfill-Powder

View Complete Details

Yes, I am interested!

Interested in this product?
Get Best Quote

Acrylic Polymer for Repair

₹ 160/ KilogramGet Latest Price

Product Brochure

BrandPar Crete J-540
Packaging Size20 kgs

Polymer Mortars are acrylic based polymers that are widely used for helping the strong adhesion of layers of concrete. These products are highly demanded in several constructions and rehabilitation sectors. Moreover, these blue colored liquid mortars are checked on certain quality parameters to gauge their flawlessness, before their dispatch to the client's end.

Applications:

    • In repair of damaged RCC structures
    • In repair of damaged industrial floors and RCC tanks
    • For restoration of old buildings
    • For bonding of layers of concrete in new construction (construction joints)
    • Mixed along with cement grout to stop water leakages

      Advantages:

        • Provides strong bonding between old & new concrete and helps absorb stresses due to differential expansion and contraction
        • Improves water impermeability
        • Provides high tensile & flexural strength

          Guidelines for use:
            • After exposing the reinforcement, it is cleaned and treated with PARCLEAN–R AND PARCOAT–S (Please see PARCLEAN–R AND PARCOAT–S data sheets)
            • The loose concrete around this area is then chipped away and removed
            • Mix it and cement in 1:1 ratio to form a consistent slurry
            • Apply a bond coat using the above slurry with a fine brush to all the exposed concrete
            • While the bond coat is still tacky, apply polymer mortar in paste or dough form (the ratios and procedure as shown below), build it up layer by layer, with each layer being not more than 15-20 mm at a time
            • After the first layer is applied, it is left to dry for 24 hours before the second layer is applied
            • The process is repeated till the old concrete thickness is re-achieved
            • After the polymer mortar has built up the concrete to its original thickness, the treated area is to be kept moist for 4 - 5 days before the final plaster coat is done in the usual manner

              Proportions:

              • Parcrete–J 540 : I part by weight
              • Cement: 5 parts by weight
              • This is mixed till a dough-like consistency is reached
              • Small quantity of water (about 3-5% by weight of mortar mixture) may be added to help achieve ideal workability of the dough
              • A rough test to check the ideal workability is to drop a fist sized ball made of this dough into the dough mixture from shoulder height
              • The dough should not shatter on impact
              • Quartz sand: 15 parts by weight (for beams and columns a mix of fine and coarse quartz sand in the ratio 40:60, while for slabs the fine to coarse ratio is 60:40)


              Polymer Cement Grout:

                • Take 1 kg of it, 3 kg of cement and 2 kg of water (Polymer:Water:Cement=1:2:3) by weight
                • Mix it and water for about 2 minutes
                • Add this solution to the cement and mix till a consistent slurry is formed
                • Grout as recommended
                • Any modification in the proportion may be made in consultation with your RCC consultant or our technical services


                Additional Information:

                • Item Code: Parcrete-J-540

                View Complete Details

                Yes, I am interested!

                Interested in this product?
                Get Best Quote

                Rust Converter

                ₹ 160/ KilogramGet Latest Price

                ApplicationIndustrial Use

                Rust Converters are especially formulated by using genuine quality ingredients and other material. This is a perfect blend of organic & inorganic rust neutraliser, which is used to convert rust into inert compounds. Moreover, these liquid and pale yellow colored are used to inhibit rusting of steel surfaces.

                 

                Applications:

                 

                • On reinforcement steel in old/new buildings.
                • On old steel structure, pipes, tanks & vessels.
                • On rusted parts in vehicles and farm equipments.
                • On rusted railings, gates, rolling shutters and others.

                 

                Advantages:

                 

                • Converts rust to inert compounds
                • Extends life of steel & RCC structures
                • Easy to apply with a brush
                • Inhibits further rusting

                 

                Guidelines for use:

                 

                • Remove the rust from the steel surface using a wire brush
                • Clean the surface to remove any powder or loose particles
                • Apply it to the steel surface using a fine brush (Note: Plastic container should be used for this)
                • Allow the coat to dry for about 12 hours
                • Inspect the area for loose material and powder and remove the same with a brush
                • In case of any sign of rust remaining on the surface, apply a second coat.
                • This covers about 100 sq.ft/coat/kg on a steel plate

                 

                Other details:

                 

                • Storage: Stable under normal conditions. Should be stored away from direct sunlight.
                • Handling: Use of gloves and safety glasses is recommended.
                • Packing: Available in 1 kg, 5 kg, 10 kg and 20 kg.


                Additional Information:

                • Item Code: Parclean-R

                View Complete Details

                Yes, I am interested!

                Interested in this product?
                Get Best Quote

                Latex For Waterproofing

                ₹ 160/ KgGet Latest Price

                Technical Information :

                • Type : Styrene Butadiene Polymer Liquid
                • Color : White
                • Specific Gravity : 1.02 + 0.02
                • Storage Condition : Free from frost
                • Solid Content : 47 + 1% For best result - use before 1 year if unopened
                • Consumption : 1 kg will cover 70 - 80 sq. ft. area in 2 coats for a proportion mix L4:71.


                Additional Information:

                • Item Code: Par-Latex

                View Complete Details

                Yes, I am interested!

                Interested in this product?
                Get Best Quote

                Rust Passivator

                ₹ 160/ UnitGet Latest Price

                Product Brochure

                BrandPar Coat S
                Pack Sizes LT/KG20 kg

                Protective Coating of Steel Reinforcement:

                It is a polymer based formulation. These products are extensively used for forming a strong film on steel surfaces with utmost perfection. Moreover, these products are widely known for their ability to inhibit rusting and bonding with concrete. Our product range is made available to the clients in liquid state and green colour.


                Applications:

                • For coating of reinforcement bars especially in repairs
                • For protection of marine structures and buildings in saline and corrosive environment
                • For encased steel members in industrial buildings, high tensile wires/strands/cables as in pre-stressed concrete section


                Advantages:

                • Total protection to all embedded steel members
                • Helps in good bonding of steel and concrete
                • Provides effective barrier to water and other corrosive elements
                • Easy to apply with a regular paint brush


                Guidelines for use:

                • Remove the rust from the steel surface using a wire brush followed by a treatment of PARCLEAN-R (Please see PARCLEAN–R data sheet)
                • Mix it with cement in 1:1 ratio by weight to form a consistent slurry
                • Apply this mixture on the steel surface with a brush
                • Allow the coating to dry for 6–8 hrs
                • Apply second coat to ensure that all pin holes are eliminated
                • Allow the second coat to dry for 6–8 hrs before proceeding further
                • The treated area is further repaired using PARCRETE-J OR PARCRETE-A bond coat followed by cement mortar modified with PARCRETE-J or PARCRETE-A to build up the new concrete layer by layer. (Please see PARCRETE-J or PARCRETE-A data sheets)
                • PARCOAT–S covers about 80 sq. ft./coat/kg of steel surface


                Other details:

                • Storage: Stable under normal conditions. Should be stored away from direct sunlight
                • Handling: Use of gloves and safety glasses is recommended
                • Packing: Available in 1 kg, 5 kg, 10 kg and 20 kg


                Additional Information:

                • Item Code: Parcoat-S

                View Complete Details

                Yes, I am interested!

                Interested in this product?
                Get Best Quote

                Crackfill Paste

                ₹ 160/ KgGet Latest Price

                Features & Benefits :
                • Paste form, easy to apply
                • Flexible, therefore does not crack & accommodates minor movements in cracks
                • Water based - hence eco-friendly
                • Can be applied on damp surfaces but not on cracks with running water
                • Over coatable after 24 hours Non-staining
                • Excellent adhesion with cementitious surface
                • UV resistance It can be tinted using water-based stainer

                Technical Information :

                • Appearance : White
                • Full curing time : 7 days at 30'C
                • Specific gravity : 1.40 ± 0.02 gm/cc
                • Coverage : 25-30 running meter/kg (for a length of 1 metre, depth and width of 5 min)


                Additional Information:

                • Item Code: Par-Crackfill-Paste

                View Complete Details

                Yes, I am interested!

                Interested in this product?
                Get Best Quote

                Crackfill-Powder

                ₹ 160/ Kilogram(s)Get Latest Price

                Features & Benefits :

                • Accommodates movements in the cracks
                • Water based stainer can be mixed with crack filler
                • Over coatable after curing
                • Single component and needs only mixing
                • Replaces costly Sealants and putties
                • No shrinkage
                • Excellent Adhesion


                Technical Information:

                • Self Life : 6 months
                • Coverage : Approx. 60 RFT/kg for 5 mm x 5 mm
                • crack Nature : White coloured powder
                • Storage : Store in a cool and dry place

                View Complete Details

                Yes, I am interested!

                SBR for Repair

                ₹ 160/ Kilogram(s)Get Latest Price

                These are SBR based polymers that are widely used in the strong adhesion of different layers of concrete. Polymer Mortar is a reddish blue coloured liquid, which is widely appreciated for its flawless quality and accurate composition. Besides, we put in our best efforts to deliver the ordered products at the clients' end within the stipulated time frame.

                 

                Applications:


                • In repair of damaged RCC structures
                • In repair of damaged industrial floors and RCC tanks
                • For restoration of old buildings
                • For bonding of layers of concrete in new construction (construction joints)
                • Mixed along with cement grout to stop water leakages

                 

                Advantages:
                 

                • Provide strong bonding between old & new concrete and helps absorb stresses due to differential expansion and contraction
                • Improves water impermeability
                • Provides high compressive, tensile & flexural strength

                 

                Guidelines for use:

                  
                • After exposing the reinforcement, it is cleaned and treated with PARCLEAN–R and PARCOAT–S (Please see PARCLEAN–R AND PARCOAT–S data sheets)
                • The loose concrete around this area is then chipped away and removed
                • Mix PARCRETE–A 440 and cement in 1:1 ratio to form a consistent slurry
                • Apply a bond coat using the above slurry with a fine brush to all the exposed concrete
                • While the bond coat is still tacky, apply the polymer mortar in paste or dough form (the ratios and procedure as shown below), build it up layer by layer, with each layer being not more than 15-20 mm at a time
                • After the first layer is applied it is left to dry for 24 hours before the second layer is applied
                • The process is repeated till the old concrete thickness is re-achieved
                • After the polymer mortar has built up the concrete to its original thickness, the treated area is to be kept moist for 4 - 5 days before the final plaster coat is done in the usual manner 



                Additional Information:

                • Item Code: Parcrete-A-440

                View Complete Details

                Yes, I am interested!

                Polymer Mortars

                ₹ 160/ Kilogram(s)Get Latest Price

                These are SBR based polymers that are widely used in the strong adhesion of different layers of concrete. Polymer Mortar is a reddish blue coloured liquid, which is widely appreciated for its flawless quality and accurate composition. Besides, we put in our best efforts to deliver the ordered products at the clients' end within the stipulated time frame.

                 

                Applications:


                • In repair of damaged RCC structures
                • In repair of damaged industrial floors and RCC tanks
                • For restoration of old buildings
                • For bonding of layers of concrete in new construction (construction joints)
                • Mixed along with cement grout to stop water leakages

                 

                Advantages:
                 

                • Provide strong bonding between old & new concrete and helps absorb stresses due to differential expansion and contraction
                • Improves water impermeability
                • Provides high compressive, tensile & flexural strength

                 

                Guidelines for use:

                 
                • After exposing the reinforcement, it is cleaned and treated with PARCLEAN–R and PARCOAT–S (Please see PARCLEAN–R AND PARCOAT–S data sheets)
                • The loose concrete around this area is then chipped away and removed
                • Mix PARCRETE–A 440 and cement in 1:1 ratio to form a consistent slurry
                • Apply a bond coat using the above slurry with a fine brush to all the exposed concrete
                • While the bond coat is still tacky, apply the polymer mortar in paste or dough form (the ratios and procedure as shown below), build it up layer by layer, with each layer being not more than 15-20 mm at a time
                • After the first layer is applied it is left to dry for 24 hours before the second layer is applied
                • The process is repeated till the old concrete thickness is re-achieved
                • After the polymer mortar has built up the concrete to its original thickness, the treated area is to be kept moist for 4 - 5 days before the final plaster coat is done in the usual manner


                Additional Information:

                • Item Code: PARCRETE-A-440

                View Complete Details

                Yes, I am interested!

                Get in touch with us

                Reach Us

                Par Speciality Polymers Private LimitedUnit No. 309, Turbhe Industrial Park, Plot No. C-56/1 TTC Industrial Area, Turbhe, Near Galaxy Research Center, Navi Mumbai, Thane-400705, Maharashtra, India

                Alok Kumar (Director)

                View Mobile Number30% Call Response Rate

                Send SMS
                Send Email
                Leave a Message, we will call you back!
                Send your enquiry to this supplier
                terms privacy policy
                Tell us what you need, and we’ll help you get quotes
                Tell us what you
                need
                Receive seller
                details
                Seal the deal
                Pay with IndiaMART
                Tell us what you need, and we’ll help you get quotes
                terms privacy policy