Telecom Access Products

We are offering a wide range of TDM Multiplexer, which is designed for designed for E1 network access, enabling an E1 Link to be the fractioned and shared between several voice and data channels, as well as the interconnection of E1 networks and devices, it allows one or more 2 Mbps E1 accesses to be shared by different applications and users, thus reducing communication costs.

 Specifications:

• Recommended usage Includes data channels transport, LAN traffic, digital/analog voice channels and video conference applications
• ACCESS MuX AD is composed of a basic unit for table or 19" rack installation, one or 2 AC/DC power implies and a MuX module
• Capable of hosting eight application modules multiple data and voice applications are possible through the use of several different modules
• Electrical and optical E1 Interfaces, G.SHDSL, multiple interface data (Speed of Nx64kbps and less than 64 kbps sub range.) voice interfaces, routing interfaces and TCP/IP network transport  Cross-connect capabilities allow 64kbps
• In-band management may be done using timeslots from one of the E1 links

Features:

• Eight slots for application modules
• Several application modules available
• Flexible options for combining application modules
• DSO-level cross-connect (64 kbps)
• AC/DC power source
• Redundant power supply option
• In-band and out-band SNMP management
• Public telephone support
• Unidirectional insertion and cabling of application modules
• Hol-wappable module (insertion and removal)
• Alarm transport
• FTP support for software updates
• Management module integrated to DMS (Digitel Management Suite)
• X.50 protocol for low-speed channel support

Applications:

• E1 multiplexing: access to E1 networks In multiple topologies
• E1 fractioning of N ports
• Sharing of E1 links by multiple voice/data channels Nx64 kbps or G.703 (64 kbps)
• Cross-connect: 64 kbps timeslots transfers from any to any port
• Sharing of E1 links between a digital PABX and multiple data channels, LAN traffic and/or analog voice channels (including public telephones)
• Traffic consolidation of various sub-utilized E1 links Into a single E1 link
• Connection of two or more digital PABXs(CAS) and data channel to an E1 link
• V.35 data channel multiplexing in a V.35 (Nx64kbps link)
• Interface conversion: G.703/G.704 x V.35/V.36
• Communication with equipments that support the X.50 protocol

BASIC UNIT :

• Slots for application modules: 8 V AC
• Power requirements: AC/DC: 93-253 VAC (50/60 Hz) and -36 to -60VDC (full run-range) With redundant power supply option
• Dimensions: 133(3U) x485x205mm (HxWxD)
• Operational conditions: Operation temperature. 50C to 500C under request
• Relative humidity- up to 95% (non-condensed)

CONTROL MODULE:

• AMD MUX - Control module
• CLI configuration alien via Console or Ethernet, GUI configuration via Console SNMP ageni management
• Out-band : via Ethernet management port
• In-band : PPP or Frame Relay
• Routing : tcp/ip via 10/100 Ethernet
• One logic WAN port, N!<64 Kbps PPP and Frame Relay protocols RIP/RIP2 static routing NAT/PAT address translation 

We are the proficient manufacturer and supplier of Access Multiplexer, which is comprised of basic unit for installation on a desk or a 19" rack. It has AC/DC power supply, one E1/G.703 [75/120 ohms] port, four serial data ports with multi-interface and one LAN port. This is made using optimum quality raw material procured from our reliable vendors. Further this is tested for quality and reliability   in our technically advanced testing unit on various quality parameters. It features a slot for optional application modules, voice or data, a range of application modules, the same used by ACCESS MUX AD, allows for the use of the product in multiple applications. Amongst these application modules, there are electric E1 and optical E1 interfaces. G.SHDSL. multiple interface data and speeds of Nx64 kbps and sub-rates under 64 kpbs, voice interfaces and routing and TCP/IP data transport and routing interfaces.

The ACCESS MUX COMPACT configuration may be done through the equipment's Ethernet interface or Console port. It features friendly configuration interface through the browser and supports SNMP management that can be done on the band itself using one of the E1 link timeslots.

Features:

• Modular E1 multiplexer with several types of interfaces
• 1 E1 port, 4 serial ports, 1 LAN port
• 1 slot for optional hot swappable application module
• Same application modules as for ACCESS MUX AD

-          E1 Electrical, E1 optical, SHDSL, serial data

• -Analog voice (FXS, FXO, E&M)
• -TCP/IP routing
• Module insertion and unidirectional cabling
• AC/ DC power supply
• DSO-level cross-connect capability (64 kbps)
• Drop-insert capability
• Public telephone support
• X.50 protocol for low-speed channel support
• In-band and out-band SNMP management
• Management module integrated to DMS (Digital Management Suite)
• FTP support for software updates
• Testing facilities

Applications:

• E1 multiplexing: access to E1 networks in multiple topologies
• E1 fractioning of N ports Sharing of E1 links by multiple voice/data channels
• V.35 data channel multiplexing in a v.35 (Nx64kbps) link.
• Communication with devices that support the X.50 protocol