PP Valve Flange Ends

We offer a wide range of PP ball valves flange end, that are fabricated using the best grade materials. These ball valves are appreciated for their pressure resistant ability and high durability. Available in various sizes, thickness and lengths, these are designed as per the ANSI, BS & DIN standards.

Technical Specification:

Construction	3 piece design, 1 piece stem (spindle), full bore, Teflon seated
Standard	As per manufacturer's
Connection End	Flanged as per ANSI B 16.5 (150#) & BS 10 (Table D/E/F) & DIN STD.

M.O.C. Available

• PP (Polypropylene)
• PVDF (Polyvinylidene Fluoride)
• HDPE (High Density Polypropylene)

Size Inch	mm	OD	ID	L	T	H	H1
1 - 2	15	95	15	118	15	55	131
3 - 4	20	112	190	129	17	65	131
1	25	118	24	153	19	89	161
1 1/2	40	137	37	178 0	20	105	204
2	50	164	48.5	222	22	120	204
2 1/2	65	180	62.5	227	24	141	262
3	80	198	72	2540	25	150	262
4	100	225	99	295	26	172	312
6	150	302	150	431	31	245	305
8	200	360	200	462	32	285	305

No.	Description	Material	Qty.
P1	Body	PP / HDPE / PVDF	1
P2	Side Piece/Connector	PP / HDPE / PVDF	2
P3	Ball	PP / HDPE / PVDF	1
P4	Stem/Spindle	M.S. / S.S. / PP / HDPE / PVDF Coated	1
P5	Seat Ring	PTFE	2
P6	Connector Seal	Neoprene Rubber / PTFE / PVC	2
P7	Stem Seal Ring	PTFE	1
P8	Stem O-Ring	Neoprene	1
P9	Stud, Nut & Washer	M.S. (En8)/S.S. 316	Req.
P10	Nut Cap	PP	Req.
P11	Handle	M.S. PP Coated	1
P12	Handle Hex, Pin	M.S. (En8)/S.S. 316	1
P13	Handle Cap	PP	1

Offered in different specifications, our PP non return valves flange ends are made using high quality PP, PVDF material and neoprene rubber. Known for their stress tolerance and surface hardness, these are designed in compliance with ANSI, BS and DIN standards.

Technical Specification:

Construction	Ball type design, soft seated
Standard	As per manufacturer's
Connection End	Flanged as per ANSI B 16.5 (150#) & BS 10 (Table D/E/F) & DIN STD.

Available M.O.C.

• PP (Polypropylene)
• PVDF (Polyvinylidene Fluoride)

Size
Inch	mm	OD	ID	H	T
1	25	119	260	156	18
1 1/2	40	138	39	167	19
2	50	163	48	168.5	22
2 1/2	65	182	63	252	22
3	80	200	76	256	23
4	100	228	100	299	24
6	150	310	151	365	32

No.	Description	Material	Qty.
P1	Top Body	PP/PVDF	1
P2	Bottom Body	PP/PVDF	1
P3	Ball	M.S. PP / PVDF Coated	1
P4	Ball Ring	PP/PVDF	1
P5	Seat Ring	Neoprene Rubber	1

We manufacture and export a qualitative range of PP diaphragm valves flange ends, that are designed as per specific requirements of the clients. Widely used in various industrial applications, these are available in different sizes, lengths and thickness.

Technical Specification:

Construction	Weir type design, soft seated, raising stem
Standard	As per manufacturer's
Connection End	Flanged as per ANSI B 16.5 (150#) & BS 10 (Table D/E/F) & DIN STD.

Available M.O.C.

• PP (Polypropylene)
• PVDF (Polyvinylidene Fluoride)

Size
Inch	mm	OD	L	T	H
1 - 2	15	96	122	16	82
3 - 4	20	100	122	17	105
1	25	112	141	20	114
1 1/2	40	134	166	21	173
2	50	153	200	24	203
2 1/2	65	184	245	24	218
3	80	184	245	24	218

No.	Description	Material	Qty.
P1	Body	Polypropylene	1
P2	Bonnet	Polypropylene	1
P3	Diaphragm	Neoprene	1
P4	Stem	M.S./S.S.	1
P5	Nut	M.S./S.S.	1
P6	Compressor	Aluminum / C.I.	1
P7	Pin	M.S./S.S	1
P8	Hand Wheel	Polypropylene	1
P9	Nut, Bolt & Washer	M.S./S.S.	4
P10	Diaphragm Stud.	Brass	1
P11	Cap	Polypropylene	1

We have a range of PP foot valves flange end, that are designed using the latest technology. These are widely used in various industries such as chemicals, pharmaceuticals, petrochemicals, fertilizer, sugar, oil refineries etc. Further, these are available in various specifications and at most competitive prices.

Technical Specification:

Construction	Ball type, soft seated
Standard	As per manufacturer's
Connection End	Flanged as per ANSI B 16.5 (150#) & BS 10 (Table D/E/F) & DIN STD.

Available M.O.C.

• PP (Polypropylene)
• PVDF (Polyvinylidene Fluoride)

Size
Inch	mm	OD	ID	H	T
1	25	120	33.5	176	16
1 1/2	40	136	39	210	20.5
2	50	160	51	217	21
2 1/2	65	181	62.5	313	21
3	80	199	74.5	313	21
4	100	228	100	356	26
6	150	300	150	475	30

No.	Description	Material	Qty.
P1	Top Body	PP/PVDF	1
P2	Bottom Body	PP/PVDF	1
P3	Screen	PP/PVDF	1
P4	Ball	M.S. PP / PVDF Coated	1
P5	Ball Ring	PP/PVDF	1
P6	Seat Ring	Neoprene Rubber	1

Technical Specification:

Construction	Ball type, soft seated
Standard	As per manufacturer's
Connection End	Screw end (BSP thread)

Our PP Y type strainer flange ends are manufactured using the best quality neoprene and polypropylene. Our products have earned worldwide accolades due to high tolerance level and corrosion resistance. Further, these are also available in customized specifications to the clients.

Technical Specification:

Construction	Single piece body
Standard	As per manufacturer's
Connection End	Flanged as per ANSI B 16.5 (150#) & BS 10 (Table D/E/F) & DIN STD.

Available M.O.C.

PP (Polypropylene)

Size
Inch	mm	OD	ID	L	L1	H	T
1 - 2	20	95	20	180	110	80	13
3 - 4	25	100	20	180	110	80	13
1	32	120	24	225 0	145	94	14
1 1/2	50	140	39	270	170	113	18
2	62	162	50	308	185	140	24
3	90	200	75	342	235	183	25

No.	Description	Material	Qty.
P1	Body	Polypropylene	1
P2	Strainer	60 Mesh PP Screen	1
P3	Cover	Polypropylene	1
P4	Cover Gasket	Neoprene	1
P5	Adaptor	Polypropylene	1
P6	Flange	Polypropylene	1

Manufactured using high grade polypropylene, our range of PP ball valves thread end are known for stress tolerance, surface hardness and corrosion resistance. We offer these valves in varied sizes and specifications and can also customize as per the specific requirement of the clients.

Technical Specification:

Construction	3 piece design, 1 piece stem (spindle), full bore, Teflon seated
Standard	As per manufacturer's
Connection End	Screw end (BSP thread)

M.O.C. Available

• PP (Polypropylene)
• PVDF (Polyvinylidene Fluoride)
• HDPE (High Density Polypropylene)

Size Inch	MM	OD	ID	D1	T	L	H H1
1 - 2	15	33	19	1 - 2	17.5	114.5	72	131
3 - 4	20	36.5	24	3 - 4	21	128	72	131
1	25	47	30	1"	28	135	93	161
1 1/2	40	63	45	1 1/2'	31	153	112	205
2	50	83.5	57	2"	38.5	190	125 0	205
2 1/2	65	95	71	2 1/2'	41	235	142	262
3	80	105	84	3"	84	261	148	262
4	100	120	109	4"	109	312	166	335

No.	Description	Material	Qty.
P1	Body	PP/PVDF	1
P2	Side Piece/Connector	PP/PVDF	2
P3	Ball	PP/PVDF	1
P4	Stem/Spindle	M.S./S.S./PP/PVDF Coated	1
P5	Seat Ring	PTFE	2
P6	Connector Seal	Neoprene Rubber / PTFE / PVC	2
P7	Stem Seal Ring	PTFE	1
P8	Stem O-Ring	Neoprene	1
P9	Stud, Nut & Washer	M.S. (En8)/S.S. 316	Req.
P10	Nut Cap	PP	Req.
P11	Handle	M.S. PP Coated	1
P12	Handle Hex. Pin	M.S. (En8)/SS. 316	1
P13	Handle Cap	PP	1

Technical Specification:-

 Construction: - Single Piece Body

 Standard:-As per Manufacturer’s requirements

 Connection End:- Flange end as per ASA 150#, BS 10 ( Table D)

# Available M.O.C

PP ( Polypropylene ) , PVDF ( Polyvinylidene Fluoride )

Dimension (mm)

Size (inch)	mm	A	B	C	D	E	F
6"	150	272.0	150.0	59.0	22.0	241.0	375.0