Dies & Mould Tools for Plastic Mould

Die Spring - Italy ISO - 10243/JIS - 5012

We are a well noted manufacturer and supplier of a wide range of Die Springs. These springs are manufactured using high grade raw material that are die casted using modern and high tech machines. Widely used in press tools, moulds, pressure and die-casting these die springs are known for high force low compression and optimum quality.

For Details, Refer Attached PDF

• Material : Steel class 5.8

• Surface treatment : Black oxidation

• Ball : Hardened and polished stainless steel

For details, refer attached pdf

We are affianced in providing an extensive gamut of Parting Locks to the customers. These products are extensively used in moulds for pulling the plates to a desired limit. Our uniquely designed products act like a puller. Owing to the use of premium quality raw material, these products are highly effective & offer high performance to the patrons. Moreover, these are products can be availed at market leading prices by the clients. 


FOR DETAILS, REFER ATTACHED PDF

With our commitment towards quality, we are offering a comprehensive array of taper interlocks. These interlocks are designed and developed by a diligent team of engineers following international quality standards. All the offered products are stringently checked by the quality auditors of our firm on various parameters. Moreover, clients can avail these products at market leading prices from us.


For details, refer attached pdf

Dia nipple for plastic injection moulds

• We deal 5/16" 3/8" 1/2" bsw threads x 50. 00 mm long & also l type nipple.
• Water cooling dia nipple
• MS & brass nipples used in the plastic injection moulds.  

We offer superior quality guide bush that are manufactured from good quality raw materials ensuring their effective performance. High level of durability and hardiness make these valve guide widely appreciated and accepted by our customers. In addition to this, these valve guide can be availed in different sizes as per the specific needs of our customers.


For details, refer attached pdf

Ball cages are made with precision bearing quality steel balls and they are arranged in close helical form for easy axial movement.


For details, refer attached pdf

• " Blue tube " Camlin Ltd.  Die - mould  impression paste.
• Size:-  Packing.  9 ml 10 Tube.20 ml 3  Tube.60 ml 2  Tube.120 ml 1  Tube.
• New packing: 250 grm Tin / Plastic500 grm Tin / Plastic.

Casts can be made of the wax model itself, the direct method; or of a wax copy of a model that need not be of wax, the indirect method. These are the steps for the indirect process:

 

1. Model-making. An artist or mold-maker creates an original model from wax, clay, or another material. Wax and oil-based clay are often preferred because these materials retain their softness.
2. Moldmaking. A mold is made of the original model or sculpture. The rigid outer molds contain the softer inner mold, which is the exact negative of the original model. Inner molds are usually made of latex, polyurethane rubber or silicone, which is supported by the outer mold. The outer mold can be made from plaster, but can also be made of fiberglass or other materials. Most molds are at least two pieces, and a shim with keys is placed between the two halves during construction so that the mold can be put back together accurately. In case there are long, thin pieces sticking out of the model, these are often cut off of the original and molded separately. Sometimes many molds are needed to recreate the original model, especially for large models.
3. Wax. Once the mold is finished, molten wax is poured into it and swished around until an even coating, usually about ¹⁄₈ inch (3 mm) thick, covers the inner surface of the mold. This is repeated until the desired thickness is reached. Another method is filling the entire mold with molten wax, and letting it cool, until a desired thickness has set on the surface of the mold. After this the rest of the wax is poured out again, the mold is turned upside down and the wax layer is left to cool and harden. With this method it is more difficult to control the overall thickness of the wax layer.

Our clients can avail from us sprue bush, remmer & files that are available in various designs and models at most competitive prices. These brushes are developed utilizing high-tech machinery and premium raw material that we source from authentic vendors of the market. Moreover, our products are known for their longer functional life, corrosion & abrasion resistance and dimensional accuracy.

For details, refer attached PDF

• HSS Taper Remmer Sp. for Sprue Bush.
• Sizes:- Ex - Stock.
• 3.00 mm Dai X 6.00 mm X 110.00 mm long
• 3.00 mm Dai X 8.00 mm X 110.00 mm long 
• 3.00 mm Dai X 10.00 mm X 110.00 mm long
• 3.00 mm Dai X 12.00 mm X 110.00 mm long
• Any special size req. as per drawing 
• Also make to Order

HSS punches, ejector pin, sprue bush, blue steel wire, dowel pin, ball cages, dia spring - Italy, polyurethane,guide pin bush, dia nipple, eye bolt.

• H.S.S. PSB / Precision Piercing Punches:- Type-A,B,C & D.[ Punches / Sleev / Bush / H.S.S. Blade & Flat Tool Punches.] Ejector Pins, Step,Sleeve and Blade Type
• Sprue Brush {Non-Harden}*Die Shinking Cutter & Taper Sprue Brush File. H S S Hardened Round Bar:- [ M - 2 grade 6 - 5 - 2  ground & unground ]   0.3 to 0.9 X 750mm to 1000 mm long precision drawn.UN.GR0UND. 1.00 mm to 3.6 mm X 2000 mm long..precision drawn.UN.GROUND. 1.00 mm to 13.00 mm X 2000.00 mm long UNGROUND & GROUND.  
• Special Springs - Italy Die Spring - ISO-10243.      
• Blue Steel Wire:- 0.5 to 10.00 mm Dia X 4.1/2 & 6" long
• Polyuerenthane Rod, Tube & Sheet.
• Ball Cages - Brass & Aluminum.  
• Guide Pin & Guide Bush as per Drawing
•  Pentographer" H.S.S.Round Tools,Belt,Carbide Round Tools, Collet, Cup Wheel - White,Black,Green & Carbide.
• "CARBIDE" Brazed Tips Tools,Tips,Square,Flat & Rd. Tools.
• "CARBIDE" Wire Draw Die - Wire Cut  Job Work As per Yr. Order
• Specialist in:- Carbide Rod Grinding & Resharpening of Tools
• Socket Head Screw - Unbrako-TVS
• BLADES:-H.S.S. & Bi-Metal {Flexiable} Sandvik.Sanda.Morse.Eclipse
• " RABRO " Stamp Punch Letter/Figur. ABC - 123 positive/reverse.

• Ejector Pins, Step,Sleeve and Blade Type. 
• Sprue Brush {Non-Harden}
• Die Shinking Cutter & Taper Sprue Brush File.         
• SPECIAL SPRINGS* - Italy..Die Spring - ISO-10243.       
• Blue Steel Wire:- 0.5 to 10.00 mm Dia X 4.1/2 & 6" long.               
• Polyuerenthane Rod, Tube & Sheet.       
• Ball Cages - Brass & Aluminium.       
• Guide Pin & Guide Bush as per Drawing.
  "Pentographer" H.S.S.Round Tools,Belt,Carbide Round Tools, Collet, Cup Wheel - White, Black, Green & Carbide
  "Carbide" Brazed Tips Tools,Tips, Square, Flat & Rd. Tools
  "Carbide" Wire Draw Die - Wire Cut ..Job Work As per Yr. Order
  Specialist in:- Carbide Rod Grinding & Resharpening of Tools
  Socket Head Screw - Unbrako-TVS
  Blades:-H.S.S. & Bi-Metal {Flexiable} Sandvik.Sanda.Morse.Eclipse
  " RABRO " Stamp Punch..Letter/Figur.  ABC - 123 positive/reverse
  

We offer bushes of Brass, Aluminum, SS, Ms & Gun Metal. Available with us is a vast range of Brass Bushings that is widely used in various tools and machine parts. Our range is made using premium grade brass metal that enhances its durability and efficiency. Available in a variety of sizes and specifications, our range can also be customized as per the specifications of the clients.  

• Ejector Pins Features of Ejector Pins
• (Round, Straight - cylindrical Head) 
• Material – Core hardened 55degree (+3) HRC Hardness of HDS is 40 - 50 degree HRC while surface hardness is at 650 RC duly mitrided, smooth finished. 
• Table of ranges available with us – 1mm to 20mm with length variations from 100mm to 1000mm. These are available in different types which are as follow : 
• HDS Ejector Pins : Known for highest precision and constant quality, our HDS ejector pins ensure a trouble free and accurate operation. These are straight hardened, tempered, ground, nitrated and lapped. The core hardness of these pin is maintained at 450 ± 3HRC with hardness 950 HV approx 68HRC only for top layer of approx 0.015mm. Step Ejector : Our step ejector pins can effortlessly take out the molded product after its solidification. Procured from reliable vendors, these are trouble free pins and smoothly run