Patel Brothers

The emboss type numbering arrangement on male and side of female part of the temper proof seal is itself in the mould and the constructive numbering is obtain in all The temper proof seals by automatic arrangement of numerator counter inserted in mould itself.

Then these temper proof seals are tested by pullout test, Acidic test and then we shall supply as per client requirements and i.e. arranging in serially, tide with the steel wire forming a loop and the same shall be packed in polythene bag with labels furnishing sr. nos. of seal, packed in corrugated box.

Production - Novelness of products

1. These seals are made up of plastics (Polycarbonate) which have a melting point of 270 degrees centigrade and have transparent property so tempering can be easily detect.

2. These seal are having a toolless Anchor type double locking arrangement with molded Stainless Steel wire in male & female part of seal so that male and female part of seal can't be separated after locking. The toolless Anchor type double locking mechanism makes it easy and fast to fit.

3. These seal have emboss type seven digit unique numbering of male and side of female part and have arrangement of providing company logo on both side of female part.

4. These seals are having properties to withstand in all whether conditions. It can withstand upto 145 degrees centigrade of temperature without deformation and deterioration.

5. These seals are withstood in the acid test to stop the tempering of the seals.

6. No extra sealng wire is required for the seal, increasing the operational efficiency.

PRODUCTION CAPACITY 1 LAC SEALS PER DAY

QUALITY POLICY

We at “PATEL BROTHERS” are committed to

Meet customer requirements to achieve customer satisfaction.
We shall try to maintain our position as one of the leaders in Temper Proof Plastic Security Seals manufacturers.

This we shall achieve through the Continual Improvement in Quality Products, Process & System with involvement of all employees & up grading of their skills.

Date: 01.05.05 Managing Partner

We see quality as a second nature. We have earned a ISO 9000 and our operations run according to the designed system. The top management is actively involved in the implementation and upkeep of the system designed, to provide the benefits of ISO 9000 that reflect in our products and are transferred to our clients.

We focus on three areas of Quality.

People – Train and educate every employee for quality actions and consciousness.

Products – Products should be as per the customer requirement, and should go through a 100% checking before dispatch.

Processes – we have designed Systems and processes that are fool proof. Processes that make the difference in our style of working and there are almost no instances of surprises and fire fighting.

Because of the above focus, we are sure that the quality of our products reflect the practices employed by us within the premises.

We implement quality in Two Phases of Manufacturing.

Stage Wise – Starting from Raw Material Purchase, clubbing all the processes, there is a quality check point at every stage in production. This minimizes loss, at earlier stages.
Final Inspection – The products go through a thorough inspection before they are dispatched. Te specifications are each checked for through visual, Destructive and non-destructive testing.

What Do we Look For ???

We look for the causes of rejection rather than the aspect of rejection. Being an ISO 9000 Company, causes of rejection are collected and a statistical note of the same is made. We systemize the control of high frequency causes and eliminate the causes itself. Thus most of the causes are eliminated, leading to the best production cycles and the system is self – regulated rather than person dependent.

• MGVCL
• DGVCL
• PGVCL
• UGVCL
• ERDA LABORATORY
• TORRENT POWER
• DHBVNL
• Electrical corporation of India

Clientele

• MGVCL
• DGVCL
• ERDA LABORATORY
• TORRENT POWER
• DHBVNL
• Electrical Corporation Of India
• PGVCL
• UGVCL.

Aim

• Maintain and increase level of Security within the Manufacturing unit with close control on systems.
• Develop at least one new Security seal every six months.
• Improve on the existing products through market analysis and customer study.
• Train employees on a regular basis for the Job and attitude towards security within the organization

VISION

Become One Of The Most Competent Security Seal Manufacturer That Caters To A Number Of Security Needs.

MISSION

• Develop And Deliver Commercially Viable Tamper Proof Security Seals That Add To Business Profits.
• To Train And Develop Employees To Be Focused On The Company Goals.

GOALS

• Maintain and increase level of Security within the Manufacturing unit with close control on systems.
• Develop at least one new Security seal every six months.
• Improve on the existing products through market analysis and customer study.
• Train employees on a regular basis for the Job and attitude towards security within the organization

Quality Policy

We see quality as a second nature. We have earned a ISO 9000 and our operations run according to the designed system. The top management is actively involved in the implementation and upkeep of the system designed, to provide the benefits of ISO 9000 that reflect in our products and are transferred to our clients.

We focus on three areas of Quality.

People – Train and educate every employee for quality actions and consciousness.

Products – Products should be as per the customer requirement, and should go through a 100% checking before dispatch.

Processes – we have designed Systems and processes that are fool proof. Processes that make the difference in our style of working and there are almost no instances of surprises and fire fighting.

Because of the above focus, we are sure that the quality of our products reflect the practices employed by us within the premises.

We implement quality in Two Phases of Manufacturing.

Stage Wise – Starting from Raw Material Purchase, clubbing all the processes, there is a quality check point at every stage in production. This minimizes loss, at earlier stages.
Final Inspection – The products go through a thorough inspection before they are dispatched. Te specifications are each checked for through visual, Destructive and non-destructive testing.