Shot Blasting Machines

Single Door or Double Door Machine. In this type of machine casting or forging or aluminium cylinder head, which is to be cleaned must positioned on table and repositioned to assure complete cleaning of full surface. 

Component like electric motor body, clutch housing, water pump casing and other components which are frigle, which can not be tumbled can be successfully shot blasted in swing table machine. 

We offer following capacity:
900mm - 300 Kgs.
120mm - 800 Kgs.
1800mm - 2300 Kgs.
2400mm - 4500 Kgs.
Additional bigger size available on request.

Previously cleaning with chisel, hammer, wire brushes and screw drivers and other tools for cleaning and removing sand, rust was taking long time, with wheel type shot blasting machine surface finish is achieved in 10 to 15 minutes.

Some of the foundries are shot blasting 30 to 40 tons of castings in 12 hours.

Shot blasting improves quality, reduce rejection, saves power and cutting tool cost and adds to the profitability of foundry, forging shops and auto component manufacturers.  Many small scale units doing job work on this type of machines.

More than 400 swing table type machines are in operation in India and abroad.

Some of our customers are : -

• Bharat Earth Movers Ltd.,
• Indian Railways.
• Southern Alloy Foundries.
• Shanthala Spherocast Ltd.,
• Eicher Motors.

 

The Continuous Monorail Machine is designed for high production and 360 degree shot blasting of job. The job is loaded on specially designed fixtures (hanger) which is attached to over head loop. The hanger moves with the help of motor, line speed of monorail can be customized according to production and finish require. The job enters the blasting chamber and the hanger starts rotating in clock wise and anti clock wise direction. The abrasive wheel are kept at left side of the chambers (no of wheel depends on production required and size of the job) which throws shot with the help of centrifugal energy. After the blasting cycle get complete, automatically doors get open and hanger comes out of the chamber from other end. And second hanger get in to the chamber, these cycle is repeated. The advantage of these machines is while one hanger gets blasted in blasting chamber; person can load and unload from other hanger.    
The operation of the machine is completely automated. Once the Blasting switch is selected, shots will be fed automatically in blasting wheels.
The separation systems continuously segregate usable shots from dust, and other particles, unusable shots & debris. The usable shots are transferred in to the storage hopper for recirculation purpose. The abrasive from the storage hopper are transferred into the blast wheel unit through soundabrator valve to muffle the noise.  Dust collector system is also provided which suck dust from the blasting chamber, elevator, and separator.
We offer following Hook Load Capacity Machines:
500 Kgs / 1 Tone / 1500 Kgs / 2 Tones / 3 Tones

We offer 1, 2, 5, 7, 14, 28, 34 Cubic Feet Rubber Conveyor Or Steel Conveyor Tumblast Machine ( Capacity- 50 kg to 2500kg ). We manufacture wide range of tumblast shot blasting machine.  The design employs endless conveyor belt made of steel, links or rubber belts, which does not damage the job during tumbling, gives uniform cleaning, suitable for casting weighing 1 Kgs., to 100Kgs. or more. 

We offer 1 / 2 / 5/ 7 / 14 / 28 / 34 Cubic Feet Rubber Conveyor or Steel Conveyor.

Tumblast machine is more suitable for foundry, forging, shot peening and many other application:

* 20" x 27" (2 Cu. Ft.) Rubber Conveyor - 100 Kgs Capacity.
* 27" x 36" (5 Cu. Ft. ) Rubber Conveyor -250 Kgs. Capacity.
                                  Steel Conveyor - 350 Kgs. Capacity.
* 14 Cu. Ft. Steel Conveyor - 800 Kgs.
* 28 Cu. Ft. Steel Conveyor - 1500 Kgs.
* 34 Cu. Ft. Steel Conveyor - 2000 Kgs.

Blasting in Tumblast machine increases production, improves quality, reduce fettling cost, saves labour & power, cuts tooling cost and reduces rejection.  More than 600 tumblast machines are in operation in Foundry, Forging and with Auto Component manufacturers, Railways & Defence. 

Rugged design of this machine increases production, improves quality thus reducing the costs
27 X 36 Tumblast Machines (5 Cu. Ft.)
Capacity : Rubber Conveyor 250 kgs,
               Steel Conveyor 300 kg

Airless centrifugal Shot Blasting machine suitable for Cleaning, Forging, SG Iron Casting, Steel Castings.
Suitable for Cleaning Railway and Power transmission Casting.
Used for Shot Peening, Coil Spring, Gears etc. to increase fatigue life of the auto components

Super Tumblast 14 Cu. Ft.

• Capacity : Steel Conveyor 800 Kgs.
• Increased production
• Improved quality
• Reduced fettling cost, saves labour, spaces, saves power, cuts tooling costs & reduces rejection.
• Machine available with Steel Conveyor.
• Rugged one piece forged, hardened and stress relieved chain assures long life

We have been engaged in manufacturing Strip Cleaning Shot Blasting Machine which is used for descaling of carbon steel and stainless steel strips ranging from 350 to 1800 mm width. 

• Shot blasting speed : 2 meter to 15 meter/ min or more
• Eliminates pickling, surface is completely free of scale
• Machine can be installed in continuous process inline or offline
• Simple operation requiring minimum labour
• More than 10 installations are in operation
• Saves Pickling cost and reduces acid disposal problem.

We offer sand shot blasting machine for removeing rust, scale, from metal, glass, ceramics, plastics. Application includes deburring, discaling, peening, polishing, stress relieving, deflashing and cleaning of cstings and forgings.

We Offer blast room with Trolley to suit your job site 5 Tons to 50 Tons.

We have been engaged in manufacturing Strip Cleaning Shot Blasting Machine which is used for descaling of carbon steel and stainless steel strips ranging from 350 to 1800 mm width. 

• Shot blasting speed : 2 meter to 15 meter/ min or more
• Eliminates pickling, surface is completely free of scale
• Machine can be installed in continuous process inline or offline
• Simple operation requiring minimum labour
• More than 10 installations are in operation
• Saves Pickling cost and reduces acid disposal problem.

These customized machine design to handle mix work load of medium large components including fragile & irregular shapes. Small components can also be cleaned by loading into carrier basket. Machine can handle load upto 5000 kg/hanger or more.

In these machine job is put on hangers suspended from overhead Y shape monorail. The hangers rotate in clock wise and anti clock wise direction in blasting chamber and get blasted in 360 degree.

Number of blast wheel and blasting chamber size depends on product size and the desired production. The hanger can be customized to carry load upto 4 tons per hanger.

We offer following Cabinet Size Y Type Spinner Hanger:

1. 900 Width x 1300 Height
2. 1000 Width x 1400 Height
3. 1500 Width x 1500 Height
4. 3500 Width x  4500 Height

 

We have developed Wire Mesh Belt Machines for high production, versatile, multi size job. The machine is most useful in heavy duty application in Foundry, Stone industries.

Wire Mesh Belt Shot Blasting Machine are  machines are exceptional for 360 degree, absolute and continuous shot blasting of flat as well as large and very complex components. The machine is specially designed to blast the component from both top and bottom side in one pass. In these machine blast wheel are placed on both above and below the part as it passes through. The Wire Mesh Design is simple and requires less material handling.

The jobs placed on the wire mesh belt conveyor continuously enters blasting chamber and get cleaned passing through the blast chamber and then exit through the exist conveyor

Fully automated machine pipe blasting machine. With automated job handling system at inlet and outlet.