All the Cables are insulated with PVC Type 5 Heat Resisting 85°C Compound and sheathed with PVC Type 9 Heat Resisting compound suitable for Cables operating at a maximum conductor temperature up to 90°C, which exceeds the requirements of BS 6346 - 1997. Cables as per BS 6346 - 1997 and IEC 502 - 1994. Core identification by number printing on white cores.
Conductor : Annealed plain copper conductor solid as per class 1 and stranded as per class 2 of IEC-60228. * Circular solid conductor (Class 1).
Insulation : Solid extruded PVC / A as per IEC- 60502-1.
Color Code 2 Core : Red & Black; 3 Core : Red, Yellow & Blue; 4 Core : Red, Yellow, Blue & Black; 5 Core & above : Black Cores with Number printing.
Bedding : Extruded PVC compatible with the operating temperature of the conductor.
Wire armor : Galvanized Steel wire as per IEC-60502-1.
Outer sheath : Extruded PVC Type ST-1 as per IEC-60502-1, Flame retardant.
Applications Can be used indoors or outdoors in cable ducts, cable trays, conduits or underground locations under mechanical stresses in power and switching stations, local distribution systems, industrial plants and commercial buildings.
CU/XLPE/PVC/SWA/PVC is a XLPE insulated, PVC bedded, steel wire armoured and PVC sheathed auxiliary cable with circular, compacted and stranded annealed copper conductors complying with BS 6360 class 2. The cable is designed according to BS 5467. The armour is a single layer of galvanized steel wires. *Circular solid conductor (Class 1).
Single core solid PVC insulated cables manufactured As Per BS: 6004. Rated Voltage 300/500V for H05 V-U or 450/750 V for H07V-U
Description: Single Core Cable with solid annealed copper conductors, PVC insulated, suitable for voltage up to 1000 volt AC and up to 750V to earth DC
Conductor: Plain annealed circular copper conforming to IEC-228, class 1
Insulation: PVC type TI Ito BS-6746 rated temperature 70°C; also available PVC rated temp. 105°C
Applications: In dry rooms, in apparatus, switch and distribution boards, for laying in conduit on and under plaster and on insulating supports above plaster. Switchboard cabling and installations in machines (H05 V-U) Domestic and industrial installations (H07 V-U)
Remarks: We also manufacture this cable according to AS/NZS, SANS, VDE Standard and also can manufacture as per buyers specification.
This cable is designed for areas where the integrity of the electrical circuit is critical to maintaining the power supply. Applications can be found in: emergency lightings, control and power circuits, power stations, fire alarm systems, underground tunnels, communications systems, sewage treatment plants, lifts, escalators, and high-rise buildings.
Voltage rating: 600/1000V
Construction: Plain annealed copper, Mica tape fire barrier, XLPE Compound insulated, Unarmoured or Aluminium wires armoured, LSZH Compound sheathed cable
Mica Tape Fire Barrier, XLPE Insulated, LSZH Sheathed, Fire Resistant Cable (300/500v Single-Core)
Application: This cable is designed for areas where the integrity of the electrical circuit is critical to maintaining the power supply. Applications can be found in: emergency lightings, control and power circuits, power stations, fire alarm systems, underground tunnels, communications systems, sewage treatment plants, lifts, escalators, and high-rise buildings.
Construction *Copper conductor acc. to IEC, class 5 (tinned up to 16 mm2) *Separator tape (only for sections above 16 mm2) *EPR rubber insulation acc. to HD22, type El 4 *Elastomeric outer sheath acc. to HD22, type EM2 *Very good behavior to variations of outdoor temperature: mobile use: -25 ... + 50°C
1. Circular solid conductor (Class 1)* 2. Conductors 10 to 16 Sqmm circular stranded (Class 2). 3. 25 Sqmm and above shaped stranded conductors (Class 2). 4. All the Cables are Insulated with PVC Type 5 Heat Resisting 85°C compound and sheathed with PVC Type 9 5. Heat Resisting compound suitable for Cables operating at a maximum conductor temperature upto 90°C, which exceeds the requirements of BS 6346 - 1997 and IEC 502 -1994. 6. Cables upto and including 6 Sqmm generally to BS 6346 -1997 and IEC 502 - 1994. Cables, 10 Sqmm to 400 Sqmm conform generally to BS 6346 - 1997
Plain Copper Conductor (Cu/Pvc/Pvc Or Cu/Pvc/Nylon)
Definition: THHN: Thermoplastic insulated, High Heat resistant, Nylon Jacketed cable, 105° C dry locations.
Rated Voltage: Working Voltage up to 600V
Conductor: Annealed Solid or stranded copper wires
Insulation: Polyvinyl Chloride (PVC) Rated 105° C
Jacket: Nylon jacket provided over PVC insulation for protection from abrasions and scratches at the time of pulling through conduits. It also serves as a protective shield against oil, gasoline and chemicals.
Heat Resisting Pvc Insulated And Pvc Sheathed Flexible Cords
Voltage Rating: 300-500 volts (BS 6141) As per B.S. 6500/1994. Operating Temperature: Maximum 85°C Conductor Identification: 2 Core = Brown / Blue, 3 Core = Brown/Blue /Green-Yellow 4 Core = Brown / Blue / Black / Green-Yellow 5 Core = Brown / Blue / Black / Black / Green-Yellow
Construction: Flexible plain annealed copper conductor, heat resisting P.V.Cinsulated and heat resisting PVC Sheathed. Sheath Colors as per requirement.
Specifications As per UL-444, EIA/TIA 568 B Conductor Soild Annealed Bare Copper Conductor Insulation Extruded Soild polyethlene. Assembly Pairs twisted with staggered lay technique. Twisted pairs are bundled into units of 25 pairs ( subunits comprise 12/13 pairs) and cabled and covered with a polyester tape binder. An aluminum Mylar tape is appleid with an overlap for 100% coverage with a tinned copper drain wire. Outer sheath Grey Colored flame retardant PVC. Applications Used for voice, data and local area network application up to 16 MHz.
Specifications As per UL-444, EIA/TIA 568 B Conductor Soild Annealed Bare Copper Conductor Insulation Extruded Soild polyethlene. Assembly Pairs twisted with staggered lay technique. Twisted pairs are bundled into units of 25 pairs (subunits) Outer sheath Grey Colored flame retardant PVC. Applications Used for voice, data and local area network application up to 16 MHz.
Application For the transmission of high currents from the electric welding machine to the welding tool. Suitable for flexible use under rough conditions, on assembly lines and conveyor systems, in machine tool and motor car manufacturing, ship building, for manually and automatically operated line and spot welding machines.
Standards As per BS638 Part 4
Conductor Class 6 extra flexible plain copper conductors to BS EN 60228:2005 (previously BS6360)(Class 5 flexible plain copper conductors for 120mm2 and above)
Insulation EPR (Ethylene Propylene Rubber) to BS7655
Sheath HOFR (Heat and Oil Resistant and Flame Retardant) Sheath to BS7655
Sheath Color Black
Voltage Rating100V (450V for non-welding applications if suitably protected from mechanical damage)
All automotive wire is made up of a number of strands of copper wire. Needless to say, the more current the wires are required to carry, the greater the number of strands it needs, so a cable designated 28/0.30 is made up of 28 strands of wire, each measuring 0.30mm in diameter. The following table shows the various sizes and the general use of the wire.
Payal Automotive cables are also manufactured as per the conventional sizes prevailing in the market where the copper and the PVC insulation meets the above standards requirements and impervious to water, oil, petrol, acid and greases.
Payal Automotive cables are supplied in standard lengths of 25 or 30 mts in carton boxes. However customer specified lengths can also be supplied.
Annealed bare/tinned high conductivity copper, PVC/PE/Cellular PE insulated. Insulated cores twisted to form a pair. Pairs laidup in sub-units/units in concentric layers. Taped. Overall PVC sheathed. Individual and or overall shielding with Aluminium-Mylar tape/copper tape/lapping/braiding provided depending upon the requirement. Armouring provided with an extruded inner PVC/PE sheath and overall sheath of PVC/PE wherever required.
ABC-aerial bundled cables with aluminium conductor for 1 kV overhead system has been manufactured by Payal Cables.
Sizes and insulation in accordance with customer’s specifications will be manufactured by request.
The use of ABC cables in low voltage networks provides important saving in installation costs, while it ensures the same reliability and safety, replaces bare conductors in overhead distribution lines and increased very rapidly all around the world.
Temperature Range -20ºC to +80ºC Specifications As per UL - 444 Conductor Solid Annealed Bare Copper Conductor. Insulation Polyethylene core insulation. Assembly Pairs twisted with staggered lay technique. Color coding is as per table 1. Twisted pairs are bundled into units of 25 pairs (subunits comprise 12/13 pairs) and cabled and covered with a polyester tape binder. Outer sheath Grey Colored flame retardant PVC. Applications Can be used as a service and installation cable in data transmission applications, computer, telephone etc.
Application: For fixed installation typically in fire alarm and emergency lighting circuits where circuit integrity must be maintained. For installation where fire, smoke emission and toxic fumes create a potential threat to life and equipment.
Standards: As per BS 7629-1BS 6387 C W ZBS 5839-1 clause 26.2BS EN 50200 PH30BS 8434-1
Bright annealed bare copper of high electrolytic grade drawn to fine strands, multi strands bunched together rope shaped wire for uniformity of conductor dia, resistance, dimensions and flexibility etc. The diameter of the conductor is so uniform that strands do not get cut when stripping the insulation thus conductor gives perfect conductivity which eliminates spot heating and sparking.
Specially formulated grade of PVC compound is capable of withstanding higher conductor temperatures with flame retardant properties. A rating of 105°C with FR properties enables the cable to withstand overloads without compromising safety. The insulation is resistant to boiling water, steam and vapors to prevent aging and cracking in practical usage in kitchens, bathrooms, damp walls, chemical industries etc.
The Cable are printed with generic marking PAYAL - FRHR