We offer a comprehensive range of Gas purification and control systems. We provide our product range in standard as well as customized specifications. The main features of our range of products are:


•Compact Design with Wall Mounted & Powder Coated
•Easily detachable filters
•Deliver Ultra High Pure (UHP) grade gas
•Suitable for 10kg/cm² inlet pressure & 7 kg/cm² outlet pressure
•LC-MS-MS Panel
•Gas Filter Station can be customized
•1/4" or 1/8" Fittings & Tubings for each Gas Line

Advantage:
•Increase column life, GC detectors & reduces flame problems
•Improve reproducibility
•Toggle valves & gas distribution panel save costly gases
•Reduce baseline noise, drift problems, etc.

Application	Filter Type	Max. Inlet Impurity Level	Max. Inlet Impurity Level	Length End to End	Capacity
Moisture Removal	Silicagel / Molecular	20ppm	< 3ppm	10	210 CC
Hydro Carbon Removall	Activated Charcoal / Carbon	10ppm	< 2ppm	10	210 CC
Oxygen Removal	De-Oxo Chemical catalyst	10ppm	< 2ppm	8	125 CC
Partical Removal	Micron Filter	25	< 0.5	2

We offer wide assortments of Zero Air Generators for GC/TOC in different specifications for different industries. These ranges can be customized also as per the requirements of clients. The salient features of these products are:


•Fully Automatic System
•Constant delivery of pressure & flow
•Used Special Grade Adsorbant
•Quick & Easy Maintenance of the System
•Deliver Low Dew Point Dry Air

Applications
•A.A.S. / Flame Photometer
•Gas Chromatography & TOC Analyser
•Auto Samplers & Head Space Sampler for Analytical Instrument
•Chemical Analyzer
•N2/O2 Generator

Principle Specifications	ZAG-02(For 2.5 GC)(For Imported GC)	ZAG-03(For GC Analyzer)
Moisture	< 2ppm	< 0.5ppm
Total Hydro Carbon	< 2ppm	< 0.3ppm
CO & CO2	< 2ppm	< 0.2ppm
Purity	100.00%	100.00%
Micro Particulates	< 0.01	< 0.01
Capacity of ZAG	4 LPM at 4kg/cm2	1 LPM at 4kg/cm2
Method of Purification	PSA	PSA & HC furnace
Room temperature	5 C - 50 C	5 C - 50 C
Start up time	5 minutes	30 minutes
Electrical requirements for ZAG	230V AC, 50Hz, 1ph 4Amp	230V AC, 50Hz, 1ph 5Amp
Size of ZAG(in mm) without compressor	495H x 405W x 280D	500H x 405W x 420D
Net weight of ZAG without compressor	35 kg	40 kg

We manufacture and provide Nitrogen Air Gas Generator, which are efficient and effective for longer duration work. Th salient feature of these Nitrogen Air Gas Generators is:

•Fully Automatic Programmable System
•Deliver constant pressure & flow
•Fully regenerative, durability with PSA technology
•Effortless and easy operation
•Easy Maintenance and space saving
•Improves instrument performance

Application:
•FTIR/IR/AAS, ELSD detector
•GC-MS, LC-MS-MS, ICP / NMR
•GC-FID, FPD, NPD, TCD, AED
•Thermal Instruments, Turbo Evaporator (N2 Concentrator)

Principle Specifications	NG-03	NAG-02
Moisture	< 2ppm	< 2ppm
Oxygen	< 5ppm	---
Total Hydro Carbon	< 0.5ppm	< 0.5ppm
CO & CO2	< 2ppm	< 2ppm
Purity	100.00%	100.00%
Micro Particulates	< 0.01	< 0.01
Capacity of	500ml/min at 5kg/cm2	4000ml/min at 5kg/cm2
N2 / Air Generator
Method of Purification	PSA & Depressurisation	PSA
Room temperature	5 C - 50 C	5 C - 50 C
Start up time	1 hr / Programmable by timer	10 minutes
Electrical requirements for NG-03 & NAG-02	230V AC, 50Hz, 1ph 5Amp	230V AC, 50Hz, 1ph 5Amp
Size of Generator (in mm) without compressor	685H x 550W x 485D	---
Net weight of generator without compressor	40 kg	---
Net weight of generator with compressor	50 kg	---

We manufacture Nitrogen Air Gas Generator For Turbo Evaporator which are durable and efficient. The salient feature of these Nitrogen Air Gas Generator For Turbo Evaporator are:

•Deliver constant pressure & flow
•Deliver low Dew Point of N2 Gas
•Used Special Grade Adsorbent
•Easy Maintenance of the system
•Fully Automatic System
•Low Pressure Drop

Applications:
•FTIR / IR / AAS Purging
•Gas Chromatograph
•GC-MS, LC-MS-MS, ICP
•Turbo-Vap Evaporator (Zymark)/Nitrogen Concentrator
•All Analytical Instruments

Principle Specifications	NG-T	NG-L
Moisture	< 2ppm	< 2ppm
Oxygen	< 5ppm	---
Total Hydro Carbon	< 0.5ppm	< 0.5ppm
CO & CO2	< 2ppm	< 2ppm
Purity	100.00%	100.00%
Micro Particulates	< 0.01	< 0.01
Capacity of	500ml/min at 5kg/cm2	4000ml/min at 5kg/cm2
N2 / Air Generator	----	-----
Method of Purification	PSA & Depressurisation	PSA
Room temperature	5 C - 50 C	5 C - 50 C
Start up time	1 hr / Programmable by timer	10 minutes
Electrical requirements for NG-03 & NAG-02	230V AC, 50Hz, 1ph 5Amp	230V AC, 50Hz, 1ph 5Amp
Size of Generator (in mm) without compressor	685H x 550W x 485D	---
Net weight of generator without compressor	40 kg	---
Net weight of generator with compressor	50 kg	---

We design and manufacture a wide range of Hydrogen Gas Generators. These are available in various specifications and we also provide customization to our range of products. The salient features and functions of our Hydrogen Gas Generator are:

•Long Service life of electrolysis pool
•Widely applied to various types of Cromotography
•Simply operation
•Low energy consumption
•Liquid level is clearly showed by floating ball
•Larger square of electrolysis separtion pool, rotational whole structure
•Low pool temperature

Principle Specifications	SGH-300	SGH-500
Max Hydrogen Flowrate	300ml/min	500ml/min
Delivery Pressure	0-60 psig	0-60 psig
Purity	> 99.999%	> 99.999%
Power Consumption	150w	180w
Power	198-242V (AC);50Hz	198-242V (AC);50Hz
Min / Max Temperature	5-40 C	5-40 C
Max Ambient Humidity	< 85% RH	< 85% RH
Suitable Environmet	non-corrosive & dust-free	non-corrosive & dust-free
Dimensions	420L x 210W x 350H (mm)	420L x 210W x 350H (mm)
Weight	12 kg (approx)	12 kg (approx)
Fluid Tank Capacity	1.5 L	1.5 L
Fluid Consumption	Weekly or when level fall below 0.6	Weekly or when level fall below 0.6

We offer varied range of efficient and effective HPLC Column Oven. Available in different specifications, these can also be customized as per the varied requirements of our clients. The salient features of our HPLC Column Oven are:

•Accepts Varieties of Column Sizes
•Digital Temp. of set & actual display
•Precise Temperature Control
•Assures Safe, Accurate Control action
•Insures Reproducible Analysis

Applicable input	PT-100, 2-Wire
Temprature Range	Ambient 5 C to 100 C
Displays	4-digit seven-segement LED display for process value (PV) & Set Value (SV)
Accuracy	0.1
Resolution	0.1 C
Stability	0.1 C
Stabilisation Time	15 min
Control action	Complete PID Controller with low & high Temperature Calibration Facility, PID parameters and temperature Overshoot (Settable) Facility
Sensor fail / break	No power to oven Heater & 'SO' indication on front display
Control Output	3 Amp SSR Output, 230V, resistive load
Status Indication	By 2LEDs (Heater ON, Alarm / Buzzer ON)
Keyboard	Feather touch keys
Programme Memory	Non-Volaile memory for set temp. & other parameters
Power Supply	230 VAC + / - 10%, 50Hz, 120VA
Oven accommodate	30 cm Long Column or Small Columns with guard column
Oven Heating Type	Block Heater Type / Air Circulation Type
Oven Mounting	Vertical or Horizontal
Size (for HCO-02)	100 x 100 x 410 mm
Weight	4kg to 15kg as per selection of model

We provide a range of Ultrasonic Bath or Sonicator in various specifications with customization facility. The salient features of these Ultrasonic Bath are:

•Easy to operate
•Made of one piece S. S. Tank
•Indigenously manufactured with advanced MOSFET technology
•Auto-tuning facility
•Digital tuning of Transducers to avoid any frequency shifted
•Compact, rugged and highly durable
•Extensively protected electronic circuits for safer operations

Technical Specification:
•Operating frequency 33 3KHz
•Input Voltage range of 170V AC - 270V AC, 50Hz, 1Ph
•Micro Controller based timer with range 0 to 30/99 minutes
•Thermostatic controlled temperature controller

Capacity	Tank Size (LxBxH)mm	Overall Dimension (LxBxH)mm	Wattage
1.5Lit	240x135x65	265x160x180	60W
3.5Lit	300x150x100	330x175x250	120W
6.5Lit	300x150x150	450x2000x350	200W
9Lit	300x200x150	450x300x375	250W

We offer a wide range of IR/FTIR/XRF accessories which includes Hydraulic Press, KBr Die Set, Pallet Holder, Universal Cell Holder, Nacl/KBr Windows, Dry Box etc. These are used in various engineering applications. Our range of IR/FTIR/XRF accessories can also be customized as per the specifications provided by our clients.

We offer varied range of AAS Accessories such as N2O with Pre Heater, Acetylene, Air Compressor, Gas Control Box for Air, Air Filter etc. Widely applicable in various engineering works, we offer our range of products in different specifications in order to cater to different industries. We also provide customization of our products to meet specific requirements.

We provide PIR for HPCL, which includes Solvent Filtration Kit and Sample Filtration Kit. The Solvent Filtration Kit are used for used for the filtration of mobile phase for HPLC. Our range of Solvent Filtration have Glass/S. S. Nylon-66 membrane filter of 47mm x 0.45. Our Sample Filtration Kit consist of Syringe & Nylon 66 membrane filter of 13mm x 0.2. These are widely used in filtration of sample for HPLC.

We offer a wide range of CG/Multichannel Temperature Controller with various specifications. We also provide customization of products as per the client's preferences. The silent features of our range of products are:

•Complete Micro Controller and PID Operations
•Controls Oven, Injector, FID and TCD Temperature
•Safe & accurate control operation
•Temperature Overshoot & Calibration Functions
•Can be connected to any GC Make / Model or any analytical Instrument

Applicable input	PT-100 Sensor / as required
Operaing Temprature	5 C above ambient to 400 C with increment of 0.1 C for Injector, FID, Auxillary Port
Temp. Programmer for Oven	5 C above ambient to 400 C with Isotherm & 9 ramp rates in steps of 0.1 C/min to 30 C/min with 9 hold times
Accuracy	+ 0.2 C
Resolution	0.1 C
Control Action	Complete PID Controller
Display (LCD)	Set & actual temp. indication for all Channels Simultaneously, method no., programme step (ramp or hold) status & oven door status indication (open / close)
Indication (LED)	Indication for heater On / Off & alarm
Keyboard	Feather touch keys
Safety Limit	Temp. Cut-off-facility (Overshoot Facility) for all channels that can be set by user
Sensor fail / break	No power to Heater & 'SO' for open & 'SS' for short indication in front temperature display
Programme Memory	Non-Volatile memory for set temp. & parameters
Power Requirements	230 V AC + / - 10%, 50Hz, 100W
Size of Controller	92 x 196 x 220 mm
Net Weight	2 kg

We design and manufacture a wide collection of Digital Gas Flow Meters. These Digital Gas Flow Meters can be customized to cater to varied requirements of our clients. The salient features of our range of products are:

•Digital Display of LED / LCD
•Microcontroller Based
•Direct Digital Readout
•Useful for measuring any gas flow rate
•Highly Accurate and fast readout
•Free of Operational & Human errors
•Easy to Operate

Flow Range	DFM-01 : 1 ml/min. to 50 ml/min. DFM-02 : 5 ml/min. to 500 ml/min. DFM-03 : 200 ml/min. to 3000 ml/min. DFM-04 : 1 ml/min. to 500 ml/min.
Accuracy	+ / - 2% of Reading, + / - 1 Digit
Power Supply	230 V AC, 50Hz, 10W
Resolution	0.1 ml/min. & 1 ml/min.
Dimensions	27H x 13L x 10D cm
Optional Attachment	Battery Operated Rechargeable System