Our range of HRC fuse links are built to offer overload & short circuit protection of low & medium voltage circuit in industrial installation. These HRC fuse links are ideally suitable for back-up protection to motor Starters, MCCB and other such equipment against short circuit and overloads. Our HRC fuse links are light in weight and have compact dimensions.

HRC fuse links offered by us are widely accepted in the market due to the following features:

• Conforms to IEC 269, BS 88 and IS 13703-1&2-1993 Standards.
• Low watt loss results in low temperature rise and considerable power saving.
• High grade of steatite (Porcelain) used the body of fuse link.
• High resistance to aging
• Current range - 2A to 32 A; Breaking Capacity - 80 KA at 415 V AC.

We offer superior quality HBC fuse-links, which are used within high power converters as fast protective devices against possible explosions, which might occur in the case of failures. These fuse links are extensively used for distribution, control circuits & general applications. Available in wide range these fuse links conforms to IEC269, BS 88 and IS 13703 - 1&2 – 1993 standards.

Some of the features, which our range of HBC fuse links comes with are:

• Conforms to IEC 269, BS 88 & IS 13703-1&2-1993 Standards.
• Breaking Capacity - 80 KA at 415 V AC.
• Positive discrimination between upstream & down stream loads
• Non deteriorating characteristics.
• Current range - 2A to 32 A.

Our range of fuse holder are suitable for the usage in PNS / PT HBC fuse links and are designed and developed conforming to IEC269/IS13703. Technical specifications of our fuse holder are as follows:

• Voltage rating 415V AC
• Current rating 32A, 63A & 125A
• Front, Back & Busbar Connection types.

Our qualitative Push Button Elements are available in different specification and colors. These are developed using quality fiber and screws and extensively used in different industries.

Features:

•    Long operational life
•    Safe to use
•    Efficient performance
•    Shock resistance

Colour	Type	Cat No.	Unit Price	Unit Case
Red	NI	536	52-00
Yellow	NI	537	52-00
Blue	NI	538	52-00
Black	NI	539	52-00
Green	NI	547	52-00

Our bus bar insulators are offered in several standard lengths and diameters. These insulators arecmade from high electrical grade thermo-set, fiberglass reinforced polyester resins and are strong, shatter resistant, moisture and heat resistant.

It is manufactured from Dough Moulding Compound (DMC) which provides with flame resistant properties for superior insulation and are benchmarked to international designs for demanding applications. These insulators are furnished with precision threaded brass inserts or steel inserts as per standard dimensions or customer specification to sustain repeated connection stresses and to reduce voltage gradients at the screw. These insulators are intended for indoor use or in protective enclosures outdoor.

They are available in conical, octagonal, hexagonal and cylindrical shape in brick red colours for standard applications.

We offer extensive range of high quality current transformers providing measuring and protective class accuracies. Our range of current transformers are suitable for bus bars up to 40 x 12mm and round conductors up to 35mm.

Current transformers offered by us provide accurate measurement of high primary current and secondary current of 5A or 1A which is proportional to the main current.

Although our present range comprises of moulded case current transformers but if we are provided with samples and detailed specification we can make other forms of current transformers such as miniature, core balanced, tape wound and split core current transformers, integral transducers, etc.

We offer an exclusive range of led lamps which are used as a light source during power cuts. The lamp showcases extremely high performance and is available in many colors as per the requirements of the clients.

Colour	Type	Cat No.	Unit Price	Unit Case
Red	NI	542	47-00
Yellow	NI	543	47-00
Blue	NI	544	57-00
Green	NI	545	47-00

Contactor is specifically designed for the purpose of establishing or interrupting AC current circuit. Suitability varies depending upon frequency, rated insulation voltage and rated operation current.

Type	AC-3 Duty Rating At 415V, 50Hz	Max. 3 Phase Motor Output at 415V AC		Auxiliary Contacts	Cat No.	Unit Price (Rs.)	Unit Case
		KW	HP
PC 2	32A	15	20	2NO+2NC	PC 21502	1845	8
PC 3	40A	22	30	2NO+2NC	PC 21503	2448	8

We offer a wide range of over load relays. These are known for high performance and supreme quality. Our over load relays are available in different sizes and models as per the requirement and specifications as per the requirement of the clients. They are available at market's leading price and are delivered with in the given time span.
Some of the key features of our over load relays are as follows:

• High temperature resistance
• Corrosion resistance
• Durable

Relay Type PK-1 (Relay Setting Range in AMPS)	Cat. No.	Unit Price (Rs.)	Unit Case
0.60-1.00*	PC 21399A	310	10
1.00-1.60*	PC 21400A	310	10
1.50-2.50*	PC 21400B	310	10
2.50-4.00*	PC 21400C	310	10
4.00-6.50*	PC 21400D	310	10
6.00-10.00*	PC 21400E	310	10
9.00-14.00*	PC 21400F	310	10
11.00-18.00*	PC 21400G	310	10
13.00-22.00*	PC 21400H	310	10

We offer motor starter panels that are used to distribute power through the panel. Our technically advanced starter panels are designed to meet exact demands of the application area.

Max. 3 Phase Motor Output at 415V AC		Relay Range (A)	Cat No.	Type	Unit Price (Rs)
HP	KW
Up to 7.5	5.5	09/14/09	SMC10118	PK-1-DOL With ISI Mark	1098
7.5#	5.5	11-18/13-22	SMC10118	PK-1-DOL With ISI Marked Contactor	1098
7.5#	5.5	13-22 H	SMC10118	PK-1-DOL With ISI Marked Contactor	1197
10	7.5	10-16/11-18	SK10119	PK-1.5-DOL With ISI Marked PC-1 O/L Relay & PC-1.5 Contactor	2520
15	11	13-21/20-32	SK10119A	PC1.5 DOL with ISI Mark PC-5 O/L Relay & PC-1.5 Contactor	2880
20	15	20-32	SK10120	PC-2 DOL With ISI Marked Contactor & ISI Marked O/L Relay	3780
30	22.5	28-42	SK10121	PC-3 DOL With ISI Marked Contactor & ISI Marked O/L Relay	4770

Fuse Puller which can be offered with customized solution in accordance with client requirements. Manufactured of high quality raw material and advanced technology, the Fuse Puller is in demand for its high performance, durability and low maintenance.

Type	Cat No.	Unit Price	Unit Case
NI	546	160-00	10

We manufacture our main switches with cast iron sheet metal which have special chemical treatment with tow coats of protective paint and gives electrical stoving finish. The position of the operating handle clearly indicates whether the switch is in the on or off position.