Have a requirement?
Chat with us
Have a requirement?
Chat with us
Storage Systems
The personal locker with in-built locks and without in-built locks i.e, pad lock type having configuration depending on site conditions and the body size are 380 wide, 450 deep ,1800 high for 6 lockable doors, 760 wide, 450 deep , 1800 high for 12 lockable doors, 1140 wide, 450 deep , 1800 high for 18 lockable doors, 1520 wide, 450 deep , 1800 high for 24 lockable doors respectively.
The allowable dimensional tolerance for overall size of the Locker is (+ / - 5mm). Similarly in the angle bending (+ / - 3) in degree.
All the components are finished 40 to 50 microns thick epoxy polyester powder coating oven baked at 180 to 200 deg. centigrade temperature.
View Complete Details
Compactor Systems
Get Latest Price
Single Face Fixed Unit : This unit has a fixed body, which is accessible from one side, only the other side faces the wall or any other fixed structure and the back is covered.
Double Face Mobile Unit : Double face unit is facing fixed unit. This unit has a movable body, which can be accessible from both sides.
Single Face Mobile Unit : This unit has a movable body ,which can be accessible from one side only.
Harmony Systems’s compactors have configurations depending on site conditions and the available body sizes are
- 910mm wide, 455mm deep, 1980mm high for single bay system.
- 820mm wide, 455mm deep, 1980mm high for double bay system.
- 2730mm wide, 455mm deep, 1980mm high for three bay system.
In case of double face movable filing compactor total depth is 910mm .The height of each unit is 2080mm (including rail and under structure) from floor level after installation and width including the drive cover is 1895, 2805 mm for double and three bay systems respectively.
The allowable dimensional tolerance for overall size of the compactor is (+ / - 5mm). Similarly in the angle bending + / - 3 degree. Each body has 5 loading shelves (including the base of the compactor) and the shelves are adjustable at a pitch of approximately 25mm with suitable systems such as clips, nuts and bolts in standard compactor.
The compactor body is manufactured in such a manner that maximum height and width can be used to get the maximum capacity.
The compactor body which is the super structure is fabricated with integrated welded construction.
The cold rolled cold annealed (CRCA) steel sheets and strips and have six folds as per design.
The body has independent precision punches slotted strips welded at sides to support the shelves to ensure flexibility in adjusting the height of the shelves
Shelves are able to carry maximum load of 55kgs. UDL(Uniformly Distributed Load).
Suitable locking arrangement is provided with centralized locking on the last unit when all units are brought together.
View Complete Details
need
details