Construction Material

Perlite plaster is conite which is mineral based product with the major constituent being expanded perlite granules. It is obtained by high temperature expansion of natural mineral Perlite.

Bulk Density of Conite: 120-150 kg/m3 & with additional process; it can be even lighter.

Usage Of Conite - Used in construction projects where large ceiling span designed to reduce no. of columns & beams like Malls, Convention Hall etc. Such ceiling design helps to reduce noise level-waterproofing-slab lile roof with added advantage of lightweight insulated roof tops. - Approved as "Energy Conservation Code- India". - Wind uplift & seismic resistance -

Also added advantage of acoustical properties to reduce noise level -

Perlite Plaster: It is made at site from Conlite cement, air en-training agent & water. Cement should be standard company product & water used should be clean portable water. Conlite-portland cement based plaster can be used on new/remodel work-as a base coat for stucco finishes.

Conite Gypsum Plaster: Conlite plaster aggregate mixed with Gypsum to provide an ideal base coat plaster for interior walls, ceilings & for membrane fireproofing to underside of floor & roof assemblies.

Gypsum Perlite Plaster - Compressive Strength: 45-60 kg/cm2 - Setting time: 30 Min - Form/Mesh/Powder: 175-200 -

Area of Application: On bare brick wall, RCC ceiling surface smoothness.

Cement/Aggregate Ratio By volume 1.4 1.5 1.6 1.8

Oven dry density kg/m3 576 488 432 352

Compressive strength range kpa 2413-3447 1585-2344 965-1378 552-861

Wet density when placed kg/m3 808.0 32.0 728.0 32.0 648.0 32.0 584.0 32.0