We offer our clients high grade fire fighting pumpset - Mather and Platt procured from one of the leading pump manufacturer who holds vast industrial experience of 100 years. Mather and platt pumps  are trusted for their quality performance, rugged construction, better hydraulics and higher efficiency which provide power saving solutions hence widely demanded not only in India but in abroad because of its variety of applications.
Our wide assortment of fire fighting pumps include; vertical turbine pump, vertical sump pump, horizontal multi stage pumps, horizontal split casing pump, horizontal end suction pump.
 
In addition to this Mather & Platt is the pioneer in manufacturing of Fire Fighting Equipment & Systems and also possess in-house facilities for 70% of the equipments.
 
 
Some of its distinct features are given below:
 

• Pumps available in different type of construction for various TAC duties pumps for higher capacities and heads as per customer requirements such as Capacities: 96 m3/hr. to 616 m3/hr.,  Heads: 56 m to 105 m
• Accredited with ISO 9001 and ISO 14001 certification
• Pumps for handling corrosive liquids and sea water can be offered in special material of construction such as IS 2749 - 1974    Gr. AFG Ni 15 Cu 6 Cr 3 ASTM A 439 Type D2  BS3468- 1986   Gr. S2W ASTM A 744 CD 4 MCU CF 8 M, K Monel,  XERON 500, SS 316,SS316L, CF3M
• Pumps can be supplied with Mechanical seals
• Vertical Pumps can be supplied with Caisson pipe to protect pump from high velocity particularly in ports

We are engaged in exporting optimum quality high pressure pump-wilo as per the client’s requirement. The range offered by is fitted with standard seal and drive by the means of IEC standard Motors. Different components are used in the pump is appropriate for drinking water which is (KTW and WRAS approved) still it is corrosion resistant. Some of its additional features encompass:
 

• Additional bearing to take axial thrust in lantern
• Design variants include glandless Construction, Frequency Converter.
• All cast iron components with Cataphoresis Coating for long lasting corrosion protection.

 
Some its application areas include:
 

1. Fire Hydrant Systems
2. Boiler Feed Systems
3. Hot Water
4. Industrial Circulation System
5. Process Technology
6. Cooling Water Circuits
7. Washing
8. Pressure Boosting & Water Treatment

We offer qualitative range of submersible sewage pump –wilo procured from trusted and reliable vendor from the market. The range of pump is well known for its high efficiency and operational reliability with low operating cost.
 
 
 Its striking Features are given below:
 

• Patented macerator reducing the solid contents in to a fluid that can be easily pumped
• Clogging and blockage resistant
• Double mechanical seal and oil chamber
• Corrosion-proof stainless steel motor in 1.4404 (316L)

 
 
Application areas encompass:
 

1. Pumping domestic sewage containing faeces from individual buildings
2. Ideal for Hotels
3. Commercial   Complexes
4. Housing Complexes and many more

We export high grade and multistage end suction pump-wilo which caters to the requirement of general industrial applications, pressure boosting systems liquid transfer, chiller and many more. Our range is widely demanded in different parts of the country because of its following features:
 

• Compact construction
• Simple commissioning
• Drive through IEC standard Motors
• Relevant components are apt for potable drinking water and KTW and WRAS approved
• Cast Iron components with Cataphoresis coating for long lasting corrosion protection

The range of end suction pump-mather & platt is manufactured using qualitative raw material as per the international standard because they are procured from our reliable vendor who holds rich industrial experience in designing and manufacturing pump. These pumps are in demand due to its trouble free performance, low power consumption owing to better hydraulics and higher efficiencies with high casing pressures and for a very wide range of functions.
 
Range: Capacities Heads: Up to 750 nrVhr.  : Up to 170 m can be supplied in both horizontal and vertical configurations.
 
Metallurgy: Available in Cast Iron / onze combinations
 
 
Applications areas are given below:
 

1. Air Conditioning Plants
2. Building Services
3. Fire Fighting Systems
4. Irrigation / Sprinkler Systems
5. Paper Mills
6. Pharmaceuticals
7. Sugar Mills
8. Water / Effluent Treatment
9. Water Supply
10. General Purpose Requirements
11. Vegetable oil mills

We offer qualitative range of self priming non clog pumps- kirloskar not only in domestic market but in international market also. The range is renowned for its durable bearing, energy saving and excellent thermal reserve and designed at our state-of-the art facilities
 
Some of its exclusive features are given below:
 

• TEFC Cage Motors
• Class F Insultaion
• Temperature rise lilmited to Clas
• Energy Saving
• Low Noise & vibration level
• Diecast  Aluminium rotor
• Durable bearings
• Excellent thermal reserve
• Can be designed for Inverter Application

We are engaged in exporting exclusive range of flame proff motors- kiroloskar procuded from trusted and reliable vendor meting the demands of various industries. Our range is distinguished because of its striking features such as robust & ruggedly built with Cast Iron or fabricated construction, enclosures are hydraulically tested for a pressure of 10kg/cm2 (150 PSI) and specially designed top terminal box.
 
 
 Our range is approved by the following:
 

• Central Mining Research Institution, Dhanbad (CMRI)
• Director General of Mines Safety, Dhanbad (D.G.M.S.)
• Chief Controller of Explosives, Nagpur (C.C.E)
• Bureau of Indian Standard (BIS)
• Directorate General Factory Advice Service and Labour Institutes (DGFAS & LI) Mumbai

 
 
COMPLIES TO
 

• IS: 2148 : Flame Proof Construction
• IS: 325 : Specification for 3 Phase Inductionsss motors
• IS: 6362 : Cooling
• IS: 4691 : Protection by enclosure
• IS: 1231 : Dimensions
• IS: 12075: Vibration Level
• IS: 12065: Noise Level

We offer our esteemed customers highly energy efficient centrifugal monobloc pumpsets – Kirloskar which stand high on quality parameters, durability and efficiency. The range offered by us include Single stage & Two stage monobloc pumpsets, find different applications viz., water supply for domestic use in apartments, high rise buildings, hotels, commercial establishments & industries. It can withstand wide voltage fluctuations from 300-440 volts and designed to prevent overloading and motor burning.
 
 
Some of its distinct features are :  

• Suction lift up to 7.5 meters
• Top flat efficiency curve: minimum variation in efficiency in entire operating range
• Efficiency at par with internationally available pumps higher Up to 10 points than minimum required by Indian Standard specifications
• Models are with IP-44 protection, Models with IP-55 protection can also be supplied
• Class 'B' insulation
• Dynamically balanced rotating parts ensure minimum vibrations
• Replaceable wearing parts and hence longer life
• Designed to prevent overloading and motor burning
• Designed for automatic air release during priming 
   
  Applications areas include:
  
• Irrigation
• Industries, for clear water handling
• Water supply for domestic use in Apartments, High rise buildings, Hotels & Commercial Establishments

Range
 
Head Capacity:   5-22 meters   72.5-9.3 Litres per sec
Power Rating: 2.2kW to7.5kW (3.0 HP to 10.0 HP)
Material of Construction: Standard supply, Optional supply
Direction of Rotation: Anticlockwise, when viewed from suction side

We offer our range of self priming non clog pumps (SP coupled set) across the globe. These pumps are designed as per the international quality standard therefore its efficiency is up to 10 points higher than the minimum required by the Indian standard specification. Its features are given below:
 

• Can withstand wide voltage fluctuations from 300-440 volts
• Suction lift up to 7.5 meters.
• Top flat efficiency curve: minimum variation in efficiency in entire operating range
• Dynamically balanced rotating parts ensure minimum vibrations
• Replaceable wearing parts and hence longer life
• Designed for automatic air release during priming irrigating
• Industries-for clear water handling

 
Product specification
 
Range

Material of Construction: Standard supply, Optional supply
Head - 6 - 76 meters
Capacity - 37.0-2.0 Liters per sec
Power Rating   - 1.5kWto22kW (2.0 HP to 30.0 HP)
Direction of Rotation- Anticlockwise, when viewed from suction side
Approximate performance of 'KDS+/KDS++1 Series, 2 Pole, Monoblock Pumps at rated voltage, 50 Hz, Three Phase A.C Power Supply

We are one of the leading exporters of high quality submersible pump set- kirloskar. Our range is highly demanded in various industries designed as per the client’s specification. Its non overloading power characteristics ensure trouble free operation in the entire operating range. Some of its striking features are given below:
 

• Light weight and compact
• Higher efficiency in lower operating cost
• Unique design of impellers and diffusers leading to reduction in axial thrust on motor shaft
• Lower number of operating stages for a given performance
• Easy assembling, dismantling and repairing: because of hexagonal shaft design.
• Strainer is inside the housing, hence no chance of damage
• Can be installed with HDPE/UPVC/GI
• Flat efficiency curve ensures better performance in the entire operating range
• Can also be installed horizontally

 
Product specification
 
 Features of Motor

• The anti-friction bearing for axial/radial loads gives superior life to motor
• Potable and hygienic grade of oil-filled motor facilitates use of anti-friction bearings, (instead of journal bearing) ensuing smooth running and unproblematic operation of pump set
• Stator is easily rewindable

 
Motor Housing Motor Shaft Motor Top shield AN hardware
Stainless steel AISI410 Stainless steel Cast Iron (Ni plated) Stainless steel
driving  end able selection chart at rated voltage, 50 HZ, single/three phase motors (Considering ambient temperature, 40°c and 3% voltage drop
 
 
Insulation: Class 'P.
Wide voltage range: Single Phase-160V to 240V (Rated Voltage 220V) Three Phase- 280V to 440V (Rated Voltage 415 V)
Maximum starts/stops per hour: 30
 
Range
Head               : 7-248 meters
Capacity        : 320-05 liters per minute
Power Rating: 0.37 kW to 2.2 kW
(0.50 HP and 3.0 HP) for single phase
(0.50 HP - 5.5 HP) for three phase
Direction of Rotation - Anticlockwise, when viewed from the material of construction
 
 Features of Pump:
 

• Pump housing pump shaft suction bracket discharge nozzle stage bowl impellers
• Diffusers Strainer
• Made from stainless steel

The range of HID lamps – Philips offer by us is procured from our trusted and reliable vendor so as to ensure that we supply only qualitative product to our esteemed clients. High intensity discharge lamp is widely used for lighting warehouses, retail space, high or low bay lighting, street lighting. The range is available in multiple options as per the client’s specification and requirement. Its features encompass:
 

• Advance lighting solution
• Change the look and functionality of any room
• Bigger and brighter