Petron Pacific, Inc., Mumbai

Consisting of clean old alloy aluminum sheet of 2 or more alloys Free of foil, venetian blinds, castings, hair wire, screen wire, food and beverage containers, radiator shells, airplane sheet, bottle caps, plastic, dirt and other non-metallic items. Oil and grease not more than 1%. Up to 10% tale allowed.

It consists of old extruded aluminum of 1 alloy. Typically alloy 6063, 6061 or 7075. Materials must be free from iron, thermo break, saw chips, zinc corners, dirt, paper, cardboard and other foreign contamination.

Made of high strength copper alloy. Chamfered on both ends for easy driving. Permits fulls contact of the rods being connected. These corrosion-resistant couplings ensure long lasting low resistance, rod to rod connections. Available in 5/8”, ¾” and 1”

• High strength
• Consistency of physical properties
• Consistent coil characteristics with uniform winding
• Close tolerances on unit mass to length ratio
• Higher breaking loads
• Higher proof stress loads
• Higher fatigue and corrosion resistance
• Better performance at elevated temperature
• Lower relaxation losses

It is manufactured as per ASTM A421- 2005 & ASTM A881-2005 deformed P C wires or BS standards. They are used for pre-stressing & reinforcement of concrete. Also used in the construction & rail tie industry.

It consists of clean aluminum castings which may contain auto and airplane casting but no ingots and to be free of iron, brass, dirt and other non metallic items. Oil and grease not more than 2%.

It consists of mix yellow brass solids, including brass castings, rolled brass, rod brass, tubing, and miscellaneous yellow brass, including plated brass. Must be free of manganese bronze, aluminum bronze, unsweated radiators or radiator parts, iron and excessively dirty and corroded materials. Must also be free from any type of munitions including but not limited to bullet casing.