Pharma N Pack

General Specifications Of “The Bombay Engineering Works” Autocoater

Applications :
Coater type SCS can be used to coat pallets, granules and tablets.

Coater is designed for the application of :
Film coating with organic solvent.
Film coating with aqueous coating.
Sugar coating.

Salient Features :

• Automated process.
• Conforms to cGMP.
• Flexible batch operations.
• Product protective handling to prevent chipping of tablets.
• Complete separation of production and technical area.
• Extremely user friendly software and operation through PLC.
• Excellent mixing and tumbling by special design of baffles.
• Made up of entirely of S.S.316.
• Advanced CIP system.
• Treatment of exhaust air for pollution free operation.

General specifications of “the bombay engineering works” blister packing machine.

Blister packing machine
Model	150	300
No of track	single	double
PVC base film	124 mm	210 mm
PVC film thickness	0. 2 to 0. 3 mm	0. 2 to 0. 3 mm
PVC reel dia max	440 mm	440 mm
Aluminium foil width	120 mm	206 mm
Aluminium foil thickness	0. 02 to 0. 03 mm	0. 02 to 0. 03 mm
Total forming area	min. 25 x 110mm / max. 100 x 110 mm	min 25 x 210 mmmax 102 x 210 mm
Pack length	116 mm	200 mm
Pack width	100 mm	100 mm
Forming depth	16 mm	16 mm
Output	-	-
Packs/min	150	300
Tablets/ min	1500	3000
Powder requirement	4. 5 kva	8 kva
Compressed air equipment	60fbs. Per sq. Inch / 4 bar min operating pressure 540 n1/ min	60 fbs/sqinch/4 bar pr 540 n1/min
Cooling water equipment	120 ltrs / hr – 3 bar –18c20c	120 ltrs/hr @3 bar-18’c –20’c

General Specifications Of “The Bombay Engineering Works” Communiting / Fritz Mill

Salient Features:-

1) GMP point of view machine is provided with S.S cledding on base, S.S.belt guards, S.S. cover on motor. No exposed painted surface on top of the machine. Motor rails, screw and guide rods are chrome plated.

2) Beaters assembly bearings are in a separate pillow blocks for ease in maintenance.

3) Very less down time as only beaters assembly will have to be reversed (and not the complete chamber) for making it knife to impact forward or vice- versa which can be done by single operator.

4) Fixed beaters assembly is provided as a standard supply which increase the output by 10 to 30 % & reduce noise level and also easy to clean as there are no cavities. ( if product demands, swing beaters assembly ban be provided.

5) Beaters and shafts are of stainless steel 410 quality and beaters are further hardened and chrome plated.Beaters are fitted on a splined shaft.

6) Transmission of heat to the chamber form the bearing is minimum as they are away in separate pillow blocks. This facilities to some extend in processing of heat sensitive products.

7) Beaters assembly is dynamically balanced which reduce vibration and notice level and increase bearing life.

8) Castors provided for mobility and breakes can be applied for fixing machine at one place.

9) Machine is available in Plain & Water Jacketed model. Flame proof electricals can be provided on demand at extra cost. 

General Specifications Of “The Bombay Engineering Works” Double Cone Blender

Operation:

The Double Cone Blender is an efficient and versatile machine for mixing dry powder and granules homogeneously. All the contact parts made out of stainless steel of required grade by customer. Two third of the volume of the Cone Blender is filled to ensure proper mixing. It can be used for Pharmaceutical, Food, Chemical and Cosmetic products etc.

 

Silent Features :

• The conical shape at both ends enables uniform mixing and easy discharge.
  All contact parts are made out of stainless 304 or 316 quality material, as required by customer.
• Maximum care has been taken to ensure safe operation of the unit.
• Manual rotating facility with hand wheel for inching. The same will be provided with ss cover & limit switch. ( In 200 Kgs. & above model )
• Two nos. of safety road will be provided at back side. ( One LH side & one RH side )
• Suitable size of butter fly valve at one end of the cone provided for material discharge & hole with openable cover provided at other end of the cone for material charging & cleaning.
• One shaft with 04 nos. of fixed buffels with mirror polished provided inside the cone.
• Cone will be mirror polished from the inside & outside & structure will be matt polished.
• All moving parts covered with SS304 covers.
• Safety guards made from SS304 pipes provided in front of the m/c with limit switch.
• Panel fabricated from SS304 material with facility of three phase indication, D.O.L. tarter, digital timer & Amp. Meter.
• As per customer requirement machine will be provided with left side drive or with right side drive.
• The conical shape at both ends enables uniform mixing and easy discharge.
• All contact parts are made out of SS304/316(as per customer requirement) quality material.
• Maximum care has been taken to ensure safe operation of the unit.
• Worm reduction gear use for speed reduction.
• Food grade rubber gasket will be used on both end of cone as well as in butterfly valve.
• Inside & outside of the cone will be polished to the mirror finished.
• General structure made out of SS304 and Polished to the matt / mirror finish
  (as required by you) in GMP Model.
• All safety guards & covers made out of SS304 in GMP Model.
• Hand wheel will be provided for manual tilting of cone.
• Safety guards provided with limit switch to not start the machine when safety guards are not in proper position.

The “The Bombay Engineering Works” Fluid Bed Dryer has adopted new concept of GMP Regulation with improved performance (drying time is much less than the conventional model) minimum involvement of manual labour simplified maintainance and utilise modular construction techniques to provide flexible installation options.

The process unit is two piece made of SS-304/316 stainless steel. Through mixing of Dry powders, Agglomeration and Drying are carried out in one unit of “The Bombay Engineering Works” Fluid Bed Dryer.

General Specifications Of “The Bombay Engineering Works” Packing Conveyor Belt

Available as per your require speed, length, height & width.
> Structure is made of S.S. 304 / M.S. 32mm square pipe with matt finish / painted.
> Table top is made of S.S.304, 16 gauge sheet with matt finish.
> Conveyor Belt is supplied with 3 speed pully.
> Special Self-aligning bearing ensure smooth and trouble free rotation of the Roller.
> Conveyor belt is used as a PVC coated canvas belt / endless rubberised belt.
> The Reduction Gear Box provides jerkless & noiseless performance for long time.

Optional Device

> Extra table at the end of machine.
> Speed variable AC frequency inverter drive.

Specification Load

> Electrical Load - Depends upon the length of conveyor belt.
> Height - 815 mm with 75 mm Adjustable Height.
> Width - Table Top of 12" Working Space on both side of the conveyor Belt.

General specifications of “the bombay engineering works” turbo sifter.

Turbo Sifter is used to sieve dry raw material in powder form before it is fed to Rapid mixer & wet granulator or High shear mixer.

The Turbo Sifter is suitable for separation of foreign objects from dry powder before mixing, One can use mesh size from 4 to 25. this machine is used for mainly screening the formulations (in form of dry powder) before feeding it in to the high shear mixer or Fluid bed granulator.

Turbo Sifter can also be mounted on castor wheel for mobility. Entire assembly and sieves can be removed for cleaning very easily.

Capacity : 400 kg/hour depending upon the physical properties of the product.

General Specifications Of “The Bombay Engineering Works” Vibrosifter / Mechnical Sifter

Vibro separators are circular unitary gyratory screens used to separate mass composition of solids from solids, liquid from solid and for gradation of materials as per particle size, having a very wide range applications.
This is accomplished by vibrating the screens in three different planes along the vertical axis by means of a specially designed vibratory motor having off centered weights at the top and bottom end of the motor shaft.

The top weight causes vibration in the horizontal plane which causes the material to move across the screen towards the periphery. The lower weight acts to tilt the machine which causes vibration in the vertical tangential axis.
The angle of lead of the lower weight with relation to the upper weight provides variable control of the screening pattern. Thus the material moves across the screens and also in the vertical and tangential planes enabling maximum screening. “THE BOMBAY ENGINEERING WORKS” Vibrosifter are available with a wide range of possible screen sizes (mesh) Option for multiple deck separation is also possible.
The unit consist of Specially designed vibratory motor to run on 400/440V, suitable HP, 3 phase, 50 cycles electric supply ,with adjustable eccentric weights at the top and bottom of the motor shafts mounted vertically at the center of the base plate of screening unit. Screening unit consists of SS 304 screen sandwiched between SS 304 hopper and bowl with the help of special clamp with gasket. This in turn is clamped to the base plate. Rugged Springs placed over the circular motor base amplify the vibration and at the same time restrict the vibration from being transferred to the floor.

Salient Features:

1) Noiseless, Maintenance free & high speeds.
2) Available in various models providing screening diameter of 12”, 20”, 30” , 36”, 48”, 72” etc
3) Portable and compact.
4) Electric power requirement less than other machine of the kind in the industries & lower energy 5)consumption compared to reciprocating vibratory system.
6) Standard machine are with TEFC motor explosion proof / flame proof motor material.
7) All contact parts and screen of SS 304 AISI stainless steel material.
8) SS 316 quality contact parts optional.
9) Special requirement like brushing arrangements, SS lid with charging port and spring loaded outlets.
10) Easy dismantling and cleaning facility for contact parts.
11) Wide range of screen sizes 4-300 Mesh.
12) Double & Triple deck screens with outlet and hopper for bottom deck available on request.