Control System Products
- Under Cabinet Add On
- Universal Isolation Amplifier
- USB Modem
- Extensive Marking Systems
- Worldwide Remote Access Systems
- Pressure Gauge
- Electronic Pressure Measuring Instrument
- Relay Modules
- PCB Mounting Profile
- Flexible Conduit System
- Wiring Duct
- Temperature Switches
- Solderless Terminal
- External Lightning Protection Devices
- Din Rails And Accessories
- Cable Gland
- Electronic Contactor
- Power Supply
- View All ▼
Control Systems Communication Devices
- View All ▼
We are engaged in offering IP 66/67 Electronic Enclosures that are provided as per the specific requirements of our clients. The state-of-the-art facilities and experienced professionals enable us to offer these Electrical & Electronic Enclosures for applications in varied offices, organizations, and industries.
Backed by a extensive industry experience in the domain, we are able to manufacture and supply quality range of Cable Lugs & Ferrules. These are designed and manufactured to meet the exact demands of various application areas. Owing to their compliance with the industry accepted standards, these are widely demanded among our clients.
Signal Transmission Equipment
We are engaged in designing, fabricating and offering a technologically advanced range of Signal Transmission Equipment. These are meant for converting signals capable of transmission on one type of cable to signals capable of transmission on another type of cable. The latest technology and components used in the equipment assure effective transmission of signals without any hassles.
Power PCB Connector
I/O Volumes Control System
You would like to collect I/O volumes at little expense and make them available to a control system? Our new Inline Block IO analog modules will convince you. These I/O Volumes Control System are used particularly for limited I/O volumes – distributed and directly on site at the application, in small terminal boxes or control cabinets.
Cable Gland is a device designed to permit the entry of a cable, flexible cable or insulated conductor into a casting, and which provides sealing and retention. Main usage of cable glands are machine building, plant construction, conveyor technique, apparatus engineering, fittings, power engineering, vehicle construction, railed vehicles, shipbuilding, aero planes, military engineering, electric motors, generators, frequency converters, drive technology, gear units, pumps, ventilators, electric and electronic components, products and devices, junction boxes, industrial enclosures, electric installations and controls, building automation, industrial automation, automation technology, lamps, luminaries, lighting technology
Flexible Control Cable
We are one of the leading suppliers for Flexible Control Cable for machine and plant building, automotive industriy, measurement and control technology, electrical and installatino engineering, IT and many other industries. To offer you optimum quality, our products are constantly tested at our own centers.
Our product range, for Example:
- Connections and cnotrol cables
- Highly flexibles cables for power chains
- Cables for servo motors
- Temperature resistance cables
- DAta, LAN and BUS Cables
- Optical fibre cables
- Industrial Ethernet components
- Cable Glands
- Protective cable conduit systems
- Power chains
- Cable marking system.
Screw Terminal Block
Complete range in the clipline complete system (terminal blocks)
Phoenix controls offers the most exhaustive range of electrical equipment like modular terminal blocks for your switch cabinets as connection elements. Popularity of our rail mounted terminal blocks emanates from the following features:
- Reliable contact
- Ease of use wide variety
- Universal application
- Efficient space utilization
The product range and variety in this category includes :
Different connection principles i. E screw termination, spring termination, wire wrap, solder, tab & termi point terminal connectors. The wide range of conductor size that can be terminated is from 0. 2 mm2 cross-section for low current and up to 240 mm2 for power applications. Wide range of accessories provide the flexibility of designing the panel layout, space utilization, clear marking and convenience in use.
The various application specific terminal blocks include:
- Sensor & actuator terminal connectors
- Disconnect type
- Fuse type
- Component terminal blocks
- Pluggable type
- Ground connection type
- Explosion proof terminal blocks and
- Terminal blocks for intrinsically safe applications
How do Surge Protection devices work, Surge Protection Devices (SPD) can be thought of as safety pressure valves that prevent the build up of excessively dangerous voltage in power system. SPDs are installed across the power supply / signaling / data / communication lines before the equipment to be protected and are normally in a high impedance state having no effect on the circuit operation. A Surge Current Pulse (waveform) is defined by the time taken by the surge to reach its maximum value & then the time taken by the surge to reach its half of the maximum value.
For example this waveform addresses true lightning and time/ duration of stroke by producing 50,000 amps in 10 ìs. After 350 ìs, the waveform is still at 25,000 amps. In this example the waveform of the surge is designated as 10/350 ìs with the amplitude of 50 kAmp. Similarly the switching surges are addressed by a waveform of 8/20 microseconds, for example a surge current of 20,000 amps in 8 ìs, coming down to 10,000 amps at 20 ìs can be termed as the surge of 8/20 ìs, with 20 kAmp amplitude.
The arrester Class B type (as per VDE classification) - lightening current arresters are based on the spark gap technology that operates by arc chopping principle with a rating for arresting lightening currents of up to 100 kA for lightening current pulses of 10/350 ìs and is installed at the main distribution area of the power supply.
It is the medium level protection. The arrester class C type (as per VDE classification) are single, high capacity varistor based surge voltage arresters that are available with at least one time surge arresting capacity of 40 kA, 8/20 ìs pulse and a repeated capacity for 20 kA, 8/20 ìs pulses. The technology used is that of MOV with an indication to check its proper functioning and are installed at sub distribution level.
Ether Net Switch
Port Standard Function Switch sf 8 tx from phoenix contact allows the network to be expanded easily and cost-effectively. With just 30 mm constructional width and simple configuration-free mounting makes the switch the ideal ethernet connection for your control cabinet or flat terminal boxes. The switch provides connectivity to eight twisted pair ports. 10 mbit/s or 100 mbit/s: the switch supports both transmission rates even in hybrid mode. This makes it possible to couple network segments or other devices with either the same or different transmission rates. Data collisions are thereby avoided. In addition, each port has an autocrossing function, due to which , it is no longer necessary to differentiate between 1:1 or crossover ethernet lines.
Surge Protection Plugs
Solid State Contactors
4 in 1 Solid State Contactors
The three phase “4 in 1 reversing contractor unifies four functions in one device for motor powers up to 4kv. Right contactor, left contactor, Motor protection relay and emergency.
Three phase solid state reversing contactors. The three phase solid state reversing contactors are suitable for the fully electronics wear free switching of motors with powers up to 18.5 kW. They also have a reversing function to change the direction of rotation.
Industrial Ethernet High-Speed Connectors
Manual And Measuring Tools
Phoenix Contact provides Manual and Measuring Tools for processing and connecting cables and conductors.
The professional tool for cutting, stripping, crimping, screwing and testing is impressive due to the good handling and excellent quality.
Thereby, the crimping pliers offer optimized power transfer with 25% power saving - for fatigue-free work
To,Phoenix Controls ( CBE )