PIX Transmission Limited

● made up of r-134a compatible synthetic rubber
● consists of high tensile steel wire which is capable to withstand
  pressure, vacuum and flexibility
● cover is made up of weather, ozone and heat resistant synthetic rubber
● used both for discharge and suction applications

the high tensile polyester cord enables the maximum power transmission
● possesses moulded cogs for extra flexibility
● they are oil and heat resistant
● these belts are capable of working on high speed engines
● these belts are good abrasion resistant
● these belts have low stretch and offer high power transmission even on small pulley 
  diameters

● high stability eliminating the possibility of belts turning over in pulleys
● greater power transmission in less space
● high efficiency due to reduced slippage
● ideal for pulsating loads
● low vibration for smooth running on even the toughest drives
● stringent length tolerance
● available in wrapped or moulded raw edge cogged construction
● optional kevlar cord belts available

description : suitable for highly specialised applications under stringent operations, such as drives where take-up allowance is not provided, continuous duty drives where re-tensioning is not possible, overloaded drives having space limitations.

They can be produced with the following dimensions on request.
length Li / equivalent Lp /La : 24-200 inches
Top Width : 5-82 mm,
Thickness : 5-25 mm,
Angle : 22⁰ to 42⁰

this special construction allows the use of belt on small pulley diameters to increase flexibility

these belts are recommended to be used on applications demanding clockwise and anti-clockwise rotations. Belts can be used from both sides.

suitable for very small pulley diameters.

they are suitable for drives having clutch applications. Lawn movers, chemical industries where contamination is not acceptable. basically manufactured in blue cover.

can also be supplied in green, brown, red, black and white colours. available in polyester and aramid or kevlar cord constructions.

specially designed poly belts for pj and ph sections for washing machines. They are with elastic properties which is useful in many applications.

higher heat resistance, up to 150⁰c.
excellent ozone resistance.
rib crack  resistance
wear and  tear resistance
low noise
longer life
free of halogen

fire resistant & anti-static
it is suitable in certain working environments such as coal mines & sensitive petrochemical installations require v-belts having fire resistant properties in addition to normal anti-static properties.
 

description : suitable for drives working in inflammable atmospheres & at elevated temperatures.

description : suitable for applications where because of humidity electrostatic generation is high and also suitable for applications under temperatures (60⁰c - 100⁰c) and drives where dripping of oil cannot be prevented.

specially designed to withstand high ambient temperature and oily conditions generally encountered in adjustable speed applications.

hexagonal belt or double v-belt is  a special construction belt which can give wedging action from both the sides of the belt. The shape of hexagonal belt is like two v-belts bonded back to back, which enable it to give the wedging action from both the sides of the belt. The tensile member lies exactly at the center of the belt height. The family includes sections as aa, bb, cc and 25 confirming to the standards is 11038, iso 5289, rma ip 21. The belt is wrapped with strong wear resistant bias cut neoprene rubberized fabric.

● extremely small pulley diameters
● high belt speed
● extraordinary power transmissions are required
● high ambient temperatures render the use of wrapped v-belts uneconomical and impractical

pix make cut edge belts offers the best technical and economic solution for above mentioned conditions through their use of high grade components coupled to the most advanced production machinery.

uniform load distribution all over the cross section
only one belt required. No matching. Uniform tension
constant speed ratio, the ribs never sink inside the pulley
suitable for drives with inside and outside idlers
extremely flexible with reduced thickness
can be used on drives from reverse side and in compact layout
high surface speed combined with high speed ratios
smaller pulley diameters

standards :
pix automotive belts confirms to the following standards:
● din 7753, bs au 150b, iso 2790, is 5635, sae 636, rma ip-26, iso 9981
● pix power performance automotive belts are available in wrapped, cut edge and ribbed
  constructions.

sections :
3pk, 4pk, 5pk, 6pk, 7pk, 8pk, avx10, avx13, avx17

specially designed curvilinear tooth profile
● reduced tooth jump due to higher teeth shear resistance
● high power rating compared to pix - x'act htd belts
● less backlash, long life, excellent abrasion resistance
● less noise, no maintenance or equipment downtime.

example 270 xl 025
where 270 : pitch length 27. 0"
xl : section (tooth pitch 5. 080 mm)
025 : belt width : 0. 25" (w)

pix power wrap belts are the first of the v-belts to enter the power transmission scenario. The continued effort of the r&d of pix has enabled to achieve the power ratings considerably higher than most of the available brands in the market. the compound used to build up these belts are well chosen to match the stipulated power ratings, thus offering distinct advantages regarding the increased factor of safety on critical drives.

pix variable speed belts are designed for efficient power transmission with minimised wasteful heat generation. A special rubber compound with textile fibres oriented across the length of the belt provides high stability  & minimizes deflection in the cross section. The belts are temperature and oil resistant as well as antistatic. The minimum stretch stiff polyester cords have been   designed for heavy power   transmission while at the same time ensuring a very high degree of length stability. The sides of the belts have excellent abrasion resistant properties contributing significantly to long  & useful belt life. A moulded cog reduces bending stresses  & improves heat dissipation in cut edge cogged construction.

high load carrying capacity
● high resistance to oil, heat, dust and cracking
● specification as per rma ip-25, iso-3410, bs-3733 standards
● extensive product range
● stringent length tolerance
● manufactured to iso-9001:2000 and iso/ts 16949:2002 standard