Plating Products Trading Co.


Home » Our Products » Electroplating Metal


Electroplating Metal

Microporous Plating Nickel


Microporous Plating Nickel

Item Code: E-Brite-704-MP

We are offering our clients the finest Microporous Plating Nickel, manufacture by EPI (USA). Procured from the accredited vendors of the industry, this plating increases the corrosion resistance of the nickel-chrome plate by depositing a thin nickel deposit. It has a specific amount of non conductive particles, resulting in a microporous chrome plate. To cater to the diversified demands of the clients, we offer this chemical in different quantity.

 

Features:

 

  • Effectiveness
  • Accurate formulation
  • Reliability
  • Longer shelf life





Bright Nickel Plating


Bright Nickel Plating

Item Code: E-Brite-757

We are offering our clients the finest Bright Nickel Plating, which is manufacture by EPI (USA). Formulated by making use of supreme quality required basic compounds, these offered products conform to the defined parameters of the industry.

 

Other information:

 

  • It produces highly ductile deposits which are free from laminations
  • It offers brilliant, white deposits of high clarity, reflectivity and depth
  • The deposit is active and can be chromium plated
  • This nickel plating process can be used in barrel applications as well as cathode rod and air agitated rack installations
  • It is a process that plates faster with more coverage in the low current density area
  • It produces 20 to 30% more nickel thickness in the lower current density area than any other nickel system.
  • It eliminates plating variations common with multi-additive bright nickel processes 





Copper Plating On Magnesium


Copper Plating On Magnesium

Item Code: E-Brite-Ultra-Cu-Mg

We are widely acknowledged for offering Copper Plating Chemical on Magnesium to our clients, which is manufacture by EPI (USA). Conforming to the defined parameters of the industry, this chemical offers excellent adhesion and corrosion protection on AZ91 magnesium castings.

 

Further information:

 

  • It produces adhesion with average salt spray results 24 hours ASTM B-117 and parts can not be baked without blistering
  • It produces 96 hours on copper nickel chrome parts and as a base plate underneath electroless nickel achieved 400 hours salt spray





Electroplating Zinc


Electroplating Zinc

We bring forth the best Electroplating Zinc for our valued clients, which is manufacture by EPI (USA). Procured from the established vendors of the industry, this range conforms to the defined parameters of the industry. Furthermore, to cater to the diversified demands of the clients, we offer this in different quantity.

 

Benefits of zinc plating:

 

  • Ultra bright zinc deposit
  • Approaching that of chloride zinc
  • Excellent ductility & adhesion
  • Maintains ductility even with thicknesses in excess of one mil
  • A low stress deposit
  • Superior zinc deposit plate distribution
  • Consistent distribution
  • Excellent chromate conversion coating receptivity
  • Zinc deposit appearance is comparable to cyanide or chloride zinc
  • Operates within wide range of bath chemistry
  • Temperature tolerance up to 120 F, which reduces cooling costs
  • Excellent brightener stability and brightener life of 30,000 amp hours
  • Suitable for either rack or barrel plating
  • Simple waste treatment procedure
  • A reliable, easy to maintain process
  • It contains no complexers or chelating agents
  • It accepts all hexavalent and trivalent chromates





Electroplating Cadmium


Electroplating Cadmium

Item Code: E-Brite-C-135

We offer a wide variety of Electroplating Cadmium (E-Brite-C-135), which is manufacture by EPI (USA).. This product is a single additive cyanide cadmium brightener with tremendous throwing power .It has an exceptional white brilliance that approaches silver plating in appearance. The deposit of this product remains bright in low current density areas so excessive bright dipping is not required as is the case with other processes. The concentration of this product can vary from 1/2 ounce to 3 ounces per gallon with 2 1/2 ounces preferred. Its lower concentration reduces drag out of cadmium metal.

 

The varied feature of this product are listed below :

 

  • For excellent corrosion resistance even at relatively low thicknesses
  • For freedom from sticky or bulky corrosion products.
  • To produce a smooth ductile deposit
  • Outstanding performing product





Mild Phosphorus Electroless Nickel


Mild Phosphorus Electroless Nickel

Item Code: E-EN-602

With the support of our vendors, we have been able to provide our clients outstanding Mid Phos EN Chemical, manufacture by EPI (USA). This plating produces bright mid phosphorus deposits which meets or exceeds the standard lead/cadmium medium phosphorus EN baths. Our valued clients can avail this chemical in different quantity as per their requirements.

 

Other information:

 

  • Exceptional brightness during the entire bath life and MTO on aluminum
  • It meets MIL 26074B, AMS-2404B, and AMS 2405 specifications and is in compliance with End of Life of Vehicle (ELV), RoHS (electronics), and WEEE (electronics) initiatives
  • It produces consistent pit-free smooth deposits without lead and cadmium
  • Exceptional stability
  • Consistent plating rates
  • High tolerance to impurities
  • 1:1 replenishment addition
  • Long lasting

Deposit properties:

 

  • Nickel content 92.0-95.0% by weight
  • Melting point 880-1100º C
  • Density 7.9-8.3g/cc
  • Neutral salt spray (ASTM B-117) 100 hrd @ one mil thickness
  • Magnetic property: Slightly magnetic
  • Hydrochloric acid test (50% by volume, 3 minutes, 70ºF) PASS
  • Electrical resistivity 50-100 micro-ohm/cm
  • Phosphorus content 5.0-8.0% by weight
  • Hardness 52-56R as plated, 66-68R (400ºC)
  • RCA nitric acid fail

 

Bath performance:

 

  • Steel: 8-10 MTO
  • Aluminum with ammonium hydroxide 4-6 MTO
  • Potassium carbonate: 6-9 MTO
  • Nickel strike: 7-10 MTO





Semi-Bright Sulfur-Free Plate Electroplating


Semi-Bright Sulfur-Free Plate Electroplating

Item Code: E-Brite-700-SB

Our valued clients can avail from us Semi-Bright Sulfur-Free Plate Electroplating, which is manufacture by EPI (USA). This is a semi-bright sulfur-free plate for duplex nickel plating. It produces a deposit with a high degree of leveling and ductility plus a low electro-negative potential: 120-180mVolt (step value). Furthermore, it has passed Chrysler ductility test and ASTM B-490-92 bend & ductility test. It produces less breakdown product which means less frequent carbon treatment.

 

Features:

 

  • Effectiveness
  • Reliability
  • Longer shelf life
  • Accurate formulation





Electroplating Tin


Electroplating Tin

We are offering our clients with Electroplating Tin, manufacture by EPI (USA). Products that we offer effectively protect metal products from corrosion and abrasion.

 

Complying with the defined parameters of the industry, these coatings hold several below cited attributes:

 

  • Longer shelf life
  • Effectiveness
  • Non-allergic
  • Non-toxic
  • Skin friendliness

 

Other information:

 

  • The bright tin provides a high degree of luster and is generally used for applications on bus bars, terminals and switching components
  • Both processes are electrolytically applied





Electroplating Bronze


Electroplating Bronze

Item Code: E-Brite-Bronze-NCN

We offer our customers a varied variety of Electroplating Bronze (E-Brite-Bronze-NCN), which is manufacture by EPI (USA). It is a Alkaline Non-Cyanide Bronze Plating product which plates directly on copper and brass surfaces without a cyanide copper strike. This product is used mainly for heavy bronze plating which will be antiqued (oxidized and relieved). It is used for plating an alloy of copper (85 to 95%) and tin (5 to 15%).

 

It is available in the following forms :

 

  • E-Brite Bronze NCN-Cu - liquid concentrate
  • E-Brite Bronze NCN-Sn - powder

 

It can be used for the following purposes:

 

  • For barrel plating
  • For rack plating
  • To maintain the tin concentration in the solution
  • To maintain the copper concentration in the solution
  • To obtain the best adhesion on steel





Electroplating Chrome


Electroplating Chrome

Item Code: E-Brite-CR

Our valued client can avail from us Electroplating Chrome for plating many metals, which is manufacture by EPI (USA). Procured from the accredited vendors of the industry, this chemical increases the corrosion resistance of chromium deposits. Metals coated with this chemical has less friction and resistant against wear. To cater to the diversified demands of the clients, we offer these chemicals in different quantity.

 

Salient features:

 

  • Bright decorative finish
  • Trouble-free
  • Easy-to-use
  • Highly activating
  • Stain-free
  • Exceptional covering power

 

Chromium plating can be done on a variety of metals parts such as:

 

  • Automotive parts
  • Aluminum wheels
  • Motorcycle parts
  • Boat parts
  • Antiques
  • Plumbing equipment
  • Electronics
  • Door hardware and locks
  • Light fixtures





High Phosphorous Electroless Nickel


High Phosphorous Electroless Nickel

Item Code: E-EN-600

Our valued clients can avail from us High Phosphorous Electroless Nickel, manufacture by EPI (USA). This offered chemical effectively provides finish which resists tarnishing and enhances appearance of the object. It also provides corrosion resistance, plate rate consistency, smoothness and stability. This conforms with the MIL 26074-B, AMS-2404B, and AMS 2405 specifications. It is compliant with the End of Life of Vehicle (ELV), RoHS (electronics), and WEEE (electronics) initiatives. It produces consistent pit-free smooth and stain resistant deposits.

 

Deposit properties:

 

  • Nickel content 88-90% by weight
  • Melting point 880-960º C
  • Density 7.9g/cc
  • Magnetic properties non-magnetic
  • Hydrochloric acid test (50% by volume, 3 minutes, 70ºF) PASS
  • Electrical resistivity 50-100 micro-ohm/cm
  • Phosphorus content 10.6-12% by weight
  • Hardness 46-48R as plated, 68R
  • RCA nitric acid test PASS
  • Neutral salt spray (ASTM B-117) 1000 hours

 

Bath performance:

 

  • Solution life: 8-10 MTO (steel), 5-7 MTO (aluminum)
  • Plating rate: 0.4-0.6 mils/hr (190ºF, ph 4.9) 









Contact Us
Plating Products Trading Co.
Mr. Hardik Bhatt (Proprietor)
Shop No. 16, Neelkamal Housing Society, Chincholi Phatak, Malad - West
Mumbai - 400064, Maharashtra, India

Contact via E-mail



Home  |  Profile  |  Our Products  |   Trade Offers (4)  |  Site Navigation  |  Contact Us

Member IndiaMART.com © Plating Products Trading Co.. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited