PMI Conical Blenders is particularly suitable for handling large powder volumes with moderate to small but difficult to blending dry and moist powders, wet cakes and slurries.
Features:-

• Ribbon agitator for centre discharge.
• Designed for atmospheric operation.
• Variable/single speed drive.
• Easy to clean.

Capacity Ranges:- From 50 Litres to 15000 Litres.
Application:-

• Food
• Pharmaceuticals
• Dyes
• Chemicals
• Adhesives
• All any types of Powder blending

Design Options:-

• Wetted parts of Carbon Steel, Stainless steel and special alloys.
• Continuous ribbon agitator for end discharge, interrupted ribbon for higher density materials.
• Horse power to suit higher density materials.
• Spray nozzles for liquid introduction.
• Dimpled, limplet or baffled jackets for heating or cooling.

Material of Construction:- Can be manufactured in all weldable materials, carbon steel, stainless steel and special steels.

PMI Ribbon blender is suitable for handling large dry and wet powder volume. It consists of a horizontal 'U' tough with horizontally installed mixing shaft.
Features:-

• Designed for atmospheric operations.
• If dictated by process conditions, highly polished internal surfaces can be provided.
• Provision for measuring of product temperature can be provided, if required.
• Beacing mounting on-outside of mixing container to avoid contamination.
• Dust-proof model.
• Teflon braided packing.
• Single speed drive.

Capacity Ranges:- From 50 Litres to 15000 Litres.
Applications:-

• Food
• Pharmaceuticals
• Chemicals
• Dyes

Design Options:-

• Wetted parts of carbon steel, stainless steel and special alloys.
• Continuous ribbon agitator for end discharge, interrupted ribbon for higher density materials, paddles for full or partial loads.
• Vacuum or pressure construction.
• Sanitary type construction
• Cover openings as required.
• Spherical, flush type ball discharge valve.
• Horse power to suit higher density materials.
• Spray nozzles for liquid introduction.
• Lump breakers for solider or agglomerates size reduction.
• Dimpled or baffled jackets for heating or cooling.

Material of Construction:- Can be manufactured in all weldable materials, carbon steel, stainless steel and special steel.

These mixers are highly efficient for super fast mixing of powders, granules with or without addition of liquids and pastes of low viscosities.
Applications:-

• Chemical Industry
• Pharmaceutical
• Food and Coating Industries.

These consists of a cylindrical shell fitted with ploughs. These create a hurling and whirling three dimensional effect that helps in efficient mixing. Lump breakers are installed at the bottom of the cylinder for breaking of lumps and agglomerates.

A few of the most successful applications of Nauta Mixer (Cone Screw) are Mixing of powders as well as pastes & sluccies, Addition of liquids, Granulation, Cooling and heating.
Features:-

• Important feature is the possibility to combine several processes in the one machine offering huge savings in investment labour costs & space.
• Materials are mixed successfully to an accuracy of 0.001% or better.
• It achieves a throughly homogeneous of one third to one half the time of most conventional mixers in the same category, even depends on mixing elements speeds.
• Power requirements are much less than with other types & mixers.
• Liquids are injected & atomized into the top of the mixer through the hollow of the drive system.
• Partial or full load batches are mixing equally well with no reduction in mixing efficiency.
• Its unique cone design provides gravity unloading gives cleaner & faster batch discharge.
• The top entering drive system provides full product protection with no bearings nor seals in direct contact with the product.
• Its unique obstruction-free cone shaped design allows for fast & easy cleaning.
• No degradation or segregation, generation of heat.

Capacity Ranges:- Gross Capacity iV 50 Litres to 15000 Litres.
Applications:-

• Food
• Pharmaceuticals
• Dyes
• Chemicals
• Adhesives
• Granulation
• Soap Powers
• Food Premixes
• Agricultural Chemicals
• Coating

Design Options:- Due to the diversity in industrial requirements, various modules have been developed.

• Mixers with cantilevered mixing screw.
• Radial bottom loader for the mixing screw.
• Tapered mixing screw.
• Twin screw.
• Double cone.
• Mixes in pharma design.

Material of Construction:- Can be manufactured in all weldable materials-carbon steel, stainless steel & special steels.

PMI Drying System helps in energy savings, low labour deployment, uniform quality products, low space requirement and minimal dusting due to negative pressures in the system during drying. We are manufacturing various types of dryers:
Spray Dryers:- PMI spray dryer in standardized and special designed in drying as per customers requirement (specifications). It is basically designed for evaporate liquid contents from product by using hot air.
Features:-

• Totally automatic CIP system.
• Any size as per customer requirement.
• Quality and quantity as per four requirement.

Application:

• Food
• Pharmaceuticals
• Chemical
• Ceramics
• Detergents

Spin Flash Dryer:- PMI Spin Flash Dryer is a continuous bulk drying system which helps in uniform quality products, energy savings, low labour deployment, low space requirement and minimal dusting due to negative pressures in the system during drying. The design of the spin flash drying system depends, inter dia, upon product characteristics, capacity & other specific application requirement. Consequently every system is custom designed.
Features:-

• Dust free operation, because it operates under negative pressure.
• Dries wet cake
• An extremely energy efficient continuous drying system, the efficiency being in the region of 60-80 percent.
• Occupies lesses space compared to spray dryer or pneumatic flash dryer
• Very wide range of application as compare to other types of direct contact dryers.

We offer a complete range of air recievers:-

• Painted or galvanised air receivers.
• Horizontal or vertical air receivers.
• From 90 to 5000 litres.

PMI Agitated vessels is engineered and custom built with best-quality. It consists of a cylindrical shell with welded distend end at top and bottom either a flanged and bolted distend end depending on process/customers requirements. An agitator of unique design is provided inside the vessels as per process/application. The rpm varying from 05 rpm to 1440 rpm. The vessels with heating and cooling arrangement totally enclosed with suitable agitator provided which works at different temperators and pressures. These agitated vessels are also designed for holding air, gases, liquid under pressures in various capacities ranging from 10 Litres to 5000 Litres. These agitated vessel are manufactured to suit the products. Material of construction for agitated vessel are in carbon steel, stainless steel of rubber lined.

We provide to our clients heavy fabrication work which is customized as per the clients needs. We have undertaken the turnkey projects in this field and helped our clients in making teir work efficient and effective.