Polygon Chemicals Private Limited

Our wide assortment of concrete
admixture is prepared using qualitative chemicals as raw material.
Our concrete admixtures are effective as concrete super plasticizers
and provide better slump retention and are compatible with different
grades of cement. Our wide array of concrete admixture includes the
following:
 
VITCON 9001 [High Range Concrete
Superplasticiser]

VITCON 9001 is a brown ready to use
concrete superplasticiser which confirms to the specifications of
ASTM C 494 type G and IS 9103-2003. This is based on Sulphonated
Naphthalene Formaldehyde and selective polymers to achieve a pumpable
concrete at tropical atmosphere.

Advantages:

• Better slump retention property
  


• Compatible with different grades
  of cement
  


• Helps achieving pumping concrete
  


• Enhances ultimate strength with
  maximum water reduction
  


• Controls set retardation with
  optimum dosage
  


• Economizes the mix reducing cement
  content
  

Specifications:

• Appearance: Dark brown liquid
  


• Sp. Gravity: 1.20 ± 0.02
  


• pH Value : 7 ± 1
  


• Chloride content: Nil
  


• Air content: < 1%
  


• Shelf life: 12 months
  


• Storage: Under shade
  

VITCON 9001 LG [Low Grade
Concrete Superplasticiser]

VITCON 9001 LG is a light brown ready
to use concrete superplasticiser which complies with the
specifications of ASTM C 494 type G and IS 9103-2003. This is
formulated using a combination of Sulphonated Naphthalene
Formaldehyde and co-polymers. It is widely used for lower grades of
concrete with pumpable consistency.

Advantages:

• Compatible with various grades of
  cement
  


• Enhances the strength of cement
  


• Improves retention in flow with
  time
  


• Enhances initial workability with
  lower cement content
  

VITCON 9001 HG [High Grade
Concrete Superplasticiser]

Our VITCON 9001 HG is a high-grade
brown colored concrete superplasticiser which confirms to
specifications of ASTM C 494 type G and IS 9103-2003. It is
formulated for high performance concrete at extreme climatic
conditions. This is based on Sulphonated Naphthalene Formaldehyde and
selective dispersant polymers.

Advantages:

• Enhances slump retention
  


• Compatible with all grades of
  cement
  


• Helps to achieve pumping concrete
  


• Enhances strength with maximum
  water retention
  

VITKOTE SP 7[Normal Concrete
Superplasticiser]

VITKOTE SP 7, a light brown ready to
use concrete superplasticizer, confirms to the specifications of ASTM
C 494 and IS 9103 – 2003. This is based on selective polymers with
high dispersion effect and specially formulated for producing pump
concrete at tropical atmosphere. It reduces bio mass growth in the
concrete.

Advantages:

• Improves slump retention
  


• Helps to achieve pumping concrete
  


• Compatible with all types of
  cement
  


• Controls set retardation with
  optimum dosage
  


• Increases ultimate strength with
  maximum water reduction
  


• Helps to reduce any bacterial or
  fungal growth in concrete
  

Our construction chemical division offers a total versatile solution to
the civil industry, both in infrastructure and domestic market segment.
The product range includes concrete superlasticizers, normal water
reducing admixtures, integral-waterproofing compounds, polymeric
waterproofing barrier coating, mould release agents, curing compounds,
air entraining agents, block additives, bonding agents, tile additives
and so on. In addition to the above mentioned product range, we also
offer a customized solution to the civil industry.

• Concrete Admixture


• Silica Fume


• Waterproofing Compound


• Mould Release Compound


• Tile Adhesives


• Shotcrete Accelerators


• Floor Hardner


• Segment Jointing Material


• Membranes


• Grouting & Grout Additive


• Rock Anchoring


• Plasticizers


• Water Repellent Coating


• Curing Compounds

Our floor hardeners are formulated
using qualitative chemicals as raw material. These chemicals increase
the abrasion resistance of concrete and enhance resistance against
mechanical wear. Some of our range is as follows:

VITCON 9045 HARD TOP FLOOR [Non
Metallic Floor Top Hardener]

This pre-packed readymade compound is
available with hard granules of predetermined sizes. It is formulated
to enhance the surface strength of concrete floors and also to impart
abrasion resistance against traffic movement.

Advantages:

• Increases abrasion resistance of
  concrete
  


• Increases coverage of the given
  mix quantity
  


• Enhances resistance against
  mechanical wear
  


• Easily applicable by spreading
  over the green concrete
  


• Being non-metallic the product
  ensures a corrosion resistant hard floor
  

Specifications:

• Appearance: Grayish powder.
  


• Hardness: 7 – 8 (as per Moh’s
  scale)
  


• Water Absorption: 6.0 – 6.5 %
  (as per IS 1237)
  


• Abrasion resistance: ± 1.5
  mm (as per IS 1237)
  


• Packing: 25/50 kg HDPE woven bags
  


• Storage: Away from moisture &
  heat
  

Our wide assortment of mould release
compounds are prepared keeping in mind the construction works. These
compounds are formulated for smooth release, easy applications and
zero contamination with concrete. Some of our range comprises of the
following:

VITCON 9032 RELOL [Formwork
Release Oil]

This is a light brown ready to use
formwork release agent which is based on synthetic oil modified with
selective additives. VITCON 9032 RELOL is specifically formulated for
smooth release of concrete from surface of formworks used in
construction industry.

Advantages:

• Smooth release
  


• Zero contamination with concrete
  


• Easy to apply on any surface
  


• Helps to achieve excellent surface
  finish in concrete
  

VITCON 9033 RELOL WEM [Formwork
Release Emulsion]

VITCON 9033 RELOL WEM is pale ambour
colored concentrated mould release emulsion ideal for formworks in
construction industry. It is based on refined specialty oils and
fatty acids blended with special additives. It is formulated for
wooden formworks where release of formworks is extended for extended
hours.

Advantages:

• Smooth release of formworks
  


• Economical - better surface
  coverage
  


• Non-staining which minimizes
  cleaning of oils
  


• Can be used for any formwork –
  best efficiency with wooden moulds
  

Our comprehensive range of oil field
chemicals are formulated using qualitative raw material. Backed by
our sophisticated production facility we are able to formulate
chemicals with accurate composition. Some of our oil field chemicals
comprises of the following:

VITCON 2004

VITCON 2004 is a mixture of surfactants
and emulsifying agents. It is widely used for cleaning activity on
rigs, barges, ships and platforms. It provides good foam when used
with sea water. It is highly effective in removing oil, grease and
stains without affecting the underlying concrete/metal substrate.

Specifications:

• Nature: Amber liquid
  


• Odor: Perfumed
  


• Specific Gravity: 1.0-1.1
  


• Viscosity: ~40-50 cps
  


• PH: ~7.0
  

VITCON 5000

VITCON – 5000 comprises of effective
filming corrosion inhibitor, oxygen scavenger and biocide. This
chemical acts as a multicomponent, multifunctional formation, which
prevents corrosion, microbiological growth in single product
treatment programme.

Physical Properties:

• Appearance: Yellowish
  


• Odor: Sharp
  


• Viscosity: 7 cps at 250⁰C
  

Advantages:

• It is designed to treat
  hydrostatic test fluid, saltwater packer fluid, saltwater drilling
  fluid, during hydrotesting and oil field water injection programme.
  


• Economical to use
  

VITCON 5006

VITCON 5006 is used to minimize the
problems associated with secondary recovery of oil in oil fields.
This is specially formulated to prevent corrosion in the pumping
machinery, well inlets and other components due to high salinity. It
also prevents microbial corrosion due the microbial life present in
the injection water. Further, this chemical helps in preventing scale
deposit at the base of the injection wells

VITCON 5008

VITCON 5008 is a mineral oil based
silicone free Defoamer. The chemical with active ingredient is ideal
for pain, ink, oil field and paper application. It is suitable for
perform at high ph and extremely low pH.

Specification:

Test	Specification
Appearance	Pale yellow opaque liquid
Viscosity(30oC)	1000cps max
Sp. Gravity (25oC)	0.8400 – 0.8700
Ph(1%aq)	6 – 8
Moisture (k/f)	1% max
Solubility	Dispersible in water

VITCON 6000

V-6000 scale inihibitor is formulated
using a blend of organic anti scaling agents. It prevents CaCo2 BaSo4
SrSo4 scales in oil and gas production equipment and in water
injection system. It has good hydrolytic stability up to 1500C. This
chemical is effective in preventing crystal formation of the
sulphates and thereby large-scale aggregation and clogging of the
injection well bottom.

We manufacture and provide
comprehensive range of plasticizers using optimum quality chemicals
as raw material. Our plasticizers are widely used for special
features such as strong dispersion property, reduction of segregation
and bleeding, and many more. Some of the salient features of our
plasticizers comprises of the following:

VITCON 9012 WR [Concrete
Plasticizer]

Our synthetic dark brown liquid
concrete plasticizer confirms to ASTM C 494 type A and IS 9103 - 1999
specification. It has strong dispersion property and the special
biocide formula also reduces any bio mass growth in the concrete.

Advantages:

• Reduces segregation and bleeding
  


• Enables to achieve a workable
  concrete at low W/C ratio
  


• Reduces total water demand in
  concrete resulting in higher strength
  


• Reduces permeability of the
  concrete appreciably
  


• Helps to achieve an economic
  cohesive mix at low cement content
  

Specifications:

• Appearance: Brown liquid
  


• Sp. Gravity: 1.18 ± 0.02
  


• pH Value: 7 ± 1
  


• Chloride content: Nil
  


• Air content: < 1%
  


• Shelf life: 12 months
  


• Storage: Under shade
  

VITCON 9012 RP [Retarding Concrete
Plasticizer]

VITCON 9012 RP is dark brown liquid
retarding concrete plasticizer which conforms to ASTM C 494 type B
and IS 9103 - 1999 specification. This is a perfect blend of
retarding polymers and flow inducers which shows moderate dispersion
property as soon as it is added into the concrete mix.

Advantages:

• Retards setting time of concrete
  


• Reduces segregation and bleeding
  


• Reduces permeability of the
  concrete
  


• Produces workable concrete at low
  W/C ratio
  


• Helps in placing concrete at
  extreme climatic situations
  


• Helps to achieve an economic
  cohesive mix at low cement content
  

Specifications:

• Appearance: Dark Brown liquid
  


• Sp. Gravity: 1.16 ± 0.02
  


• pH Value: 7 ± 1
  


• Chloride content: Nil
  


• Air content: < 1%
  


• Shelf life: 12 months
  


• Storage: Under shade
  

VITCON 9014 BLOKMIX [Block Additive]

This brown liquid concrete additive
confirms to ASTM C 494 type A and IS 9103 - 1999 specification. It
shows a strong dispersion property resulting to a highly workable
system at a lower W/C ratio when added to concrete block mix. Its
special biocide formula also reduces any bio mass growth in the
block.

Advantages:

• Reduces segregation and bleeding
  


• Reduces bio mass growth in wet
  condition
  


• Enables to achieve a workable
  concrete at low W/C ratio
  


• Reduces total water demand in
  concrete resulting in higher strength.
  


• Reduces permeability of the
  concrete appreciably
  


• Helps to achieve an economic
  cohesive mix at low cement content
  

Specifications:

• Appearance: Brown liquid
  


• Sp. Gravity: 1.15 ± 0.02
  


• pH Value: 7 ± 1
  


• Chloride content: Nil
  


• Air content: < 1%
  


• Shelf life: 12 months
  


• Storage: Under shade
  

VITCON 9015 RETARDSOL [Concrete
Surface Retarder]

This chemical is used for retardation
of surface concrete to achieve an exposed aggregate finish. This is
based on solvent free polyhydroxy compound blended with specialty
additives, which re

Rock anchoring chemicals are formulated
for stabilizing the grout system to achieve high early strength.
These are ideal for anchoring bolts into rock or concrete, used
during tunneling for rock stabilization. Some of our range comprises
of the following:

VITCON 7001 ANCHOR C [Non-Shrink
Cementitious Anchor Capsule]

This is a ready to use cementitious
powder base anchoring capsule with a perforated skin. It imparts
controlled expansion characteristics for stabilizing the grout system
to achieve high early strength. It is used for fixing of steel rock
bolts or wooden dowels to control rock strata during tunneling and
mining.

Advantages:

• Chloride free
  


• Ready-made dry capsule – easy to
  apply
  


• Non- shrink - reduces development
  of cracks and ensures effective contact
  


• Thixotropic property reduces loss
  of grout during overhead applications
  

VITCON 7002 ANCHOR R [Rock
Anchoring Resin Capsule]

This rock anchoring chemical is a ready
to use polyester resin based anchoring capsule with measured
proportion of catalyst and non-reactive filler. This offers a unique
method of anchoring bolts into rock or concrete, used during
tunneling for rock stabilization. Some of the salient features of our
chemical are as follows:

• Ready to use product
  


• Resists natural and atmospheric
  effects
  


• Fast development of strength
  


• Easy to apply with permanent
  anchorage
  

Our tile adhesives are formulated for
easy application and are effective in tile adhesions. Our wide
assortment of tile adhesives finds their applications across various
construction works. Our wide gamut of tile adhesives comprises of the
following:

VITCON 211 TILE FIX [Tile
Adhesive]

This is a cementitious base powder
which is formulated for adhesion of ceramic tiles and marble cladding
to building surfaces. It comprises of selected grades of Portland
cement admixed with synthetic polymeric additives to suit various
requirements of thick/thin bed performance.

Advantages:

• Easy application
  


• Low shrinkage helps better bonding
  with the surface
  


• Slow setting property helps the
  mason to adjust and align the tiles or cladding to achieve a perfect
  finish
  


• Makes the surface watertight
  beneath the tiles – best use for swimming pools, bathrooms,
  toilets and underground structures
  

Our water repellent coatings are
formulated using premium grade chemicals as raw material. This used
in construction works to offer resistant against high alkalinity and
other special features. Our range comprises of the following:
 
VITCON 2010 [Water Repellent
Coating]

Our water repellent coating VITCON 2010
is a colorless water repellent micro emulsion based on
silane-siloxane. Some of the salient features of this water repellent
coating include the following:

• Easily penetrates in to all
  masonry structures
  


• Resistant against high alkalinity
  


• Strong water repellent
  characteristics
  


• Dries in a normal atmospheric
  condition
  

Application:

• Any concrete substrate
  


• Mineral plasters
  


• Concrete Blocks
  


• Mineral based stone structures
  


• Mineral paints
  


• Ceramic and structural tiles
  


• Mangalore tiles & Corrugated
  AC sheets
  

We manufacture and supply wide
assortment of water treatment chemicals. Our wide range of water
treatment chemicals are formulated using qualitative raw material.
Our range comprises of VITCON 4001, VITCON 4003, VITCON 4005, VITCON
4007 and DESCALE 21. Some of the salient features of our water
treatment chemicals include:

• Pure
  


• Effective
  


• User friendly
  


• Accurate composition
  

Our comprehensive range of waterproofing compound are formulated using qualitative chemicals as raw material. Our water proofing compounds are used in construction works. Water proofing chemicals provide various advantages including reduction of permeability in concrete, prevention of seepage in concrete & many more. Our wide gamut of waterproofing compounds comprises of the following:
 
VITCON 9041 RAINKOTE MX B [Integral Waterproofing Compound]

This light pink colored liquid water proofing compound is added with concrete or mortar for ensuring better waterproofing. It has very good miscibility with cement matrix and prevents water seepage through structures when used with proper ratio of cement & sand.

Advantages:

• Reduces permeability in concrete
  


• Prevents seepage in concrete
  


• Compatible with all types of cement
  


• Best suitable for water retaining structures
  


• Economizes the mix with reduction in cement content
  

VITCON 2011 POLYKOTE [Multipurpose Polymer for Repair & Waterproofing]

This multipurpose polymer is ideal for various repair & waterproofing works. It comprises of acrylic copolymer & is generally blended with cement in different consistencies & the resultant polymer-cement mixture is used to provide the bonding as well as barrier coating of concrete structures. It also modifies the cement system to resist abrasion, chemical & weather carbonation effect coupled with complete waterproofing.

Advantages:

• Self-curing
  


• Resists carbonation effect
  


• Increases overall structural durability
  


• Resists water pressures up to 5 bars
  


• Offers excellent adhesion cum waterproofing to most building substrates
  

VITCON 2009 RAINKOTE [Impregnated Coating]

VITCON 2009 RAINKOTE is a polymer based liquid which is used with a simple brush or spray to form a thin elastomeric film covering all hidden cracks and porosity & shielding the wall from penetrating of water for several years. It also prevents fungi & algae formation in walls & has very good penetrating ability.

Specifications:

• Appearance: Colorless liquid
  


• Sp. Gravity: 1.01 ± 0.02
  


• pH Value: 8 - 9
  


• Chloride content: Nil
  


• Shelf life: 12 months
  
  

VITCON 2012 FLEXIKOTE [Acrylic Waterproofing Flexible Coating]

This elastomeric chemical is based on acrylic based coating which is ideal for waterproofing applications. The high solid acrylic content makes VITCON 2012 FLEXIKOTE more durable & effective for protection of concrete as well as metal structures.

Advantages:

• Excellent resistance to ultraviolet radiation
  


• Excellent bonding to all building substrates
  


• Forms a durable waterproofing breathable coating
  


• Reduces water permeability
  


• Improves resistance to alkali 7 carbonation effect

VITCON 2013 SBR


VITCON 2013 SBR is a styrene butadiene copolymer emulsion specially formulated & modified to be compatible with cemetitious mixes. The high flexibility of the copolymer makes the product best suitable for any structural repairs & waterproofing applications. VITCON 2013 SBR is also resistant to hydrolysis & suitable to be used in external applications.

Advantages

• Excellent adhesion to most building materials.


• Improves bonding to substrate.


• Suitable for use in damp conditions


• Reduces water permeability.

Backed by our sophisticated
manufacturing facility we are able to formulate premium quality
segment jointing material. We use qualitative raw material to offer
excellent adhesion to concrete and improving bonding between base
surface and subsequent overcoats. Our range comprises of the
following:

VITCON 2023 PRIMER SB [Solvent
Base Bituminous Primer]

This is a cold applied bituminous
primer, which can be applied either by brush or spray. It is used as
a primer on steel and concrete substrate before applying torch-bond
membranes. VITCON 2023 Primer SB offers excellent adhesion to
concrete and improves bond between base surface and subsequent
overcoats.

Advantages:

• Sufficient pot life
  


• Economical and easy availability
  


• Excellent resistance to corrosion
  elements
  


• Easy application - Single
  component
  

Specifications:

• Viscosity (in Ford Cup. No.4, at
  250C): 20 ± 2 Seconds
  


• Specific Gravity (at 250C): 1.10 ±
  0.10
  


• Superficial drying time (at 250C):
  120 Minutes
  


• Complete Drying time (at 250C):
  24-36 Hours
  


• Finish Appearance: Semi-gloss
  


• Dry Film Thickness: 100-150 Micron