We offer horizontal boring machine, which are incorporated with column, bed and saddle. We also offer horizontal facing machine. Made of qualitative castings, our range is integrated with well ribbed box-form, which helps in power transmission.

Spindle : The boring spindle is made of special steel with a super-finished surface and guided in a sturdy milling spindle in two long bronze bushes. The milling spindle rotates in two high-precision Timken taper roller bearings, automatics axial travel of boring spindle is a standard feature.
Rotary table : The table has both rotary feed and rapid circular movement as standard features. It can be clamped in any angular position as graduation of degrees are there.

Specifications:

Boring spindle diameter / taper	70 / n 0.5 mm / taper
Facing head diameter	19"-480 mm
Max. Facing diameter	380 mm
Max. Turning diameter	600 mm
Table	990* 760 mm
Weight admitted	2500 kg

Speeds:

Boring spindle	12-470 no / r.p.m
Facing head	12-200 no / r.p.m

 Feeds: For all traverses

Low	0.05 mm / r.p.m
High	0.1 mm / r.p.m
Rapid feed	5 mm / r.p.m

 Traverses :

Axial of boring spindle	460 mm
Radial of slide in facing head	190 mm
Vertical of Head Stock	920 mm
Cross traversal of table-Cross travel	940 mm
Longitudinal of table	910 mm

 Distances :

Spindle axis to table top (min)	75 mm
Job admit between facing head & stay	1905 mm

 Rotary table :

Clamping surface	945* 715 mm
Size of 'T' slots	23 mm
Pitch of' T' slots	95 mm
No of' T' slots	7 mm

• Power required : 5 HP/440 v/50 Az
• Approximate weight of machine : 755500 kgs
• Overall dimensions (approx) : L * W * H-4080* 1730*2270

Send Business Enquiry

We offer superior quality pillar drilling machine (all geared pillar drilling machine). These are incorporated with parts like spindle gear box, feed gear box, drill spindle and others to ensure optimum performance to the end users.
 
Features:
 
Spindle gear box : The spindle gear box has 8 mechanical speeds from 90 to 885 RPM. These are made from steel. The totally enclosed 2 H.P. motor is directly coupled with gear box. Further, the levers for changing the speed are avoided by means of providing special gear system.
 
Feed gear box: The feed gear box has 2 feed, 0.05 & 0.1 for the vertical movement of the RAM.
 
Automatic feed with auto stop : As the usual hand feed is with the machine, we provide automatic feed arrangement with it.
 
Drill Spindle: The drill spindle is made from superior quality steel. Moreover, we also provide taper roller bearing with drill spindle
 
Drill head & table arm: Both can be raised, lowered and turned round the column.
 
Specifications: 

Drilling Capacity in cast-iron	45 mm
Drilling Capacity in Mild Steel	32 mm
Distance of column to spindle centre(15")	381 mm
Maximum clearance spindle nose to table	965 mm
Minimum clearance spindle nose to base	1435 mm

Send Business Enquiry

We offer radial drilling machine (All Geared Radial Drilling Machine), which are incorporated with column, bed and saddle. The detail specification is as under :

Base : The base is a one-piece casting of heavy proportion and rigidly crossribbed on the underside to prevent any bowing effect under heavy loads. A reservoirforcoolentis cast integrated with base.The 'Tee' slots on the surface are machined and the surface is handscrapped.
 
Column : It is of a high Brined Hardness number suitable for it's purpose. As there are no rotating joints there in, it is quite rigid.
 
Arm : Automatic vertical movement of Arm is provided with direct coupled flange moior on the Bracket. The lead screw will not rotate even while automatic movement will be in operation. Arm is adjustable to any angular position.
 
Drill Head : Drill Head is mounted on an Arm. The electric motor is directly mounted on drill head. Eight different speeds from 90 to 860 rpm. are obtained by changing levers. Automatic feed mechanism is provided for vertical traverse of Quill.
 
Spindle : The Toughned spindle is made of high grade alloy steel is carried in preloaded taper roller bearings to absorb reverse thrust and radial loads produced by drilling and boring. The spindle rotates and slides in ball bearings.
 
The machine is supplied with two Electric Motors. Coolent pump, Pipe fittings, Table etc. Electricals are suitable for 440 Volts, 50 cycles, 3 phase, A.C. supply. 

Attachment/or Accessories at an extra cost:
1. Double Column Arrangment with Taper Rollers Bearings on Top & Bottom.
2. Automatic Horizontal Movement of Drill Head Mechanism for Keyway Milling and Facing Works.
3. Big Work Tableof size: 600mm. x 450 mm. x 300 mm.
4. Boring Bar having MT-4 Tapper for boring works.
5. Drill vice 6".
6. Quili Movement 225 mm.
7. Drill chuck 3/4" with Arbour & Intermediate Sleeves.
8. Machine Lamp.

 Technical Specification:

Drilling capacity in cast-iron	45
Drilling capacity in Mild steel	38
Quill movement	170
Maximum Center Distance between Column & Spindle	1015
Minimum Center Distance between Column & Spindle	390
Maximum Distance between Spindle & Base	1130
Minimum Distance between Spindle & Base	310
Working Surface of Base. L x W	890 x 610
Working Surface of Table	460 x 330
Vertical Traverse of Arm	860
Column Diameter	200
Number of Spindle Speeds	8
Range of Spindle Speeds	90, 140, 160, 255, 300, 470.540, 860
Number of Spindle Feeds (0.1 & 0.15mm.)	2
Shipping Dimensions	L1820xW.800xH.1880

Send Business Enquiry