'HEM' series of research electromagnet are high power electromagnet have "H' frame construction, these are usually mounted at 45 degrees. The yoke and poles are forged from high grade iron. It is magnetically soft steel of low carbon content.

The pole pieces are screwed directly on the yoke which assures best mechanical stability. This construction allows optimum parrallity of the pole faces which is the major factor determining improved homogenity and reproducibility of field values up to highest field strength.

The 'HEM' series electromagnet's are available from pole diameter of 75 mm to 400 mm. Continuously variable pole gap is available from pole diameter of 75mm to 150mm.  A wide range of pole caps are available for use with the basic magnet Especially for NMR and ESR, constant gradient caps for "faraday balance' exterments etc.  For different application a wide range of support bases and measuring devices are available.

Laboratory electromagnets are simple 'U' shaped electromagnets. The air gap is continuously variable with two way knobbed wheel sctew adjusting system and the poles are then locked in any position. Two continuous wound coils are mounted on two poles which are fitted to two yoke and supported on coil shoes. Magnetic field strength up to 14,000 Gauss in an air gap of 10mm is available with these electromagnets. Available in pole diameter from 30mm to 100mm.

The 'QM' series of bipolar electromagnet are base mounted bhaving a single mounting position. This type of design allows the sample to be mounted from any position. These have continuously variable air gapand the coil are pancake wound by flat copper conductor. For long operation water cooling is provided. Available from pole diameter of 75mm and 100mm with field intensity of 14,000 Gauss in 10mm.

'CCPY' series of magnet power supply are constant current sources which are continuously adjustable from 0 to full value, suitable from driving heavy inductive load like Electromagnet. They have long term stability of 0.03% and have protection against sthort circhit, overload, over voltage, over current etc Available in current range upto 300 Amps and output power of 30 KW.

'BCS' series of bipolar power supply are bipolar constant current sources with continuously variable output current from -ve full value through zero (0) to ve full value ( without mechanical reversing switches or contactors ). These are available for current ratings upto 150 Amps and Power Rating of 20 KW.

Digital gaussmeter is a based on Hall Effect. These usually have a hall probe made out of semiconductor like Gallium arsenide, indium antimonide, germanium etc. Standard models available are useful for measuring DC magnetic field upto 20 KGsuss with a resolution and resolution of 0.1 gauss. Various models are available like laboratory table top, portable hand held, auto ranging, to measure ac flux density etc.

Digital fluxmeter is based on integrator and Lenze law. These have search coil as input transducer, which suits for a particular requirement. Various types of models are available such as standard laboratory table top model, with scale factor adjustment, autoranging, etc.

'IM' series of impulse magnet charger are energy storage capacitor discharge type magnet charger. These are apable of charging various types of magnetic materials from Alnico, Ferrites to Rare Earths, in any intricate shape & dirrerent sizes, from simple diapole to complex multipoles. Whatever may the application 'IM' Series of impulse magnet charger will serve the purpose. Available in power capacities from 150 Joules to 30,000 Joules.

'TIM' series of magnet charger are basically used for magnet charging as well as calibrating purpose. There is a impulse magnet charger and a half cycle pulse generator having variable frequency and variable amplitude/single shot facility. The instrument has application in calibrating, aging, partially knocking down of field strength of a magnet assembly.

Various types of magnetizing fixtures are available for different applications, either to magnetise magnets or assemblies, calibration or for demagnetising. These fixture are made out of high permeabillty magnetic material, air core or laminated core. Also single conductor fixture can be designed and supplied for special application.

Magnetic measuring systems are available for studies, measurement and characterization of magnetic materials. Some of the system we offer are

• B-H Loop Tracer for Moderately Soft and Hard Material.
• Coercivity Meter.
• Permeability Meter.
• Sigma Meter.
• Gouy's & Faraday's Balance for magnetic Susceptibility studies.

Apart from manufacturing electromagnets for Laboratory & reasearch purpose. We have also manufacture quadrupole magnet along with

• Quadpupole Magnets.
• Steering Magnets.
• Switching Magnets.
• Orientation Magnets.
• Solenoid Magnets.
• Electromagnet generating a Cusp Magnetic field for Plasma Physics application.