Pharmaceutical Equipment

More sensitive Triangular or Flat ,Our own make, 200 gm weighing capacity, accuracy 0.1 mg with sunmica top in show case (Teak wood).Varanasi make also available.

BM-I Binocular observation head inclined at 45° of the horizontal at 360°. Assembled from IMPORTED PRISMS to ensure highly accurate colimation for strainfree observation. Adjustable interpupillary and dioptic distance. Heavy duty quadruple revolving nosepiece with clickstop.Fitted with co-axial mechanical stage. Built in base HALOGEN illumination system 6V-20W lamp. Electronic system for variable light stepless control. Also provided with piano concave reflecting mirror attachment for day-light use.

Optics : Only best quality objectives and Eyepieces are supplied to provide finest performance. These are PARAFOCALISED and PERCENTERED with microscope after the most strignet test.

BM-l(a) Supplied with optics.

Eyepiece: H 10x (Paired) & H 5x (Paired)

Objectives: 5x,10x,45x,100x (Spr ing loaded)

BM-l(b) Supplied with optics but 100x imported oil immersion assembled by us.

Eyepieces: H 10x (Paired) & H5x (Paired)

Objectives: 5x,10x,45x,100x (Spr ing loaded)

BM-l(c) Supplied with all IMPORTED DIN Standard optics assembled by us as under.

Eyepiece: 10X W.F. (Paired) & H5X (Paired)

Objectives: 10x,45x,100x (Spring loaded)

BM-l(d) Supplied with all IMPORTED JAPANESE make objectives.

Eyepiece: 10X W.F.(Paired) H5x(Paired)

Objectives: 10x,45x,100x (Spring loaded)

Supplied in THERMOCOLE BOX in wooden-cabinet with instruction manual.

ATOMIC MODEL SET
These sets consist of moulded balls of different colours and sizes along with connecting lugs of different sizes. These sets are very helpful in modeling different organic & inorganic compounds.

SENIOR SET : This set consists of 185 lugs & 370 balls of prescribed colours & sizez packed in a moulded box having separate space for every particular colour & size of ball.
JUNIOR SET : This set consists of 37 connecting lugs & 75 balls of different colours & sizes packed in a moulded box.
Material : Polystyrene

CODE NO.	PARTICULARS	PACKING
58001	Senior Set	1 pc
58002	Junior Set	1 pc

Portable entirely made of seemless aluminium with safety valve, pressure gauge high class quality gasket pressure. 15 IBs handle and iron stand also provided size 12" x 12" (300 x 300mm). electric operated. See CAT No. 2022 to 2024 for other sizes.

Designed for low temp. incubation and routine determination of Biochemical Oxygen Demand (B.O.D.) The unit is composed for tripple walled chamber with a thick layer of fine glass wool to prevent loss of heat. For lower temperature work, a cooling unit is provided at the lower portion of working chamber and heating arrangement has been made in the inner chamber for work at higher temperature. The temperature varies from 5°C to 50°C adjustable to any desired point by means of a high precision digital temperature controller indicator within the variation of 1°C. Air Circulation fan has been provided to keep the temperature uniform inside the chamber. Inner chamber is fabricated from thick aluminium duly anodized/SS sheet & outer body is sprayed in white stove enamel finish.Three removable shelves are provided. Toggle switch, digital temp.controller indicator and indicating lamps are located on the instrument for easy handling and visibility. Complete with automatic internal light, connecting cord & plug to work on 220 Volts A.C.

Inner Chamber size of Aluminium and Stainless Steel:

a) 505x415x830mm (20"x 16.5" x 32") ( W x D x H) ........(6.1 c.ft.)
b) 565x565x865mm (22.5"x22.5"x34.5") .......(10 c.ft)
c) 650x580x900mm (26"x23"x35") ............. ( 12 c.ft)

Other sizes on request.

Workable on 220V 50 Hz. Housed in steel cabinet. Socket or Band-Switch provided for Selection of Volts output, with ON/OFF switch and main indication.

Model PSAW-23	2 to 6 V 1 Amps
Model PSAW-24	2 to 12 V 2 Amps
Model PSAW-25	2 to 12 V 3 Amps
Model PSAW-26	2 to 12 V 4 Amps
Model PSAW-27	2 to 12V 5 Amps
Model PSAW-28	2 to 12V 6 Amps

Higher Voltage/current Battery Eliminators and Chargers can be manufactured on demand

We are identified as one of the celebrated Medical Bicycle Ergograph Manufacturers in India. The Bicycle Ergograph is designed ideally to measure the work capacity of a muscle or group of muscles during contraction. Additionally, customers are eased with the availability of the Wooden Stand Bicycle Ergograph loaded with all the advanced features.

a) Prism Type : Lemon optical glass prism specially designed hangs over the eye-piece of the microscope. The pencil on the graph is visible moving on the image is drawn on the graph, very compact in design, Prism will be silver coated one side and it will be packed in velvet box.

b) Mirror Type : with this unit it is possible to draw the image seen in the microscope. The mirror reflects the pencil point image into an abbe prism clamped over the eye-piece and superimposes it up on the. specimen image. The prism box is hinged for quick change of eye-piece for normal observation complete in velvet box.

CAPSULE FILLING MACHINE

A versatile lever operated semiautomatic machine for various operations with levers is order of

1. plates for putting of capsule by hand

2. removal of caps

3. filling of powder by dispensing of brush pressing

4. fixing of caps and sealing

5. Injection of capsules.

Contact parts of stainless for 100 capsules of size 0 to 2 or 5 (anyone size in order). -do- capacity of 200 capsules at time.

We are providing to our clients, Split Type Hanging Clamps with Double Nut or Nail which are used in horizontal and vertical suspension and ceiling suspension of pipes.

This balance ha a lacquered brass beam engraved 50 scale divisions to each side. Each scale division represents 1/5 mg rider on the scale. The pillar is finished in lacquered with nickel plated fittings and detachable pans which are suspended from double hooks. Mounted on a sunmica wooden base with leveling screws and housed in teak wood case, with front slider and panel doors. (Supplied w/o weights)
Specifications :

Knife Edges:	Agate
Bearing:	Agate
Capacity:	200g
Sensitivity:	0.1 mg
Pans:	Inverse stainless steel, dia 70 mm
Overall:	365x265x455 mm
Dimensions:	(lxbxh)

(Electric operated) with 4 tubes. (b) -do- with 6 tubes.

Our range of automatic Aluminium collapsible machines is high on consistent performance as well as durable. These machines are mainly used in pharmaceutical along with cosmetic industry and are available with us in different designs & various technical specifications in order to meet the industrial requirements.

(Conductivity Meter) Digital Type : Reliable & Accurate Test Instruments for municipal & Industrial Aqueous solutions.

Display : 4 digit LED

Range : Conductance 0.1 micro mhos to 1000 mmhos in 5 Ranges

0-200mmhos, 2mmhos, 20mmhos, 200mmhos, 1000mmhos

Resistance : 0.1 ohm to 2m ohms in 5 ranges 0 to 200 ohms &. 2Kohms.

Accuracy : Conductance: 0.5% of range +/- 1 digit

Resistance: 0.5% of range +/- 1 digit

Cell Constant: Using potentiometer on adjustment display (digital setable).

Oscillator : 50Hz and 1000 Hz Auto-selectable (Excitation

Input frequency

Power Supply: 220/230volts + 10% 50Hz AC.Built in stabilizer

Supplied with conductivity cell, Dust cover and instruction manual.

Optional Arrangements :-

1. Automatic temperature co-efficient compensation from 0 to 70°C with PT 100 sensor.

2. Temperature indication 0 to 100

3. Recorder output facility.

Made from thick brass pipe chrome plated German pattern packed in card board box. Set of 6 borders.

For drilling uniform and straight holes in cork or rubber stoppers. Cast-iron frame with wood platform 10 cm diameter to support work and adjustable guide rod, central hole through wheel spindle for ejector rod and introduction of lubricant(water or methylated spirit). Complete with set of 12 nickel-plated borers cutting sizes from 7 to 25 mm.

We manufacture Cover Glasses/Cover Slips from the best quality of Borosilicate Cover Glass procured from Germany.

Digital Colony Counter 6 digit LED display, Range 0-999999 Spare Pen for Colony Counter

Range 340 to 960mm. with facility for Automatic concentrating, % transmission and U.D. measurement, wave length resolution 5mm.3.1/2 digit L.E.D. display with round test tubes.

Note : Above spectrophotometer can be supplied with a set of square quvettes at an additional cost .

b)U.V. I. R.SPECTROPHOTOMETER: Is a high resolution , reliable & versatile, single beam manual instrument for both qualitative and quantitative absorption spectrophotometric studies, wave length 200 to 900nm or 1000 nm, with digital display system.

Chemicals or small objects up to 100 gm can be weighed to within 15 mg with this economical model. The brass beam support is mounted on the wooden base (sunmica top) equipped with a drawer for holding weights and other equipments. Without weights. Cat. No. Capacity 1) 50 gms. 2) 100 gms.

The apparatus consists of 4 parts. A water bath with 500 watt heater covered 1000 mI. vessel made from Borosil glass and digital temperature control. Variable speed motor, with 30cms longs stainless steel shaft. A cylindrical stainless steel basket and a membrane fixing attachment, water bath is made of imported thick Acrylic sheet with transparent cover at top. Temperature of the bath is maintained at 37°C with an accuracy of ±1° C.A cylindrical glass vessel of 1000 ml. capacity with slightly concave bottom has a flenged edge at the top to accept a fitted cover having four holes. One hole placed in the centre. The shaft of the motor is fitted on an up right and has an electronic speed regulating device that allows the speed to be varied from 25 to 250 R.P.M. The shaft is 6 mm dia. 30 cms on with basket fitted at end rotates smoothly and without any significant wobble. The basket consist of two parts one of which is attached to the shaft. It is of solid metal except for 2 mm vent and is screwed on the main shaft.Lower part of the basket is held with this part by means of threading and this allows proper removal of lower part for introduction of the test samples. The detachable part of the basket is fabricated of stainless steel mesh formed into cylinder of size 36 mm x 25 mm dia. The equipment is workable on 220 volts 50 C/S A.C. but Analog type single stage.

Assisted by an experienced team of professionals, we manufacture a quality range of ECG Machine

Digital flame photometer with filters Na & K 2 ½ digit LED display along with compressor and other accessories. Medi flame photometer with Na & K filters. Results in meq/1 for medical use. 2 ½ digit LED display with compressor and other accessories.

Accessories Additional filter such as Na, K, Li, Ca each for flame photometer

Used to determine the durability and abrasivness of tablets. A transparent perpex drum (made of imported perspex sheet 6.4 mm thick) 300 mm dia x 35 mm. deep and -white cover disc and nut, also a shaped radial fixed blade which carries the tablets along with it up to the central height and lets them off while the drum is rotating. Thus the tablets rub against each other without any hard impact. The drum rotates at a fixed speed of 30 R.P.M. by a geared motor and the rotation period is controlled by a timer (imported time switch duration I to 15 minutes) per determined end preset. The motor unit is housed in a shaped steel cabinet with shaft extended on one side upon which the drum rotates. Switches with neon indicators and time switch are fitted on a panel and provided work on 220 volts 50 C/s A.C.Digital models are also available.

(b) -do- same as above, but with double drum.

ooden with sunmica. basic unit with table, with F.R.P. wall lining, flourscent light, complete with exhaust system, fume duct PVC (PRF).

Working Area :

a) 2' x 2' x 2'

b) 3' x 2' x 2'

Fabricated out of thick wooden board. It is designed so as to throw-out all toxic/harmful vapors & fumes thus protecting costly instrument and the persons working in the lab. Outer is finished with sunmica and inner epoxy painted. Working table top is acid/alkali resistant and a small wash basin with connections provided for inlet and outlet of water. The front door moves vertically up and down with concealed counter balanced weights. The unit is fitted with fluorescent light and a gas cock for gas/air supply. The front facing panel is fitted with 15/5 Amp socket with switches for exhaust system and fluorescent light. To work on 220/230 volts A.C. Supply.

	(A)	(B)	(C)	(D)
Working Chamber size:-	3’x2’x2’	4’x2’x2’	5’x2’x2’	6’x2’x2’

OPTIONA:-
I) High CFM exhaust system (for duct exceeding 10 feet length)
iii) S.S. Lining on work bench.
iv) PVC Fume Duct (per ft.)

We employ the most advanced compressor series available in the market.

Powder Coated , provision for 4 test tubes.Can be fitted on table top.

This machine is designed for both through feed and infeed grinding. New bed is designed with emphasis laid on higher rigidity and stability of machine.

Accuracy 2%, Built in amici prism and special light reflection system for colour elimination to obtain sharp critical boundary line and optimum contrast.
Hand Refractometer are available in three ranges

Cat. No.	Ranges
1)	0 to 32 %
2)	28 to 62 %
3)	58 to 92

It withstands high temperature up to 350°C. The body of the mantle is spun in one piece from non-rusting alumiPSAWm (Up to 5.0 liters capacity) duly finished in white stoving enamel/powder coated paint with mat finished colour combinations. All heating mantles are lagged with special grade mineral wool. Works on 220/230 Volts A.C.

Capacity	Wattage
50ml	60
100ml	60
250ml	150
500ml	200
1 Litr	300
2 ltrs	450
3 ltrs	450
5 ltrs	600

Extraction capacity 200 ml. flask capacity 500 ml. with standard joints made from Borosil glass.

(b) -do- fitted with Heating Mantle, Stand & Clamp

We make use of qualitative raw material such as cast iron, stainless steel and others in the production process of hot plate rounds for the top and the body is of thick mild steel which is available in painting.

A miniature for school to give general idea of the bones. Mounted on stand.

we offer high quality indicate temperature and humidity (various models available)

Thermostatically controlled by Thermostat ambient to 80°C with a sensitivity ±1°C Beaded heating elements are placed in ribs at bottom and sides. Double walled inside Aluminium or stainless steel and outside mild steel sheet painted with attractive enamel. Door has double glass viewing, built in Horizontal L-shape thermometer with perforated adjustable shelves, two pilot lamps, ON/OFF switch. To work on 220/230 volts A.C.

Inner Chamber size Aluminium & SS S.Steel

a) 300x300x300mm (12"x12"x12")

b) 350x350x350mm (14"x14"x14")

c) 300x400x400mm (16"x16"x16")

d) 450x450x450mm (18"x18"x18")

e) 600x450x450mm (24"x18"x18")

f) 600x600x600mm (24"x24"x24")

(Other sizes rates on request)

Automatic Temperature controller Digital, Timer & Air Circulating Fan can be fitted at extra cost .

high performance compact, dependable infra-red Moisture Balance for measurement of moisture content of materials not affected by radiation while loosing water under of moisture exposure to infra-red radiation.

(a) Microprocessor K.F. Moisture Titrator with built-in magnetic stirrer, Auto computation of moisture in ppm, %age and mg H2O, storage of Date, Time, Batch no. & final results of 20 titrations. K.F. reagent dispensing by motorised process. Final results are flashed on 8 digit display. External printer attachment facility available.

(b) Auto karl fischer Titrimeter (Deluxe model) having seperate control and stirring units with array of 10 LED’; buzzer auto zero burette, adjustable timer, dual platinum electrode and other accessories.

(c) Auto karl fischer Titrimeter with separate control & stirrer unit, auto zero burette, dual platinum electrode & other accessories.

ACCESSORIES ON REQUEST :-

a. Dual platinum electrode.

b. Burette clear glass (10mI.)

c. Titration vessel.

d. Reservoir bottle (500ml).

The kjeldahl digestion and distillation systems, we offer our clients are in compliance with international norms and standards.

Suitable for supporting glassware or bath. The height of top jack support accurately adjustable by easy rotation of the knob. Jacks are powder coated with very good finish.

Catalogue No.	Size of Top Plate Material
2127/01	8 x 7 Mild Steel
2127/02	8 x 7 Alluminium
2127/03	8 x 7 Stainless Steel
2127/04	12 x 14 Mild Steel
2127/05	12 x 14 Alluminium
2127/06	12 x 14 Stainless Steel
2127/07	20 x 20 Mild Steel
2127/08	20 x 20 Alluminium
2127/09	20 x 20 Stainless Steel
2127/10	25 x 25 Mild Steel

Available in SINGLE BASKET ,TWO BASKET, FOUR BASKET Used for determination of disintegration of time of Tablets.

Made from brass/gun metal machine made perfect shapes smooth and polished cavities. Nickel plated various capacities with a number of mould in each set. Capacity 1 gm , 1.5 gms & 2 gms (15.4 grains).

(a) 4-moulds set (b) 6-moulds set

(c) 12 moulds set

Note:
Other sizes and capacities on request can be supplied.

Electrically operated. Fitted with speed regulator.(Supplied with PTFE ball)

a) Without hot plate

b) With hot plate and energy regulator.

Light Weight, Compact design with folding facility in a small moulded luggage; Halogen bulb system, the equipment incorporates twin lamp facility, effective blower for super cooling to ensure undisturbed continuous operation for long duration.

Improved life time. Pinion lift. Range of fine vertical adjustment 15cms. Close mesh 10 speed gear box, gear ratios 1:2 no. Backlash. Instantaneous start at all speeds with built in vibration free, noiseless motor, speed variation from 1 rev. In 25 min. To i rev in ii hours. Permissible paper length 2. 5 meters, adjustable along machined 120 cm bed; automatic paper tensioning devices, flat writing surface attachment 3 jointed arm uprights with fine tangential adjustment, auxiliary cylinder with fine tilt adjustment to permit equalisation of tension at the top & bottom of the paper, neutralisation clutch for immediate start & stop, centralised electrical points for respiration pump, time clock and operation table, mounted on heavy metal platform with castora, with manometer & two way time marker.