Measurement Range :0.100 to 25.4 mm (0.004 to 1.0 in.)
Repeatability: ±0.25 μm (0.000010 in.)
 Linearity: ±0.9 μm (±0.000036 in.)
Measurement Area Depth Of Field: ±.75 x 25 mm (±0.030 x 1.0 in.)
Laser Beam Spot Size: 100 μm (0.004 in.)
Laser Beam Velocity: 50 m/sec. (2,000 in./sec.) Temperature Coefficient: <0.2 μm/°C (<0.000004 in./°F)
Calibration: Factory calibrated
Scan Rate: 100/sec

The Laser Speed 9000 is used on any continuous or discrete length measurement processes. The gauge is based on the proven Laser Doppler Velocimetry principle and made totally usable through its advanced auto-correlation measurement engine. An integrated light modulator gives the 9000 the capability to measure down to zero speed and reversing.

The accuracy of the LaserSpeed laser encoder will increase profits by:

• Reducing excess material being shipped to the customer
• Eliminating scrap
• Drastically increasing process uptime
• Eliminating buy backs from the customer
• 100% inspection

The LaserSpeed 9000 delivers proven results with:

• +/- 0.05% Accuracy (worse case)
• +/- 0.02% Repeatability
• Permanent Calibration
• No Moving Parts
• Non Contact Operation

Features

• Length & speed display (toggle between)
• Powers LaserSpeed gauge
• Dual-relay outputs
  • Relay 1 for approaching target length, which can be used to slow the line speed ready for change
  • Relay 2 for target length reached, which can be used to stop the line, automate roll change over, etc.
• RS232 connection for gauge setup
• Pass-through connection to control PLCs and other devices
• Laser interlock key switch

The LaserSpeed 4000 is used on any continuous process. The gauge is based on the proven
Laser Doppler Velocimetry principle and made totally usable through its advanced auto-correlation measurement engine.

The accuracy of the LaserSpeed laser encoder will increase your profits by:

• Reducing excess material being shipped to the customer
• Eliminating scrap
• Increasing process uptime
• Eliminating buy backs from the customer

The LaserSpeed 4000 delivers proven results with:

• +/- 0.05% Accuracy (worse case)
• +/- 0.02% Repeatability
• Permanent Calibration
• No Moving Parts
• Non Contact Operation

The LaserSpeed 8000 is used on any continuous or discrete length measurement processes. The gauge is based on the proven Laser Doppler Velocimetry principle and made totally usable through its advanced auto-correlation measurement engine. The discrete part length measurement capabilities provides 100% quaility inspection.

The accuracy of the LaserSpeed laser encoder will increase profits by:

• Reducing excess material being shipped to the customer
• Eliminating scrap
• Drastically increasing process uptime
• Eliminating buy backs from the customer
• 100% inspection

The LaserSpeed 8000 delivers proven results with:

• +/- 0.05% Accuracy (worse case)
• +/- 0.02% Repeatability
• Permanent Calibration
• No Moving Parts
• Non Contact Operation

We provide PrecisionScan-2330-Diameter measurments.

Range-0.25 - 130 mm
Repeatability-±0.8 µm
Linearity-±5.0 µm
Diamention-990.6 x 254 x 254 mm

Range-0.25 - 115 mm
Repeatability-±0.8 µm
Linearity-±5.0 µm
Dimentions-990.6 x 254 x 254 mm

Range-2. 5 - 112 mm
repeatability-±0. 5 µm
linearity-±5. 0 µm
dimentions-990. 6 x 254 x 254 mm

OD Range:10.0 – 175
 mmGate size;200 mm
Resolution:0.0001 mm
Accuracy:±0.02 mm 3
Scan rate:500 scans/sec.
Dimension:749 x 1365 x 187 mm