|
| ||
|
| ||
| Home | Profile | What We Offer | Contact Us | Enquiry |
Showcase
|
We are offering our clients with Electronic Equipment that are widely appreciated by the clients due to their durability, reliability, easy installation and excellent performance feature. Conforming to international quality standards norms, our equipment are procured from the reliable and certified vendors of the market. In addition to this, our equipment are available in different sizes and designs along with various specifications to fulfill the demands of customers. |
PH Meter |
Our clients can avail from us PH Meters that are widely used for accurately testing the pH value of water. Precision-engineered, our meters are sourced from the reliable and certified vendors of the market, which make these as per industry norms and standards. In addition to this, all our meters find their applications in research laboratories and water treatment plants. |
|
Function Generator |
We offer our customers with Function Generators that are used for testing instruments. These are capable of generating multiple waveforms like sine, square and triangle at any needed frequency for switched decade in sub-ranges. Available in three models, these fulfill the requirements of our clients in terms of use and consumption. Moreover, our products are very easy to use, need less maintenance, easy to install and less power consumption. |
|
On Line & Off Line UPS Systems |
Industrial Automation |
| We have gained expertise in providing our clients with Industrial Automations that are widely appreciated by the customers due to their durability, reliability, easy installation, low maintenance and less power consumption features. All our products are procured from the reliable and authorized vendors of the market, who make these as per the international quality norms and standards. In addition to this, our products are available in various sizes and designs at market leading prices. |
|
Capacitance Meter |
| Backed by years of experience, we are capable of providing our clients with Capacitance Meters. These are available in different designs and sizes and are widely used in quality control departments, electrical & electronic industry. Used for measuring a wide range of capacitance values, these utilize solid state & low drift circuitry for assuring a stable reading and high accuracy under extreme weather conditions. |
|
Oscilloscopes |
| With the help of our efficient workforce, we are able to offer our customers Oscilloscopes that are sourced from the reputed manufacturers of the market. Our products are widely used in several industries and are known for their durability, reliability, corrosion resistance and easy installation. Further, these are available in different sizes, shapes and designs at market leading prices. |
|
MV Calibrators |
Backed by our capacious warehouse, we are capable of providing our clients with MV Calibrators. All our products are sourced from the certified vendors, who design these in accordance with international quality norms and are known for their accuracy, longer functionality, easy installation and less maintenance. Apart from this, all our products are widely used in several R&D departments, laboratories and industries for diverse applications. |
|
I.R. Tester |
We are engaged in providing our clients with I.R. Testers that are widely used to test the insulation resistance of electronic and electrical components in the range of million MEG ohm. These are best suited for testing resistivity of the insulating liquids, when used with oil cell as per IS. In addition to this, our testers have drift free operations and are protected against all overload as well as short-circuits.
Features:
|
|
Compact Sine wave power invertor |
| Power Inverter Charger (2500 watt, pure sine wave output) - True sine wave output (THD<3%); 1: Greegoo Code; 2: Pure sine wave inverter; 3: O/P Wattage: 2500W; 4: Bat. voltage: A:12VDC; B: 24VDC; C: 48VDC ; S: Solar charger, W: Wind generator charger, N: Normal charger current 5: Output: 1:110VAC; 2:220VAC. |
|
EMI Filter & Signals Conditioner |
| The Cabur Make EMI Filter, Surge Protection Devices (SPD ) & Signal Conditioner that prevent transitional impulsive over voltage,conducted via the mains power supply, the earth network or signal networks, from damaging electronic command and control systems and electronic appliances in general. Series BY7protection devices limit dangerous over voltage to standard levels tolerated by the appliances intended for use in Over voltage Category II or greater (impulsive over voltage max. 2.5kV) inzone protected from over voltage B and C (Zones 1 and 2) if the plant does not have a lightning, in protection zone C (Zone 2) if the plant has a lightning arrester, and are SPD inTest Class II as required by standards IEC1024, IEC1312-1, EN50083-1 in force (see figure1 the following pages)Where and how to use themIn accordance with current standards, series BY7 surge protection devices must be installed on incoming power lines to electrical distribution and control and command boards for automation, in order to guarantee immunity to the transistors of the equipment contained,such as PLC, industrial PCs, power supplies, inverters, etc.. For command and control boards, generally in Over voltage Category II according to IEC EN 644-1 to be compliant with EMC standards, maximum impulsive over voltage applied to equipment must be below2.5kV, as indeed is also required by EN61000-4-4, 4-5. If SPDs with residual over voltage of less than 2.5kV, which can be withstood by equipment, are not installed on command and control boards, over voltage may cause plant or machine failure or breakdown, with costs that certainly exceed the cost of the SPDs. Installation of SDPs is also required, in any case, inorder to comply with EMC standards and CE marking of the board.Performance They consist of a wiring socket that can be assembled onto a DIN rail and a removable protection module that contains the discharge, making it easy to disconnect the SPD during insulation tests or for quick replacement at the end of its working life. They are able to withstand ten 20kA impulses of Isc discharge current with impulse 8/20 and a single 40kAimpulse, which is statistically very rare. As required by the product regulations on the SPDs,the BY7 series is equipped with an automatic thermal cut-off device able to disconnect theline transformer in the event of failure, providing an indication of the failure discharge visible on the front of the unit and via a clean contact. When, after numerous discharges and years of service the module has deteriorated, it can be rapidly replaced by removing it from its base socket and replacing it with another, identical one, without disconnecting the power supply.Fuses and protection devicesBY7 series overvoltage discharges have an incorporated device that disconnects the transformer at the end of its working life (close to short circuit or short circuited). They must,however, be fitted with protection against short circuit current upstream and differential protection against indirect contact (generally already included in the installation). If installed downstream of highly sensitive differential protection devices, we recommend using the configuration with gas discharge (see layouts on the following pages). The diagrams below illustrate an example protection connection according to priority type. Note:
|
|
Mr. Jagdish Kayst
(Manager)
Plot No. 24 - 25, Parbhunagar, G - 05, Rajat Apartment, Annapurna Road
Indore,
Madhya Pradesh -
452 012,
India
Telephone:+(91)-(731)-4227485
© Powercon Electro Device & Systems. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited
|
Business Enquiry Form |
