Power Supply Systems

Switching power supplies (SMPS) offered by us is fabricated using quality raw material ensuring durability, high efficiency, long service life and low maintenance. Available in various technical specifications, the precision designed electronic products can be customized in accordance to client technical specifications. Highly reliable and rugged designed supplies are featured with very low ripple & noise and are suitable for continuous use.

Features:

• Universal / wide input range.
• Excellent line & load regulation.
• Over voltage / overload / short circuit protected.
• Battery charging option.
• CVCC / CV current limited option.
• Three year unmatched warranty on most of the models.
• Available in open frame / open card / din rail mounting / wall panel mounting / plug in module & 19 inch rack versions.

STANDARD SPECIFICATIONS :

INPUT	Voltage: 230V rms, single phase Voltage variation: 85V-270V / 170V-270V rms Frequency: 47Hz to 63Hz. EMI Filter / Transient suppression: Provided Inrush current : Limited through inrush limiter and soft start
OUTPUT	Voltage / Current : See table Line regulation : Better than 0.5% Load regulation : Better than 0.5% Ripple & Noise : Less than 1% peak to peak Short circuit protection : Continuous with automatic recovery upon removal of overload / short circuit Over voltage protection : Shut down type between 110% to 115% of rated V Recycle input to reset Hold up time : 20 milliseconds minimum at 100% load and lowest input voltage Overall efficiency : Better than 75% upto 100W rating Better than 80% upto 250W rating Better than 85% upto 750W rating Better than 90% for above 750W rating
PROTECTIONS	Input fuse Input EMI filter & transient suppression Input inrush current control Output over voltage Output overload and short circuit
ISOLATION	2.1KV rms for one minute between AC input & DC output terminals 1.5KV rms for one minute between AC input & case Insulation resistance > 10M ohms @ 500V DC between DC output terminals & case All the metal part are dead & connected to earth (case)
ENVIRONMENT	Operating temperature range : 0oC to 55oC Humidity : Up to 95% RH @40oC (non-condensing) Cooling : Natural / Forced air Degree of protection : IP20 (as per IEC 144)
OPTIONAL FEATURES	Output voltage adjustment potentiometer Power supply fail alarm through potential free relay contact

Our company manufactures and offer premium quality linear regulated power supplies in conformity to international standard. With adeptness in the domain, we can offer the electronic product in compliance to client specific requirements. Entire assortment is widely appreciated and accepted by various reputed clients based in India for its unique features

Features:

• Excellent line & load regulation
• Very low ripple & noise
• Over voltage / overload / short circuit protected
• CVCC / CV fold back current limiting
• Very high reliability
• Rugged design & engineering for continuous use
• THREE YEAR unmatched warranty on most of the models
• Available in din rail mounting / wall panel mounting / plug in module & 19 inch rack versions

STANDARD SPECIFICATIONS :

INPUT	Voltage: 230V rms, single phase Voltage variation: -15% / + 10% EMI Filter / Transient suppression : Provided
OUTPUT	Voltage / Current: CONTACT US WITH YOUR REQUIREMENT. Line regulation: Better than 0.05% Load regulation: Better than 0.05% Ripple & Noise: Less than 2mV rms / 10mV peak to peak Short circuit protection: Continuous with automatic recovery upon removal of overload / short circuit Over voltage protection: Shut down type between 110% to 115% of rated V Recycle input to reset
PROTECTIONS	Input fuse Input EMI filter & transient suppression Output over voltage Output overload and short circuit
ISOLATION	2.1KV rms for one minute between AC input & DC output terminals 1.5KV rms for one minute between AC input & case Insulation resistance > 10M ohms @ 500V DC between DC output terminals & case All the metal parts are dead & connected to earth (case)
ENVIRONMENT	Operating temperature range: 0oC to 55oC Humidity: Up to 95% RH @40oC (non-condensing) Cooling: Natural / Forced air Degree of protection: IP20 (as per IEC 144)
OPTIONAL FEATURES	LINE FAIL signal 10mSec prior to loss of output regulation Power supply fail alarm through potential free relay contact Remote ON/OFF

POWERCUBE is offering a complete range of switching mode power supply from 5W to 1kWatt. 

Special Features :

Wide range AC input

Compact design to occupy minium space.

Input transient suppression

Excellent line and load regulation.

Low ripple and noise.

EMC Protection and inrush limiting

Efficiency better than 80%

Protection : Overload /Short Circuit Protection/overvoltage

 

Powercube is offering a complete range of switching mode power supply from 5W to 1kWatt. 

 

Special Features :

Wide range AC input

Compact design to occupy minimum space.

Input transient suppression

Excellent line and load regulation.

Low ripple and noise.

EMC Protection and inrush limiting

Efficiency better than 80%

Protection : Overload /Short Circuit Protection/overvoltage