 |
|
|
 |
|
| Power Distribution Panels (PDB)
Power Distribution Panels are main source of power distribution in a industrial or commercial plant. The main power from distribution transformer is inducted by cables / bus ducts through main incomer ACB / MCCB. Various tappings are taken from main bus bar through individual ACB/ MCCB or SFU etc. for different departments. Measuring instruments such as Voltmeter, Ampere meter, Load manager, Multifunction meter, indicators etc are provided on incomer & as well as on out-going feeder as per customer requirement. This power distribution panel is a custom built product.
| |
 |
|
|
|
|
|
|
|
|
| Multiparty Metering Panels (MPMP)
This is a new concept recently launched in market where a textile cluster is promoted The main H.T. Metering is done at Transformer center & L.T. metering is done at Multiparty Metering panel. This gives L.T. Terrif benefit to the individual cluster consumer.
| |
|
|
|
|
|
|
|
|
|
| Motor Control Center Panel ( MCC)
This motor control center panels is exclusive tailor made product & is designed as per requirement of customer. Nos. of motors are started from this panel center & mostly these are DOL or Star- delta Starter motors. All the push buttons & indicators are mounted on panel or remote controlled.
| |
|
|
|
|
|
|
|
|
|
| Automatic Power Factor Control Relay Panel (APFCR)
This panel is essential part in every electrical installation. This is used to improve the power factor of the installation which gives benefit for terrif covers maximum demand, these are coming with Contactor Switching or Thyrister switching of capacitors. The capacitor steps are decided on nature of load in plant & design is based on information supplied by client.
| |
|
|
|
|
|
|
|
|
|
| Soft - Start Starter Panel
This has wide application where jerk less start with controlled inrush current is essential. This soft starter panels are cost effective for heavy equipments where mechanical damages are subjected, Sugar machinery & pumping schemes are basic customers.
| |
|
|
|
|
|
|
|
|
|
| Change Over Panels (Auto/Manual)
This panels are simple manual change over or auto change over of D.G. set & mains supply. The capacity of change over switches or contactors depends up on capacity of D.G. Set & mains supply.
| |
|
|
|
|
|
|
|
|
|
| Auto-Mains Failure Panels (AMF)
This panels are playing vital role in power supply system. The functioning of this panel start when the mains supply fails. The mains supply failure detected & necessary signals are provided to D.G. set supply source to start. Thus the stand by supply is made on time being. When the mains supply resumes the stand by supply is disconnected & the system goes on mains again. The panels are designs on the basis of plant capacity.
| |
|
|
|
|
|
|
|
|
|
| Special Purpose Machine Panels (SPM)
This panels are exclusively custom built & are manufactured as per specific requirement of customer. Logic inputs are provided to the PLC in panels as per requirement of the SPM & necessary command is given to the equipments on the machine.
| |
|
|
|
|
|
|
|
|
|
| Lift Irrigation Panels (LIS)
These panels are sued for lift irrigation schemes & basically built with Star- Delta or Auto transformer starters. Auto transformer with specific tappings are selected as per requirement. The transformers are oil immersed & are accommodated inside the panels for small capacities up to 100 Hp, and beyond that these are kept out side of the panels.
| |
|
|
|
|
|
|
|
|
|
| Auto Transformer Starter Panels (ATS)
These panel are normally required for water supply scheme & are manufactured according to the requirements. Oil immersed auto - transformer with standard tappings having oil level indicator & thermostat for temperature rise safety is fitted on transformer tank. The tappings are changed by timer similar to star delta starter & finally the motor runs on DOL.
| |
|
|
|
|
|
|
|
|
|
| Bus Ducts. L.T Minipillar, L.T / H.T. Feeder Pillar
Bus ducts are basically required for handling large current especially above 3000Amp These are used between mains transformer / D.G. Set to Main PDB / PCC panels. In higher Ammper rating cable termination becomes problem & bus duct is only solution for this.
L.T. Minipillars are used to distribute the power to small consumers in a apartments, commercial complex etc. Main supply is protected by HRC fuse set.
L.T / H.T. Feederpillars are used for distribution of power to more feeders from main.
The main power is terminated on bus bar & various tappings are taken for feeders in different parts of system in L.T. Feederpillar. All feeders are protected by HRC fuse Set.
| |
|
|
|
|
|
|
|
|
|
| Swaged Street Light Poles
Swaged type street light poles are manufactured as per IS 2713: 1980 part II. The poles are manufactured from ERW pipes having IS mark & manufactured by reputed manufacturers. These are available from 7 Mtr to 16 Mtr. long with single arm bracket to four arm bracket., swan head etc. The maximum bottom dia we can offer 165.3 mm where as min. top section dia 76.1 mm.
| |
|
|
|
|
Copyright © Deepak Industries, Kolhapur, All Rights Reserved (Terms of Use)
